PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Using FDTD method to the analysis of electric field intensity inside complex building constructions

Treść / Zawartość
Warianty tytułu
Konferencja
Computer Applications in Electrical Engineering (15-16.04.2019 ; Poznań, Polska)
Języki publikacji
EN
Abstrakty
EN
The aim of this article is to make a detailed analysis of the influence of the reinforcement diameter, the number of rows of reinforcing bars and the spacing between them for the values of the electric field intensity. The subject of the research is a model containing a wall made of concrete (dielectric) and reinforcement (conductor). Four reinforcement systems commonly used in building construction have been analysed. In addition, the influence of symmetry and asymmetry in the structure of bars on the values of field intensity determined for non-homogeneous material structures (reinforced concrete) was considered. For comparison, a concrete wall, without reinforcement (homogeneous material) was also analysed. Using FDTD method, the maximum electric field values generated by the Wi-Fi operating at the f = 2.4 GHz were calculated.
Rocznik
Tom
Strony
39--48
Opis fizyczny
Bibliogr. 14 poz., rys.
Twórcy
  • Białystok University of Technology
  • Białystok University of Technology
Bibliografia
  • [1] Ping L., Qi-tao Y., Yun-liang L., Analysis of electromagnetic propagation into reinforced concrete walls by FEM-PML methods, IEEE International Conference on Microwave and Millimeter Wave Technology, ICMMT 2008 Proceedings, pp. 1–4, 2008.
  • [2] Ping L., Xuewang W., The reflection and transmission properties of reinforced concrete wall, International Conference on Microwave and Millimeter Wave Technology, ICMMT’07, 2007.
  • [3] Drewnowski S., Understand constructions. Principles of concrete reinforcement, Częstochowa, 2002 (in Polish).
  • [4] Oskooi A.F., Roundyb D., Ibanescua M., Bermelc P., Joannopoulosa J.D., Johnson S.G., MEEP: A flexible free-software package for electromagnetic simulations by the FDTD method, Computer Physics Communications, Vol. 181, pp. 687–702, 2010.
  • [5] Taflove A., Hagness S.C., Computational electrodynamics, The Finite–Difference Time–Domain Method, Boston, Artech House, 2005.
  • [6] Piątek Z., Jabłoński P., Fundamentals of electromagnetic field theory, WNT, Warszawa, 2010 (in Polish).
  • [7] Yang M., Stavrou S., Three-dimensional modal transmission-line method for radio wave propagation through periodic building structures. IEEE Proceedings Microwaves, Antennas and Propagation, pp. 597–603, 2005.
  • [8] Choroszucho A., An analysis of the electromagnetic waves propagation in construction elements with a complex structure in the range of wireless communication, PhD dissertation, Białystok, 2014 (in Polish).
  • [9] Sadiku M.N.O., Numerical techniques in electromagnetics, CRS Press LLC, edition II, 2001.
  • [10] Dalke R.A., Holloway Ch.L., Mckenna P., Johanson M., Ali A.S., Effects of reinforced concrete structures on RF communications. IEEE Trans. Electromagnetic Compatibility, Vol 42(4), pp. 486–496, 2000.
  • [11] Chiba H., Miyazaki Y., Analysis of radio wave reflection and transmission characteristics at reinforced concrete slab by numerical simulation and scaled model experiment, International Symposium on Electromagnetic Compatibility, Japan, 19P301, pp. 424–427, 1999.
  • [12] Boryssenko A., Boryssenko O., Lishchenko A., Prokhorenko V., Inspection of internal structure of walls by subsurface radar, IEEE Aerospace and Electronic Systems Magazine, Volume 21, Number 10, pp. 28–31, 2006.
  • [13] Sadiku M.N.O., Numerical techniques in electromagnetics, CRS Press LLC, edition II, 2001.
  • [14] Van Damme S., Franchois A., Taerwe L., Comparison of two coaxial probes for the non-destructive evaluation of a steel fiber reinforced concrete layer, Proceedings of the 21st IEEE Instrumentation and Measurement Technology Conference, IMTC’04, Volume 1, pp. 579–582, 2004.
Uwagi
Acknowledgment. This work was prepared under scientific work S/WE/2/18 and supported by the Polish Ministry of Science and Higher Education.
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-fa084a8a-a903-4aef-900b-78f7c8a28b3a
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.