Prosthetic Elements Made of the Ti-13Zr-13Nb Alloy by Selective Laser Melting. First optimization of the process parameters

• Autorzy: Seramak T. , Zasińska K. , Zieliński A. , Andryskowski J. , Andryskowska-Ignaczak A. , Motyl M.

Identyfikatory

DOI

10.1515/adms-2017-0016

• Języki publikacji: EN

Abstrakty

EN

The fabrication of the prosthetic foundations and bridges from the Ti-13Zr-13Nb alloy is described. The process was started from CAD/CAM design of 3D models of the foundations based on scanning of patient’s mouth. Next, 3D models were transformed into *.stl files for the manufacturing stage and then the manufacturing process by means of the selective laser melting with the SLM Realizer 100 equipment was made. The intrinsic structure of the obtained parts was investigated with X-ray microtomography. The observed imperfections in the foundation's internal structure can be eliminated by a proper setting of the laser melting process. The thermal stresses, which resulted of the temperature change during melting and caused the bending of titanium made bridges, were eliminated at a design stage.

Słowa kluczowe

EN

foundations; bridges; rapid prototyping; selective laser melting; titanium alloys

PL

mosty; szybkie prototypowanie; SLM Realizer 100; stop tytanu; topienie laserowe

• Wydawca: Politechnika Gdańska
• Czasopismo: Advances in Materials Science
• Rocznik: 2017
• Tom: Vol. 17, nr 3(53)
• Strony: 54--61
• Opis fizyczny: Bibliogr. 27 poz., rys.

Twórcy

autor

Seramak T.

• Gdansk University of Technology, Faculty of Mechanical Engineering, Department of Materials and Welding Engineering, 11/12 Narutowicza, 80-233 Gdańsk, Poland

autor

Zasińska K.

• Gdansk University of Technology, Faculty of Mechanical Engineering, Department of Machine Design and Motor Vehicles, 11/12 Narutowicza, 80-233 Gdańsk, Poland
• [e-mail]

autor

Zieliński A.

• Gdansk University of Technology, Faculty of Mechanical Engineering, Department of Materials and Welding Engineering, 11/12 Narutowicza, 80-233 Gdańsk, Poland

autor

Andryskowski J.

• Prosthetic Laboratory Jerzy Andryskowski, Obrońców Wybrzeża 32, 80-317 Gdańsk, Poland

autor

Andryskowska-Ignaczak A.

• Prosthetic Laboratory Jerzy Andryskowski, Obrońców Wybrzeża 32, 80-317 Gdańsk, Poland

autor

Motyl M.

• Prosthetic Laboratory Jerzy Andryskowski, Obrońców Wybrzeża 32, 80-317 Gdańsk, Poland

