PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Numerical and experimental research on delamination of glulam elements

Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Numeryczne i doświadczalne badania delaminacji elementów z drewna klejonego
Języki publikacji
EN
Abstrakty
EN
The paper presents numerical and experimental research on glulam delamination in a double lap connection with predominant shear stresses. Laboratory tests and wide literature survey enabled to determine timber and glue joint parameters. Cohesive zone theory, generally used for epoxy matrix and fiber reinforced composites, was adopted to modelling glue layer delamination in glulam elements. Numerical models were validated with laboratory tests.
PL
W artykule podjęto temat komputerowego modelowania połączenia dwu-zakładkowego w drewnie klejonym. Dokonano dwuetapowej kalibracji modelu numerycznego na podstawie badań laboratoryjnych. Próbki wykonano poprzez pocięcie belek z drewna klejonego, pomijając większe sęki lub połączenia lameli w celu uzyskania możliwie jednorodnego materiału. Zarówno w przypadku badań laboratoryjnych jak i w analizach numerycznych sterowano przyrostem przemieszczenia mierząc wartość siły pionowej.
Rocznik
Strony
15--29
Opis fizyczny
Bibliogr. 23 poz., il., tab.
Twórcy
autor
  • Lublin University of Technology, Faculty of Civil Engineering and Architecture, Lublin, Poland
  • Lublin University of Technology, Faculty of Civil Engineering and Architecture, Lublin, Poland
Bibliografia
  • 1. V. A. Franklin, T. Christopher, "Fracture Energy Estimation of DCB Specimens Made of Glass/Epoxy: An Experimental Study", Advances in Materials Science and Engineering, 2013.
  • 2. K. Kumar, S. Rao, N. Gopikrishna, "Evaluation of strain energy release rate of epoxy glass fibre laminate (mode - I)", International Education And Research Journal 3(1), 2017.
  • 3. B. R. K. Blackman, A. J. Kinloch, M. Paraschi, "The determination of the mode II adhesive fracture resistance, GIIC, of structural adhesive joints: an effective crack length approach", In Engineering Fracture Mechanics 72 (6), pp. 877-897, 2005.
  • 4. M. F. S. F. de Moura, R. D. S. G. Campilho, J. P. M. Gonçalves, "Pure mode II fracture characterization of composite bonded joints", In International Journal of Solids and Structures 46 (6), pp. 1589-1595, 2009.
  • 5. N. T. Mascia, F. A. R. Lahr, "Remarks on orthotropic elastic models applied to wood", Materials Research 9(3), pp. 301-310, 2006.
  • 6. G. Castro, F. Paganini, Holz Roh Werkst 61 291, 2003.
  • 7. S. Aicher, D. Ohnesorge, European Journal of Wood and Wood Products 69 143, 2011.
  • 8. Y. Jiang, J. Schaffrath, M. Knorz, S. Winter, J. W. G. Van de Kuilen, "Applicability of various wood species in glued laminated timber: Parameter study on delamination resistance and shear strength", WCTE 2014: Proceedings of the World Conference on Timber Engineering, 2014.
  • 9. D. H. de Almeida, R. S. Cavalheiro, L. B. de Macêdo, C. C. Neto, A. L. Christoforo, C. C. Junior, F. A. R. Lahr, "Evaluation of Quality in the Adhesion of Glued Laminated Timber (Glulam) of Paricá and Lyptus Wood Species", International Journal of Materials Engineering 4(3), pp. 114-118, 2014.
  • 10. E. Serrano, "Adhesive Joints in Timber Engineering. Modelling and Testing of Fracture Properties Division of Structural Mechanics", Lund University, 2000.
  • 11. S. Fortino, G. Zagari, A. L. Mendicino, G. Dill-Langer, "A simple approach for FEM simulation of Mode I cohesive crack growth in glued laminated timber under short-term loading", Rakenteiden Mekaniikka (Journal of Structural Mechanics) 45(1), pp. 1-20, 2012.
  • 12. V. Z. Wang, J. D. Ginger, K. Narayan, "Intralaminar and interlaminar fracture characterization in glued-laminated timber members using image analysis", In Engineering Fracture Mechanics 82, pp. 73-84, 2012.
  • 13. S. G. Lekhnitskii, "Theory of Elasticity of an Anisotropic Elastic Body", Mir Publishers, 1981.
  • 14. R. M. Jones, Mechanics of Composite Materials. Second Edition, pp. 55-73, 1999.
  • 15. B. Kawecki, J. Podgórski, "Numerical results quality in dependence on Abaqus plane stress elements type in big displacements compression test" Applied Computer Science, vol. 13, no. 4, pp. 56–64 (2017). doi: 10.23743/acs- 2017-29
  • 16. P. P. Gillis, Wood Science and Technology 6: 138, 1972.
  • 17. K. Song, C. G. Davila, C. A. Rose, "Guidelines and Parameter Selection for the Simulation of Progressive Delamination", ABAQUS Users' Conference, 2007.
  • 18. M. J. Lee, T. M. Cho, W. S. Kim, B. C. Lee, J. J. Lee, "Determination of cohesive parameters for a mixed-mode cohesive zone model", In International Journal of Adhesion and Adhesives 30 (5), pp. 322-328, 2010.
  • 19. M. Moslemi, M. Khoshravan, "Cohesive Zone Parameters Selection for Mode-I Prediction of Interfacial Delamination", Strojniški vestnik - Journal of Mechanical Engineering 61(9), pp. 507-516, 2015.
  • 20. B. Kawecki, J. Podgórski, "Numerical model of glulam beam delamination in dependence on cohesive strength" AIP Conference Proceedings 1922, 050005 (2018). doi: https://doi.org/10.1063/1.5019059
  • 21. S. Clauß, J. Gabriel, A. Karbach, et al, "Influence of the adhesive formulation on the mechanical properties and bonding performance of polyurethane prepolymers", Holzforschung 65(6), pp. 835-844, 2011.
  • 22. O. Kläusler, S. Clauß, L. Lübke, J. Trachsel, P. Niemz, "Influence of moisture on stress-strain behaviour of adhesives used for structural bonding of wood", In International Journal of Adhesion and Adhesives 44, pp. 57- 65, 2013.
  • 23. Z. Mróz, K. P. Mróz, "Analysis of delamination and damage growth in joined bi-layer systems", In Geomechanics for Energy and the Environment 4, pp. 4-28, 2015.
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-f90fa2a6-72bf-41a2-9474-5d112eee8ab7
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.