Structure equation as novel strategy for optimum reflector design

• Autorzy: Ou Chung-Jen

Identyfikatory

DOI

10.37190/oa200108

• Języki publikacji: EN

Abstrakty

EN

The optimal use of energy resources is the central dogma for green technology and bio-optics. Reflectors provide a simple and fundamental structure for energy transport from a light emitting diode (LED) chip, and an appropriately designed reflector can reduce the fabrication cost of secondary optics for the LED. This paper demonstrates the role of three proposed reflector geometric factors in the two performance metrics – uniformity and collected energy (power), for designing LED reflectors. Through canonical factor analysis, a linear structure equation for LED reflector is suggested, and the methodology for designing the optimal shape is discussed. In addition, a generalized factor and a synthesis response are proposed for a more comprehensive investigation of optical performance. Results indicate a key parameter for balancing the optical performance, and the effects of various parameters and the trade-offs are revealed.

Słowa kluczowe

EN

illumination design; light-emitting diodes; structure equation

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Optica Applicata
• Rocznik: 2020
• Tom: Vol. 50, nr 1
• Strony: 95--110
• Opis fizyczny: Bibliogr. 20 poz., rys., tab.

Twórcy

autor

Ou Chung-Jen

• Hsiuping Solar Observatory and Photo-Chemical Lab., Department of Energy and Materials Technology, Hsiuping University of Science and Technology, No. 11, Gongye Rd., 40128 Dali, Taichung, Taiwan ROC

Bibliografia

• [1] WANG S., WANG K., CHEN F., LIU S., Design of primary optics for LED chip array in road lighting application, Optics Express 19(S4), 2011, pp. A716–A724, DOI:10.1364/OE.19.00A716.
• [2] http://www.lighting.philips.co.uk (accessed 2019).
• [3] GORDON J.M., RABL A., Reflectors for uniform far-field irradiance: fundamental limits and example of an axisymmetric solution, Applied Optics 37(1), 1998, pp. 44–47, DOI:10.1364/AO.37.000044.
• [4] BÄUERLE A., SCHNITZLER C., WESTER R., KIRSTEN M., SCHLÜTER H., TEWES M., LASCHEFSKI H., LOOSEN P., Optical system design for a reflector-based LED food lighting module, Proceedings of SPIE 8123, 2011, article 812306, DOI:10.1117/12.893688.
• [5] JAFRANCESCO D., MERCATELLI L., FONTANI D., SANSONI P., Optical CAD utilization for the design and testing of a LED street lamp, Materials 10(9), 2017, article 985, DOI:10.3390/ma10090985.
• [6] https://www.lumileds.com/uploads/227/AB20-5-PDF (accessed 2019).
• [7] CHEN E., YU F., Design of LED-based reflector-array module for specific illuminance distribution, Optics Communications 289, 2013, pp. 19–27, DOI:10.1016/j.optcom.2012.09.082.
• [8] TRAN N.T., SHI F.G., LED package design for high optical efficiency and low viewing angle, [In] 2007 International Microsystems, Packaging, Assembly and Circuits Technology, 2007, pp. 10–13, DOI:10.1109/IMPACT.2007.4433557.
• [9] OU C.R., HO R., KUNG C.Y., Energy distribution issues for the designing of the LED reflector, [In] Proceedings of 1st International Conference on Display LED (ICDL 2007), Seoul, Korea, pp. 103–105.
• [10] MA M., MONT F.W., YAN X., CHO J., SCHUBERT E.F., KIM G.B., SONE C., Effects of the refractive index of the encapsulant on the light-extraction efficiency of light-emitting diodes, Optics Express 19(S5), 2011, pp. A1135–A1140, DOI:10.1364/OE.19.0A1135.
• [11] HUANG Y., HUANG Z., ZHONG Z., YANG X., HONG Q., WANG H., HUANG S., GAO N., CHEN X., CAI D., KANG J., Highly transparent light emitting diodes on graphene encapsulated Cu nanowires network, Scientific Reports 8, 2018, article 13721, DOI:10.1038/s41598-018-31903-7.
• [12] MONTGOMERY D., Design and Analysis of Experiments, 5th Ed., Wiley, 2001.
• [13] http://www.statsoft.com (accessed 2019).
• [14] JOLLIFFE T., Principal Component Analysis, Springer-Verlag, 1986, p. 487.
• [15] HAIR J.F., Jr., ANDERSON R.E., TATHAM R.L., BLACK W.C., Multivariate Data Analysis, 5th Ed., PrenticeHall, 1998, Chap. 8.
• [16] OU C.-J., LIN C.-H., YOUNG S.-L., Analysis of light emitting diode reflector by factor analysis, [In] Proceedings of 19th International Display Workshops in conjunction with Asia Display 2012(AD/IDW 2012), Kyoto, Japan, pp. 1538–1539.
• [17] Light-Tool 8.3 Illumination Module User’s Guide, Optical Research Associates, 2015, p. 141.
• [18] http://www.ansys.com (accessed 2019).
• [19] OU C.-J., HUANG Z.-W., HSU Y.-J., LAN R.-Y., OU C.-Y., Structural equation approach for the designing of LED cup reflector and the future prospect, [In] Proceedings of 23th International Display Workshops in conjunction with Asia Display 2016 (AD/IDW 2016), Fukuoka, Japan, pp. 398–399.
• [20] OU C.-J., Fresnel-like prism structure generating algorithm on a curved surface with iterative andnon-iterative forms, Journal of the Optical Society of America A 29(7), 2012, pp. 1427–1435, DOI:10.1364/JOSAA.29.001427.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).