Forming analysis of continuosly annealed, double reduced steel sheets

• Autorzy: Spišák Emil , Majerníková Janka , Mulidrán Peter , Kaščák Ľuboš , Slota Ján

Identyfikatory

DOI

10.12913/22998624/94967

• Języki publikacji: EN

Abstrakty

EN

The paper deals with the forming analysis of continuously annealed steel sheets double reduced. Six different metal sheet grades were evaluated in the paper, thickness was in the range from 0.15 to 0.175 mm. Described are the used methods and the results obtained by a uniaxial tensile test, biaxial test (bulge test) and a springback test.

Słowa kluczowe

EN

forming analysis; springback; packaging steel

PL

analiza formowania; opakowanie ze stali; sprężyna

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2018
• Tom: Vol. 12, no 3
• Strony: 168--172
• Opis fizyczny: Bibliogr. 14 poz., fig., tab.

Twórcy

autor

Spišák Emil

• Technical University of Košice, Faculty of Mechanical Engineering, Mäsiarska 74, 040 01 Košice, Slovakia

autor

Majerníková Janka

• Technical University of Košice, Faculty of Mechanical Engineering, Mäsiarska 74, 040 01 Košice, Slovakia

autor

Mulidrán Peter

• Technical University of Košice, Faculty of Mechanical Engineering, Mäsiarska 74, 040 01 Košice, Slovakia

autor

Kaščák Ľuboš

• Technical University of Košice, Faculty of Mechanical Engineering, Mäsiarska 74, 040 01 Košice, Slovakia

autor

Slota Ján

• Technical University of Košice, Faculty of Mechanical Engineering, Mäsiarska 74, 040 01 Košice, Slovakia

Bibliografia

• 1. Spišák, E., Slota, J., Majerníková, J.: Hodnotenie anizotropie tenkých obalových plechov. In: Visnik: Naukovo-mechničnij zbirnik. Kijev: Nacionaľnij transportnij univrsitet, 2006, p. 23-29.
• 2. Majerníková, J.: Medzné deformácie tenkých obalových plechov pri rôznych napäťovo-deformačných stavoch. Dizertačná práca, Košice, 2008.
• 3. Spišák, E. – Majerníková, J: Properties evaluation of progressive wrapping materials. In: Mechanical Engineering SI 2008: 12th International Conference: proceedings of papers. Bratislava STU, 2008. ISBN 978-80-227-2982-6. S. 1-8.
• 4. Spišák, E., Slota, J., Majerníková, J.: Analýza začiatku plastickej deformácie DR obalových plechov. In: Acta Mechanica Slovaca. roč. 10, č. 2b Pro-tech-ma (2006), s. 387-392. ISSN 1335-2393.
• 5. Spišák, E. – Majerníková, J.: Plastic deformation of tin coated steel sheet under different stress-strain states. In: Progressive technologies and materials. 3-B : Materials. Rzeszów : Oficyna Wydawnica Politechniki Rzeszowskiej, 2009. ISBN 978- 83- 7199-550-7. - P. 25-35.
• 6. Chongthairungruang, B; Uthaisangsuk, V. Springback prediction in sheet metal forming of high strength steels, Materials and Design 2013, 50, pp. 253-266. 10.1016/j.matdes.2013.02.060.
• 7. Lei, D; Xinyun, W; Junsong, J; Liangjun, X. Springback and hardness of aluminum alloy sheet part manufactured by warm forming processs using non-isothermal dies, Procedia Engineering 2017, 207, pp. 2388-2393. 10.1016/j.proeng.2017.10.1013.
• 8. Wagoner, R; H. Lim, H; Lee, M.G.. Advanced Issues in springback, International Journal of Plasticity 2013, 45, pp. 3–20. https://doi.org/10.1016/j. ijplas.2012.08.006.
• 9. Trzepiecinski, T; Lemu, H, G. Effect of Computational Parameters on Springback Prediction by Numerical Simulation, Metals 2017, 7, pp. 380. 10.3390/met7090380.
• 10. Mulidran, P; Spisak, E; Majernikova, J; Sleziak, T; Gres, M. Influence of forming method and process conditions on springback effect in the sheet metal forming simulation, International Journal of Engineering and Science (IJES) 2017, 6, pp. 62-67. 10.9790/1813-0612016267.
• 11. Banabic, D. Advanced anistropic yield criteria. In Sheet Metal Forming Processes, 1st edition; Springer Heidelberg Dordrecht, Berlin, Germany, 2010, pp. 76-87, ISBN 978-3-540-88112-4.
• 12. Jung, J, B; Jun, S; Lee, H,S; Kim, B,M; Lee, M,G; Kim, J,H. Anisotropic Hardening Behaviour and Springback of Advanced High-Strength Steels, Metals 2017, 7, pp. 480. 10.3390/met7110480.
• 13. Banu M, Takamura M, Hama T, Naidim O, Teodosiu C, Makinouchi A. Simulation of springback and wrinkling in stamping of a dual phase steel rail-shaped part, J Mater Process Technol 2006, pp. 173-178. 10.1016/j.jmatprotec.2005.11.023.
• 14. Slota, J; Spisak, E. Comparison of the forming-limit diafram (FLD) models for drawing quality (DQ) steel sheets, Metalurgija 44 2005, 4, pp. 249-253.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).