Bibliografia

• 1. Zhang L.C., Attar H.: Selective laser melting of titanium alloys and titanium matrix composites for biomedical applications: A review. Advanced Engineering Materials 18 (2016) 463-465.
• 2. Vrancken B., Thijs L., Kruth J.-P., Van Humbeeck J.: Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting. Acta Materialia 68 (2014) 150–158.
• 3. Liu Y.J., Li X.P., Zhang L.C., Sercombe T.B.: Processing and properties of topologically optimised biomedical Ti–24Nb–4Zr–8Sn scaffolds manufactured by selective laser melting. Materials Science and Engineering A 642 (2015) 268–278.
• 4. Chlebus E., Kuźnicka B., Dziedzic R., Kurzynowski T.: Titanium alloyed with rhenium by selective laser melting. Materials Science and Engineering A 620 (2015) 155–163.
• 5. Zhou Y., Wen S.F., Song B. et al.: A novel titanium alloy manufactured by selective laser melting: Microstructure, high-temperature oxidation resistance. Materials and Design 89 (2016) 1199–1204.
• 6. Fischer M., Joguet D., Robin G. et al.: In situ elaboration of a binary Ti–26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders. Materials Science and Engineering C 62 (2016) 852–859.
• 7. Yan L., Yuan Y., Ouyang L. et al.: Improved mechanical properties of the new Ti-15Ta-xZr alloys fabricated by selective laser melting for biomedical application. Journal of Alloys and Compounds 688 (2016) 156-162.
• 8. Ishimoto T., Hagihara K., Hisamoto K. et al.: Crystallographic texture control of beta-type Ti–15Mo–5Zr–3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young's modulus. Scripta Materialia 132 (2017) 34–38.
• 9. Wei K., Wang Z., Zeng X.: Preliminary investigation on selective laser melting of Ti-5Al-2.5Sn C-Ti alloy: From single tracks to bulk 3D components. Journal of Materials Processing Technology 244 (2017) 73–85.
• 10. Maji P.K., Banerjee A.J., Banerjee P.S., Karmakar S.: Additive manufacturing in prosthesis development – a case study. Rapid Prototyping Journal 20 (2014) 480-489.
• 11. Joguet D., Costil S., Liao H., Danlos Y.: Porosity content control of CoCrMo and titanium parts by Taguchi method applied to selective laser melting process parameter. Rapid Prototyping Journal 22 (2016) 20-30.
• 12. Chen L.Y., Huang J.C., Lin C.H. et al.: Anisotropic response of Ti-6Al-4V alloy fabricated by 3D printing selective laser melting. Materials Science and Engineering A 682 (2017) 389–395.
• 13. Fantini M., De Crescenzio F., Ciocca L., Persiani F.: Additive manufacturing to assist prosthetically guided bone regeneration of atrophic maxillary arches. Rapid Prototyping Journal 24 (2015) 705-715.
• 14. Lapcevic A.R., Jevremovic D.P., Puskar T.M. et al.: Comparative analysis of structure and hardness of cast and direct metal laser sintering produced Co-Cr alloys used for dental devices", Rapid Prototyping Journal 22 (2016) 144-151.
• 15. Conradie P.J.T., Dimitrov D., Oosthuizen G.A.et al.: Comparative assessment of process combination for Ti6Al4V components. Rapid Prototyping Journal 23 (2017) 624-632.
• 16. Hassanin H., Essa K., Qiu C. et al.: Net-shape manufacturing using hybrid selective laser melting/hot isostatic pressing. Rapid Prototyping Journal 23 (2017), iss. 4, in press.
• 17. Zhang Q., Liang Z.-L., Cao M. et al.: Microstructure and mechanical properties of Ti6Al4V alloy prepared by selective laser melting combined with precision forging. Trans. Nonferrous Met. Soc. China 27 (2017) 1036−1042.
• 18. Khorasani A.M., Gibson I., Goldberg M., Littlefair G.: On the role of different annealing heat treatments on mechanical properties and microstructure of selective laser melted and conventional wrought Ti-6Al-4V. Rapid Prototyping Journal 23 (2017) 295-304.
• 19. Santos E., Osakada K., Shiomi M. et al.: Fabrication of titanium dental implants by selective laser melting. Proc. SPIE 5662, 5th Intl. Symp. Laser Precision Microfabr. 2004.
• 20. Gao B., Wu J., Zhao X., Tan H.: Fabricating titanium denture base plate by laser rapid forming. Rapid Prototyping Journal 15 (2009) 133-136.
• 21. Yang Y., Lu J.B., Luo Z.Y., Wang D.: Accuracy and density optimization in directly fabricating customized orthodontic production by selective laser melting. Rapid Prototyping Journal 18 (2012) 482-489.
• 22. Kanazawa M., Iwaki M., Minakuchi S., Nomura N.: Fabrication of titanium alloy frameworks for complete dentures by selective laser melting. Journal of Prosthehtic Dentistry 112 (2014) 1441-1447.
• 23. Chen S.Y., Huang J.C., Pan C.T. et al.: Microstructure and mechanical properties of open-cell porous Ti-6Al-4V fabricated by selective laser melting. Journal of Alloys and Compounds 713 (2017) 248-254.
• 24. Tolochko N.K., Arshinov M.K., Gusarov A.V. et al.: Mechanisms of selective laser sintering and heat transfer in Ti powder. Rapid Prototyping Journal 9 (2003) 314-326.
• 25. Marcu T., Menapace C., Girardini L. et al.: Selective laser melting of Ti6Al7Nb with hydroxyapatite addition. Rapid Prototyping Journal 20 (2014) 301-310.
• 26. Li X.P., Van Humbeeck J., Kruth J.P., Selective laser melting of weak-textured commercially pure titanium with high strength and ductility: A study from laser power perspective. Materials and Design 116 (2017) 352–358.
• 27. Wysocki B., Maja P., Krawczynska A. et al.: Microstructure and mechanical properties investigation of CP titanium processed by selective laser melting (SLM). Journal of Materials Processing Technology 241 (2017) 13–23.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).