Analysis of the surface profile and its material share during the grinding inconel 718 alloy

• Autorzy: Novák M. , Náprstková N , Józwik J.

Identyfikatory

DOI

10.12913/22998624/2363

• Języki publikacji: EN

Abstrakty

EN

Grinding is still an important method for surface finishing. At FPTM JEPU research, which deals with this issue is conducted. Experiments are carried out with grinding various materials under different conditions and then selected components of the surface integrity are evaluated. They include roughness Ra, Rm and Rz, Material ratio curve (Abbott Firestone curve) and also the obtained roundness. This article deals with grinding nickel Inconel 718 alloy, when selected cutting grinding conditions were used and subsequently the surface profile and the material ratio curve were measured and evaluated.

Słowa kluczowe

EN

grinding; Abbott-Firestone curve; Inconel

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2015
• Tom: Vol. 9, nr 26
• Strony: 41--48
• Opis fizyczny: Bibliogr. 11 poz., fig., tab.

Twórcy

autor

Novák M.

• Faculty of Production Technology and Management, Jan Evangelista Purkyně University in Ústí nad Labem, Pasteurova 1, 400 96 Ústí nad Labem, Czech Republic

autor

Náprstková N

• Faculty of Production Technology and Management, Jan Evangelista Purkyně University in Ústí nad Labem, Pasteurova 1, 400 96 Ústí nad Labem, Czech Republic

autor

Józwik J.

• Faculty of Mechanical Engineering, Lublin University of Technology, 36 Nadbystrzycka Str., 20-618 Lublin, Poland

Bibliografia

• 1. Bauer R. Obrábění těžkoobrobitelných materiálů. 2008. [Available at: www http://www.mmspektrum.com/clanek/obrabeni-tezkoobrobitelnych-materialu.html – cit. 2014-3-13].
• 2. Byrne P. Turning milling and grinding processes. Arnold, London 1996.
• 3. INCONEL® alloy 718 (UNS N07718), 2007. [Available at: www http://www.hpalloy.com/alloys/ descriptions/INCONEL718.html – cit. 2014-3-13].
• 4. Novák M. Surface quality of hardened steels after grinding. Manufacturing Technology, 11(11), UJEP, Ústi nad Labem, 2011, 55–59.
• 5. Novak M. Surfaces with high precision of roughness after grinding. Manufacturing Technology, 12(13), 2012, 66–70.
• 6. Valíček J., Rusnák J., Müller M., Hrabě P., Kadnar M., Hloch S., Kušnerová M. Geometrické aspekty drsnosti povrchu klasických a netradičních technologií. Jemná Mechanika a Optika, 53(9), 2008, 249–253.
• 7. Kocman K. Optimalizace dokončovacích operaci výrobních procesů, Strojírenská Technologie, 17(3), 2012, 164–169.
• 8. Jusko O. Vývoj a inovace brousicích nástrojů. Strojírenská Technologie, 15(1), 2010, 17–22.
• 9. Novák M. Studium jakosti broušeného povrchu kalených ocelí, část I. – drsnost povrchu. Strojírenská Technologie, 16(6), 2011, 26–33.
• 10. Holešovský F., Novák M. Grinding and its influence to ground surface durability. Proceedings of International Conference on Advances in Materials and Processing Technologies, Paris. Amer INST Physics, Melville, NY, USA, 2010.
• 11. Kouřil K., Cep R., Janásek A., Kříž A., Stančeková D. Surface integrity at reaming operation by MT3 head. Manufacturing Technology, 14(2), 2014, 193–199.