Press hardening - An innovative and challenging technology

• Autorzy: Neugebauer R. , Schieck F. , Polster S. , Mosel A. , Rautenstrauch A. , Schonherr J. , Pierschel N.
• Języki publikacji: EN

Abstrakty

EN

In view of the growing demand for high-strength, press-hardened sheet metal components and the increasing need for energy and resource efficient process-chains, the optimization of the press hardening process chain is a complex, multi-layered and challenging task. The aim of the present paper is to show the potential for optimization in the press-hardening process chain and to demonstrate initial implementation variants.

Słowa kluczowe

EN

press hardening; hot sheet metal forming; simulation; tribology; forming tool

PL

utwardzanie; formowania blach na gorąco; symulacja; trybologia

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2012
• Tom: Vol. 12, no. 2
• Strony: 113--118
• Opis fizyczny: Bibliogr. 8 poz., rys., wykr.

Twórcy

autor

Neugebauer R.

• Chemnitz University of Technology, Institute for Machine Tools and Production Processes IWP, Reichenhainer Straße 70, 09126 Chemnitz, Germany

autor

Schieck F.

• Fraunhofer Institute for Machine Tools and Forming Technology IWU, Reichenhainer Straße 88, 09126 Chemnitz, Germany

autor

Polster S.

• Fraunhofer Institute for Machine Tools and Forming Technology IWU, Reichenhainer Straße 88, 09126 Chemnitz, Germany

autor

Mosel A.

• Chemnitz University of Technology, Institute for Machine Tools and Production Processes IWP, Reichenhainer Straße 70, 09126 Chemnitz, Germany

autor

Rautenstrauch A.

• Chemnitz University of Technology, Institute for Machine Tools and Production Processes IWP, Reichenhainer Straße 70, 09126 Chemnitz, Germany

autor

Schonherr J.

• Fraunhofer Institute for Machine Tools and Forming Technology IWU, Reichenhainer Straße 88, 09126 Chemnitz, Germany

autor

Pierschel N.

• Chemnitz University of Technology, Institute for Machine Tools and Production Processes IWP, Reichenhainer Straße 70, 09126 Chemnitz, Germany

Bibliografia

• [1] A. Goschel, A. Sterzing, J. Schonherr, Balancing procedure for energy and material flows in sheet metal forming, CIRP Journal 4 (2) (2011) 170–179 (special issue).
• [2] L. Grabener, H. Hogele, Aktuelle Trends in der Umformtechnik, EFB Hochfeste und hybride Materialien Schnelle Umform und Fugeverfahren, T32, Hannover, 2011, pp. 13–33.
• [3] B. Klein, Leichtbaukonstruktion, Vieweg & Teubner, Wiesbaden, 2009.
• [4] R. Neugebauer, A. Goschel, A. Rautenstrauch, E. Meza-Garcia, Influence of the steel alloy composition on phase transitions and its applicability hot forming process, in: Proceedings of the Steel Research International Special Edition of the 10th International Conference on Technology of Plasticity ICTP 2011, Aachen, pp. 429–434.
• [5] R. Neugebauer, A. Goschel, F. Schieck, A. Rautenstrauch, A. Mosel, H. Cai, Enhancement of process stability and part quality for the press hardening of sheet meta, tubes and profiles, in: Proceedings of the 3rd International Conference on Hot Sheet Metal Forming of High-Performance Steel, 13th–16th June 2011, Kassel, pp. 229–236.
• [6] F. Schieck, C. Hochmuth, S. Polster, A. Mosel, Moderne Werkzeuggestaltung zur Bauteilgradierung unter Einbindung von Simulationsmodellen, effizienten Werkzeugkuhlkonzepten und Werkzeugbeschichtungssystemen, in: R. Neugebauer (Ed.), Energieeffiziente Produkt- und Prozessinnovationen in der Produktionstechnik, Wissenschaftliche Scripten, Zwickau, 2010, pp. 789–812.
• [7] M. Weber, Neue Schichtsysteme fur die Umformtechnik Werkzeugbeschichtungen fur die temperierte Umformung, Beschichtete Werkzeuge-hohere Wirtschaftlichkeit in der Ur- und Umformtechnik, EFDS Dresden, 2005.
• [8] VW AG: Highlights Leichtbau, Online Article, 2011.