Implementation of a system quality tool to reduce the costs of scrap loss in industrial enterprise

• Autorzy: Lestyánszka-Škůrková K.
• Języki publikacji: EN

Abstrakty

EN

This study focuses on reducing the costs of scrap loss in industrial enterprise through the quick response control methodology, used in quality management in the automotive industry. Its use can identify various influences causing problems is production, quality, logistics or management. The costs reducing in this study used tools and methods as QRQC, Global 8D, 5 Why, Is/Is Not as well as seven old statistical (japanese) tools, especially Pareto analysis. Using the QRQC methods there were found causes connected with scrap costs and were setted the corrective action to reduce the scrap costs.

Słowa kluczowe

EN

quality; scrap; costs reducing; problem solving; methods and tools

PL

zarządzanie jakością; redukcja kosztów; metodologia szybkiego reagowania

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Zeszyty Naukowe. Quality. Production. Improvement
• Rocznik: 2017
• Tom: No. 1 (6)
• Strony: 93--111
• Opis fizyczny: Bibliogr. 20 poz., rys., tab.

Twórcy

autor

Lestyánszka-Škůrková K.

• Institute of Industrial Engineering and Management, Faculty Materials Science and Technology in Trnava, Slovak University of Technology in Bratislava, J. Bottu 25, 917 27 Trnava

Bibliografia

• 1. AIKENS, C. HAROLD. 2011. Quality inspired management. The key to sustainability. New Jersey: Pearson Education, Inc., publishing as Prentice Hall. ISBN 10: 0-13-119756-8. ISBN 13: 978-0-13-119756-5. p. 623
• 2. ANDRÁSSYOVÁ Z. ET AL. 2011. Assembly process capability of automotive seats. In Acta Technologica Agriculturae, vol. 14, 2011, no. 3, pp. 74–78
• 3. FERANCOVÁ M. ET AL. 2013. Determining the capability of production equipment. In Advanced Materials Research. Vol. 801, special iss. (2013), p. 41 - 49. ISSN 1022-6680.
• 4. HRUBEC J. et al. 2009. Integrovaný manažérsky systém. Nitra : SPU. ISBN 978-80-552-0231-0.
• 5. JANKAJOVÁ E., KOTUS M. 2015. Reliability evaluation in the production process of aluminium castings. In: Production engineering archives. 6, 1 (2015), s. 49-51. ISSN 2353-5156.
• 6. KOTUS M., JANKAJOVÁ E., PETRÍK M. 2015. Quality control of aluminium melt in production process. In Research in agricultural engineering. 61, special iss. (2015), s. 43-47. ISSN 1212-9151.
• 7. HUBÁČIKOVÁ L. 2016. Implementation of system quality tool to reduce costs at Faurecia Slovakia with scrap ltd.. (diploma thesis). Trnava, STU. Supervisor: Katarína Lestyánszka Škůrková.
• 8. MIZUNO S. 1988. Management for Quality Improvement: The 7 New QC Tools. Cambridge, MA: Productivity Press.
• 9. PETRÍK J., GENGEĽ P. 2009. The capability of green sand mold strength and mold permeability measurement process. Acta Metallurgica Slovaca, Vol. 15, No. 2 (2009), . ISSN 1335 – 1532.
• 10. SÜTŐOVÁ A., GRZINČIČ M. 2013. Creation of Defects Catalogue for Nonconforming Product Identification in the Foundry Organization. In Quality Innovation Prosperity. . Roč. 17, č. 2 (2013), s. 52-58. - ISSN 1335-1745.
• 11. http://asq.org/learn-about-quality/idea-creation-tools/overview/affinity.html
• 12. http://www.skymark.com/resources/tools/relations_diagram.asp
• 13. https://www.inloox.com/project-management-glossary/tree-diagram/
• 14. http://www.syque.com/improvement/Matrix%20Diagram.htm
• 15. http://www.sixsigmadaily.com/process-decision-program-charts-pdpc/
• 16. https://ceopedia.org/index.php/Arrow_diagram
• 17. http://asqtoronto.org/resources/quality-tools/problem-solving-analysis-tools/
• 18. https://www.isixsigma.com/tools-templates/cause-effect/determine-root-cause-5-whys/
• 19. http://www.globalsources.com/NEWS/SIC-solve-your-production-issues-in-24-hours-with-qrqc.HTM
• 20. http://asq.org/learn-about-quality/eight-disciplines-8d/

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).