PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Rozdział mieszanin gazowych przy wykorzystaniu ciekłych membran na podłożu ceramicznym impregnowanym cieczą jonową

Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Gas mixture separation on ceramic membranes impregnated with ionic liquid
Języki publikacji
PL
Abstrakty
PL
W pracy przedstawiono wyniki badań separacji ditlenku węgla i azotu na ceramicznych membranach ciekłych impregnowanych cieczą jonową [Emim][Ac] ] (octan 1-etylo-3-metyloimidazolowy). Badania przeprowadzono dla membrany ceramicznej firmy Pervatech BV w temperaturach 20-60°C dla ciśnień 1- 7 bar. Ciecz jonową nanoszono metodą pokrywania oraz zanurzania. Stwierdzono, że otrzymane membrany SILMs charakteryzują się niewielkimi strumieniami masowymi oraz dużymi wartościami selektywności.
EN
The experimental results of carbon dioxide and nitrogen separation on ceramic membranes impregnated with ionic liquid [Emim][Ac] (1-ethyl-3-methylimidazolium acetate) are presented. Ceramic membranes made by Pervatech BV were investigated in 20-60°C and in the pressure range 1-7 bar. The ionic liquid was introduced into ceramic support by coating and soaking. It was found, that prepared SILMs are characterized by small mass fluxes and high selectivities.
Rocznik
Tom
Strony
55--67
Opis fizyczny
Bibliogr. 16 poz., rys., tab.
Twórcy
  • Instytut Inżynierii Chemicznej PAN, ul. Bałtycka 5, 44-100 Gliwice
  • Politechnika Opolska, Wydział Inżynierii Produkcji i Logistyki, ul. Gen. Sosnkowskiego 31, 45-272 Opole
  • Instytut Inżynierii Chemicznej PAN, ul. Bałtycka 5, 44-100 Gliwice
Bibliografia
  • [1] Budzianowski W.M., 2015. Single solvents, solvent blends, and advanced solvent systems in CO2 capture by absorption: a review, Int. J. Global Warming, Vol. 7, No. 2, 184-225.
  • [2] Bara J.E., 2016. Ionic liquids for post combustion CO2 capture, In: Absorption based post- combustion capture of carbon dioxide, Edited by Paul H.M. Feron, Woodhed Publishing, Duxford U.K..
  • [3] Luis P., Neves L.A., Afonso C.A.M., Coelhoso I.M., Crespo J.G., Garea A., Irabien A., 2009. Facilitated transport of CO2 and SO2 through supported ionic liquid membranes (SILMs), Desali- nation 245, 485–493.
  • [4] Albo J., Tsuru T., 2014. Thin Ionic Liquid Membranes Based on Inorganic Supports with Differ- ent Pore Sizes, Ind. Eng. Chem. Res. 53, 8045−8056.
  • [5] Zhang Y., Ji X,, Xie Y., Lu X., 2016. Screening of conventional ionic liquids for carbon dioxide capture and separation , Applied Energy 162, 1160-1170.
  • [6] Santos E., Albo J., Irabien A., 2014. Acetate based supported ionic liquid membranes (SILMs) for CO2 separation: Influence of the temperature, J. Membr. Sci. 452, 277– 283.
  • [7] Albo J., Yoshioka T., Tsuru T., 2014. Porous Al2O3/TiO2 tubes in combination with 1-ethyl-3- methylimidazolium acetate ionic liquid for CO2/N2 separation, Sep. Purif. Technol. 122, 440– 448.
  • [8] Sánchez Fuentes C.E., Guzmán-Lucero D., Torres-Rodriguez M.,. Likhanova, N.V., Navarrete Bolanos J., Olivares-Xometl, O., Lijanova, I.V., 2017. CO2/N2 separation using alumina support- ed membranes based on new functionalized ionic liquids. Separation and Purification Technology. 182, 59–68.
  • [9] Shiflett M.B., Yokozeki A., 2009. Phase behavior of carbon dioxide in ionic liquids: [emim][Acetate], [emim][Trifluoroacetate], and [emim][Acetate] [emim][Tri-fluoroacetate] mix- tures, J.Chem.Eng.Data 54, 108–114.
  • [10] Shiflett M.B., Drew D.W., Cantini R.A. Yokozeki A., 2010. Carbon Dioxide Capture Using Ionic Liquid 1-Butyl-3-methylimidazolium Acetate, Energy Fuels 24, 578-5789.
  • [11] Karousos D.S., Labropoulos A.I., Sapalidis A., Kanellopoulos N.K., Iliev B., Schubert T.J.S., Romanos G.E., 2017. Nanoporous ceramic supported ionic liquid membranes for CO2 and SO2 removal from flue gas, Chemical Engineering Journal 313, 777–790.
  • [12] Pian Ch., Shen J., Liu G., Jin W., 2016. Ceramic hollow fiber-supported PDMS membranes for oxygen enrichment from air, Asia-Pac. J. Chem. Eng. 11, 460-466, DOI:10.1002/APJ.1972.
  • [13] Rena X., Jia Y., Lua X., Shi T., Ma S., 2018. Preparation and characterization of PDMS-D2EHPA extraction gel membrane for metal ions extraction and stability enhancement. J.Membr. Sci. 559, 159–169.
  • [14] Sadrzadeh M., Shahidi K., Mohammadi T., 2010. Synthesis and gas permeation properties of a single layer PDMS membrane, Journal of Applied Polymer Science 117(1), 33–48.
  • [15] Bernard P., Drioli E., Golemme G., 2009. Membrane gas separation: A review/state of the art, Ind. Eng. Chem. Res., 48, 4638– 4663.
  • [16] Robeson L.M., 2008. The upper bound revisited, J. Membr. Sci. 320, 390–400.
Uwagi
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-f857c3c3-aeef-4c8d-8be1-5c6f91fcbce9
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.