The influence of coolant velocity on the local heat transfer coefficient during steel quenching

• Autorzy: Szajding Artur , Gołdasz Andrzej , Telejko Tadeusz
• Języki publikacji: EN

Abstrakty

EN

The results of the calculations of the local heat transfer coefficient HTC and a heat flux HF on the face of a cylindrical sample made of 1.0503 steel are presented. The sample was cooled from a temperature of approx. 930°C in a mineral oil having a temperature equal to 50°C. The experiments were performed for three speeds of the oil stream (0.2, 0.4 and 0.6 m/s). The oil stream was directed perpendicularly to the cooled surface. The temperature of each sample was measured with 4 thermocouples and recorded with a frequency of 10 Hz. The maximum values of HTC always occurred in the axis of the sample and were in the range of 8000 to 10,000 W/(m2 K). The results are presented in the form of useful graphs showing the dependence of HTC and HF on the surface temperature for various velocities of cooling oil. The calculations were made with self-developed software using the inverse solution of the boundary heat conduction problem.

Słowa kluczowe

EN

inverse method; heat transfer coefficient; boundary condition; quenching

• Wydawca: Wydawnictwa AGH
• Czasopismo: Computer Methods in Materials Science
• Rocznik: 2020
• Tom: Vol. 20, No. 4
• Strony: 157--164
• Opis fizyczny: Bibliogr. 14 poz., rys.

Twórcy

autor

Szajding Artur

• AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Krakow, Poland

• https://orcid.org/0000-0001-5559-0771+

autor

Gołdasz Andrzej

• AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Krakow, Poland

• https://orcid.org/+0000-0002-0746-1112+

autor

Telejko Tadeusz

• AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Krakow, Poland

• https://orcid.org/+0000-0002-0382-4051+

Bibliografia

• Buczek, A. (2004). Zastosowanie brzegowego zagadnienia odwrotnego do identyfikacji współczynnika przejmowania ciepła podczas chłodzenia. Uczelniane Wydawnictwa Naukowo-Dydaktyczne AGH.
• Buczek, A., & Telejko, T. (2004). Inverse Determination of Boundary Conditions During Boiling Water Heat Transfer in Quenching Operations. Journal of Materials Processing Technology, 155–156, 1324–1329. https://doi.org/10.1016/j.jmatprotec.2004.04.192.
• Buczek, A., & Telejko, T. (2013). Investigation of Heat Transfer Coefficient During Quenching in Various Cooling Agents. International Journal of Heat and Fluid Flow, 44, 358–364. https://doi.org/10.1016/j.ijheatfluidflow.2013.07.004.
• Cebo-Rudnicka, A., Malinowski, Z., & Buczek, A. (2016). The influence of selected parameters of spray cooling and thermal conductivity on heat transfer coefficient. International Journal of Thermal Sciences, 110, 52–64. https://doi.org/10.1016/j.ijthermalsci.2016.06.031.
• Cengel, Y.A. (2011). Heat Transfer. A Practical Approach. McGraw Hill.
• Cui, X., Wan, M., Ma, B., Wu, X., & Han, J. (2019). Quenching by immersion considering boiling heat transfer. International Journal of Thermal Sciences, 139, 303–311. https://doi.org/10.1016/j.ijthermalsci.2019.01.039.
• Fletcher, R. (1987). Practical methods of optimization. John Wiley & Sons.
• Hernández-Morales, B., Vergara-Hernández, H.J., Solorio-Díaz, G., & Totten, G.E. (2011). Experimental and Computational Study of Heat Transfer During Quenching of Metallic Probes. In: A. Ahsan (ed.), Evaporation, Condensation and Heat transfer (pp. 49–72). InTech.
• Kim, H.K., & Oh, S.I. (2001). Evaluation of Heat Transfer Coefficient During Heat Treatment by Inverse Analysis. Journal of Materials Processing Technology, 112(2–3), 157–165. https://doi.org/10.1016/S0924-0136(00)00877-3.
• Kopun, R., Škerget, L., Hriberšek, M., Zhang, D., Stauder, B., & Greif, D. (2014). Numerical simulation of immersion quenching process for cast aluminium part at different pool temperatures. Applied Thermal Engineering, 65(1–2), 74–84. https://doi.org/10.1016/j.applthermaleng.2013.12.058.
• Sahai, V., & Aceves, S.M. (2001). Determination of Heat Transfer During Gear Blank Quenching. Heat Transfer Engineering, 22(4), 56–66. https://doi.org/10.1080/01457630118610.
• Sugiantoa, A., Narazaki, M., Kogawara, M., & Shirayori, A. (2009). A comparative study on determination method of heat transfer coefficient using inverse heat transfer and iterative modification. Journal of Materials Processing Technology,
• 209(10), 4627–4632. https://doi.org/10.1016/j.jmatprotec.2008.10.016.
• Taraba, B., Duehring, S., Španielka, J., & Hajdu, Š. (2012) Effect of Agitation Work on Heat Transfer during Cooling in Oil ISORAPID 277HM. Strojniški vestnik – Journal of Mechanical Engineering, 58(2), 102–106. https://doi.org/10.5545/sv-jme.2011.064.
• Trujillo, D.M., & Wallis, R.A. (1989). Determination of heat transfer from components during quenching. Industrial Heating,
• 56(7), 22–24.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).