Characteristics of fans used in low-power boilers

• Autorzy: Bartoszewicz J. , Nygard A. , Urbaniak R.
• Języki publikacji: EN

Abstrakty

EN

This paper presents the results of tests conducted in the Chair of Thermal Engineering of Poznan University of Technology dedicated to determining the efficiency of low-power barrel fans, which are used in low-power boilers. Operation parameters of fans produced for industry were checked with respect to the requirements of Directive 2009/125/EC of the European Parliament. The tests were used to determine the efficiency of fans and to compare them against values determined according to the European Directive. The test results are presented on graphs as functions of air volume flow. Those characteristics comprise distributions of total pressure, electric power absorbed by the motor, and fan efficiency. The results indicate that there is a need to develop new guidelines. They should concern those efficiencies of low-power fans which are not covered by Directive 2009/125/EC of the European Parliament.

Słowa kluczowe

EN

fan; fan efficiency; pipeline transportation; low-power fan; low-power boiler

PL

wentylator; wydajność wentylatora; transport rurociągowy; wentylator małej mocy; kocioł małej mocy

• Wydawca: Institute of Heat Engineering, Warsaw University of Technology
• Czasopismo: Journal of Power Technologies
• Rocznik: 2017
• Tom: Vol. 97, nr 1
• Strony: 69--74
• Opis fizyczny: Bibliogr. 11 poz., tab., wykr.

Twórcy

autor

Bartoszewicz J.

• Chair of Thermal Engineering, Poznan University of Technology, St. Piotrowo 3, 60-965 Poznan, Poland

autor

Nygard A.

• Chair of Thermal Engineering, Poznan University of Technology, St. Piotrowo 3, 60-965 Poznan, Poland

autor

Urbaniak R.

• Chair of Thermal Engineering, Poznan University of Technology, St. Piotrowo 3, 60-965 Poznan, Poland

Bibliografia

• [1] R. Urbaniak, J. Bartoszewicz, R. Kłosowiak, et al., Main causes of nox emissions by low-power boilers., Polish Journal of Environmental Studies 24 (5) (2015) 2223–2230.
• [2] J. Bartoszewicz, R. Kłosowiak, L. Bogusławski, The analysis of the flow structure in a jet at variable geometry of the reverse chamber, International Journal of Heat and Mass Transfer 55 (11) (2012) 3239–3245.
• [3] Commission Regulation of the European Union No. 327/2011.
• [4] Polish standard No. PN-81/M-42367.
• [5] T. Fodemski, Pomiary cieplne [Thermal measurements], part I and II, WNT, Warsaw, 2006.
• [6] S. Fortuna, Wentylatory [Fans], The Publishing house of AGH, Krakow, 1999, in Polish.
• [7] Polish standard No. PN-M-43011.
• [8] H. Koczyk, Ogrzewnictwo praktyczne [Heating technology practice], SYSTHERM, Poznan, 2009, in Polish.
• [9] Polish standard No. PN-93/M-53950/01.
• [10] Polish standard No. PN-81/M-42366.
• [11] Polish standard No. PN-ISO 5221.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).