Bonding of birch solid wood of sawmill surface roughness with use of selected thermoplastic biopolymers

• Autorzy: Gumowska Aneta , Kowaluk Grzegorz

Identyfikatory

DOI

10.5604/01.3001.0013.7731

• Języki publikacji: EN

Abstrakty

EN

Bonding of birch solid wood of sawmill surface roughness with use of selected thermoplastic biopolymers. The aim of the research was to determine the shear strength and in-wood damage share of the birch lamellas of the surface shaped by rotary saw cutting and bonded with use of selected thermoplastic biopolymers, like polylactide (PLA) and polycaprolactone (PCL), as well as with use of polypropylene (PP) as a reference bonding material. The results show that the highest mechanical properties have been achieved in case of PLA used as a binder.

PL

Łączenie drewna brzozy o chropowatości drewna tartacznego z wykorzystaniem wybranych biopolimerów termoplastycznych. Celem badań było określenie wytrzymałości na ścinanie i udziału zniszczenia w drewnie lameli brzozowych o powierzchniach ukształtowanych na pilarce tarczowej i sklejonych przy użyciu wybranych biopolimerów termoplastycznych, takich jak polilaktyd (PLA) i polikaprolakton (PCL), jak również z zastosowaniem polipropylenu (PP) jako referencyjnego materiału wiążącego. Badania wykazały najwyższą przydatność PLA do łączenia litego drewna brzozy, podczas gdy pozostałe wykorzystane w badaniach polimery dawały spoinę o niższych od wspomnianego polimeru wytrzymałości.

Słowa kluczowe

EN

solid wood; bonding; surface roughness; shear strength

• Wydawca: Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
• Czasopismo: Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
• Rocznik: 2019
• Tom: No. 106
• Strony: 9--15
• Opis fizyczny: Bibliogr. 15 poz., rys., tab.

Twórcy

autor

Gumowska Aneta

• Department of Technology and Entrepreneurship in Wood Industry, Faculty of Wood Technology/Institute of Wood Sciences and Furniture, Warsaw University of Life Sciences – SGGW

autor

Kowaluk Grzegorz

• Department of Technology and Entrepreneurship in Wood Industry, Faculty of Wood Technology, Warsaw University of Life Sciences – SGGW

Bibliografia

• 1. BATTEGAZZORE D., SALVETTI O., FRACHE A., PEDUTO N., DE SIO A.,MARINO F., 2016: Thermo-mechanical properties enhancement of bio-polyamides(PA10.10 and PA6.10) by using rice husk ash and nanoclay. Compos Part A Appl SciManuf 81:193–201; DOI: 10.1016/j.compositesa.2015.11.022.
• 2. BUGNICOURT E., CINELLI P., LAZZERI A., ALVAREZ V., 2014:Polyhydroxyalkanoate (PHA): review of synthesis, characteristics, processing andpotential applications in packaging. Express Polym Lett 8(11):791–808; DOI:10.3144/expresspolymlett.2014.82.
• 3. EN ISO 1302:2004 Geometrical Product Specifications (gps) – Indication of SurfaceTexture in Technical Product Documentation.
• 4. GAUGLER, M., LUEDTKE, J., GRIGSBY, W.J., KRAUSE, A., 2019: A newmethodology for rapidly assessing interfacial bonding within fibre-reinforcedthermoplastic composites. International Journal of Adhesion and Adhesives 89; 66–71.
• 5. HIZIROGLU, S., ZHONG, Z. W., AND ONG, W. K., 2014: Evaluating of bondingstrength of pine, oak and nyatoh wood species related to their surface roughness,Measurement: Journal of the International Measurement Confederation. DOI:10.1016/j.measurement.2013.11.053.
• 6. KILIC, M., HIZIROGLU, S., AND BURDURLU, E., 2006: Effect of machining onsurface roughness of wood, Building and Environment. DOI:10.1016/j.buildenv.2005.05.008.
• 7. KOWALUK, G., AND WRONKA, A., 2018: Density – induced Surface roughness ofdry formed fibreboards, Ann. WULS – SGGW, For and Wood Technol. 102, Annals ofWarsaw University of Life Sciences – SGGW, Forestry and Wood Technology № 102:75-81.
• 8. LIU, Y., LI, X., WANG, W., SUN, Y., AND WANG, H., 2019: Decorated woodfiber/high density polyethylene composites with thermoplastic film as adhesives,International Journal of Adhesion and Adhesives. DOI: 10.1016/j.ijadhadh.2019.05.008.
• 9. LUEDTKE J., GAUGLER M., GRIGSBY W.J., KRAUSE A., 2019: Understanding thedevelopment of interfacial bonding within PLA/woodbased thermoplastic sandwichcomposites. Industrial Crops & Products 127: 129-134; DOI:10.1016/j.indcrop.2018.10.069.
• 10. NAGARAJAN, V., MOHANTY, A.K., MISRA, M., 2016: Perspective on PolylacticAcid (PLA) based Sustainable Materials for Durable Applications: Focus on Toughnessand Heat Resistance, ACS Sustainable Chem. Eng. 4, 6, 2899-2916,https://doi.org/10.1021/acssuschemeng.6b00321.
• 11. PREMALAL H.G.B., ISMAIL H., BAHARIN A., 2002: Comparison of the mechanical properties of rice husk powder filled polypropylene composites with talc filledpolypropylene composites. Polymer Testing 21 (7): 833–839; DOI: 10.1016/S0142-9418(02)00018-1.
• 12. RAGHU, N., KALE, A., RAJ, A., AGGARWAL, P., CHAUHAN, S., 2018: Mechanicaland thermal properties of wood fibers reinforced poly(lactic acid)/thermoplasticizedstarch composites. J. Appl. Polym. Sci. 135 (15). DOI: 10.1002/app.46118.
• 13. YU .L, DEAN K., LI L., 2006: Polymer blends and composites from renewableresources. Progress in Polymer Science 31(6) :576–602; DOI:10.1016/j.progpolymsci.2006.03.002.
• 14. ZHENG Y., MONTY J., LINHARDT R.J., 2015: Polysaccharide-based nanocompositesand their applications.Carbohydrate Research 405: 23–32; DOI:10.1016/j.carres.2014.07.016.
• 15. ZHONG, Z. W., HIZIROGLU, S., AND CHAN, C. T. M., 2013: Measurement of thesurface roughness of wood based materials used in furniture manufacture, Measurement:Journal of the International Measurement Confederation. DOI:10.1016/j.measurement.2012.11.041.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).