Strength analysis for cycloidal gears with the new concept of power transmissions

• Autorzy: Biernacki Krzysztof

Identyfikatory

DOI

10.32056/KOMAG2021.4.3

• Języki publikacji: EN

Abstrakty

EN

The article presents a new design solution of hydraulic gerotor machines. The main attention was paid to the analysis of strain behaviour of a cycloidal gear set. The gears are the main assemblies of hydraulic gerotor machines, which are powered by driving the gear set. In the state of the art, the rotational motion of the gear set was effected by driving the inner gear. This article proposes a modified method of power transmission in which the outer gear is now a driving gear. Such a solution also results in modifications to the hydraulic machine design. This have led to a concept of a new hydraulic gerotor machine, which differs from the traditional designs. The device according to the new design is capable of carrying substantially higher loads than devices of the previous designs.

Słowa kluczowe

EN

strength analysis; plastics; Finite Elements Method (FEM); conceptual designing

PL

analiza wytrzymałości; metoda elementów skończonych; transmisja energii

• Wydawca: Instytut Techniki Górniczej KOMAG
• Czasopismo: Mining Machines
• Rocznik: 2021
• Tom: no. 4
• Strony: 25--36
• Opis fizyczny: Bibliogr. 14 poz., rys., tab., wykr., zdj.

Twórcy

autor

Biernacki Krzysztof

• Wrocław Univesity of Science and Technology, Ignacego Łukasiewicza 7/209a, 50-371 Wrocław, Poland

Bibliografia

• [1] Lewandowski K.: A change the structural of railway loading stations for containerization. LOGISTYKA No. 4/2012, ISSN 1231-5478, pages 483-494
• [2] Gamez-Montero P. J., Castilla R., Khamashta M., and Codina E.: Contact problems of a trochoidal gear pump. International Journal of Mechanical Science. 2006, (12)
• [3] Maiti R.: Active Contact Stresses at Epitrochoid Generated ROTOR-STATOR set of Fixed Axis or Equivalent system ‘ROPIMA’ type Hydrostatic units, ASME Journal of Engineering for Industry, 113(4):465-473.2. 1991
• [4] Biernacki K., Stryczek J.: Analysis of stress and deformation in plastic gears used in gerotor pumps. The Journal of Strain Analysis for Engineering Design, October 2010, vo.45, Issue 7, pages 465-479
• [5] Stryczek J., Bednarczyk S., Biernacki K.: Strength analysis of the polyoxymethylene cycloidal gears of the gerotor pump. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2014). Vol. 14, No. 4. Pages 647 – 660. http://dx.doi.org/10.1016/j.acme.2013.12.005
• [6] Stryczek J., Bednarczyk S., Biernacki K.: Gerotor pump with POM gears: Design, production technology, research. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2014, Vol. 14, No. 3. Pages 391 – 397. http://dx.doi.org/10.1016/j.acme.2013.12.008
• [7] Maiti R., Nagao M.: Prediction of Starting Torque Characteristics of Epitrochoid Generated Orbital Rotary Piston Hydraulic Motors, JSME International Journal of Mechanical Systems, Machine Elements and Manufacturing, C 42(2): pages 416-426. 1999
• [8] Nag A., Maiti R.: Unification of Epitrochoid origin profile design approaches for external lobed Star member used in hydrostatic and gear units. Institution of Mechanical Engineers Part-C: Journal of Mechanical Engineering Science, UK. May 24, 2012, 227(2), pages 299-310. DOI: 10.1177/0954406212448365
• [9] Stryczek J.: Cycloidal gears in design of gear pumps and motors. Habilitation Dissertation. Scientific Papers of the Institute of Machine Design and Operation of Wroclaw University of Technology. Series: Monographs nr 15. Wroclaw 1991
• [10] Antoniak P., Stryczek J.: Archives of Civil and Mechanical Engineering Volume 18, Issue 4, September 2018, Pages 1103-1115. https://doi.org/10.1016/j.acme.2018.03.001
• [11] Rusiński E., Czmochowski J., Smolnicki T.: Advanced finite element method in the load-bearing structures Publishing House of Wrocław University of Technology. Wrocław 2000
• [12] Smolnicki T., Harnatkiewicz P., Stańco M.: Degradation of a geared bearing of a stacker. Archives of Civil and Mechanical Engineering. 2010, vol. 10, nr 2, p. 131-139
• [13] Smolnicki T.: Large - size bearings in opencast mining machines. Design and selection of bulk material handling equipment and systems: mining, mineral processing, port, plant and excavation engineering. Vol. 1 / ed. by Jayanta Bhattacharya. Kolkata: Wide Publishing, 2012, pages 105-130
• [14] Banaszek J., Jonak J.: Podstawy konstrukcji maszyn. Wprowadzenie do projektowania przekładni zębatych i doboru sprzęgieł mechanicznych. Politechnika Lubelska. Wydawnictwo Uczelniane 2008, str. 26

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).