Open-switch fault diagnosis system based on one current sensing for a matrix converter using neural network

• Autorzy: Iraji Farzad , Nateghi Alireza , Farjah Ebrahim
• Języki publikacji: EN

Abstrakty

EN

It is difficult to diagnose a three-phase matrix converter using a mathematical model, because a matrix converter consists of nine switches with various nonlinear factors. Since a neural network does not require any mathematical system model, it is a suitable technique for fault classification in matrix converters. In this manuscript, a fault diagnostic system for three-phase to three-phase matrix converters using a neural network is proposed to detect a fault and identify its location. The proposed diagnostic system can detect faults using just one phase current waveform which is very efficient in terms of cost of sensors and system complexity. This method was evaluated using simulation and experimental data sets in two scenarios. The results confirm that in different normal and abnormal situations the system achieves performance levels in excess of 98%.

Słowa kluczowe

EN

fault diagnosis; matrix converter; neural network

PL

diagnostyka uszkodzeń; konwerter matrycowy; sieć neuronowa

• Wydawca: Institute of Heat Engineering, Warsaw University of Technology
• Czasopismo: Journal of Power Technologies
• Rocznik: 2019
• Tom: Vol. 99, nr 4
• Strony: 289--294
• Opis fizyczny: Bibliogr. 30 poz., rys., tab., wykr.

Twórcy

autor

Iraji Farzad

• Shiraz University, Shiraz, Iran

autor

Nateghi Alireza

• Shahid Beheshti University, Tehran, Iran

autor

Farjah Ebrahim

• Shiraz University, Shiraz, Iran

Bibliografia

• [1] Bin Wu and Mehdi Narimani. High-power converters and AC drives, volume 59. John Wiley & Sons, 2017.
• [2] Sergio Vazquez, Jose Rodriguez, Marco Rivera, Leopoldo G Franquelo, and Margarita Norambuena. Model predictive control for power converters and drives: Advances and trends. IEEE Transactions on Industrial Electronics, 64(2):935-947, 2016.
• [3] Eiji Yamamoto, Hidenori Hara, Takahiro Uchino, Masahiro Kawaji, Tsuneo Joe Kume, Jun Koo Kang, and Hans-Peter Krug. Development of MCs and its Applications in Industry [Industry Forum]. IEEE Industrial Electronics Magazine, 5(1):4-12, mar 2011.
• [4] M. Aten, G. Towers, C. Whitley, P. Wheeler, J. Clare, and K. Bradley. Reliability comparison of matrix and other converter topologies. IEEE Transactions on Aerospace and Electronic Systems, 42(3):867-875, jul 2006.
• [5] Ui-Min Choi, Frede Blaabjerg, and Kyo-Beum Lee. Study and Handling Methods of Power IGBT Module Failures in Power Electronic Converter Systems. IEEE Transactions on Power Electronics, 30(5):2517-2533, may 2015.
• [6] Hyunseok Oh, Bongtae Han, Patrick McCluskey, Changwoon Han, and Byeng D. Youn. Physics-of-Failure Condition Monitoring, and Prognostics of Insulated Gate Bipolar Transistor Modules: A Review. IEEE Transactions on Power Electronics, 30(5):2413-2426, may 2015.
• [7] Wenping Zhang, Dehong Xu, Prasad N. Enjeti, Haijin Li, Joshua T. Hawke, and Harish S. Krishnamoorthy. Survey on Fault-Tolerant Techniques for Power Electronic Converters. IEEE Transactions on Power Electronics, 29(12):6319-6331, dec 2014.
• [8] Yao Sun,Wenjing Xiong, Mei Su, Xing Li, Hanbing Dan, and Jian Yang. Topology and modulation for a new multilevel diode-clamped matrixconverter. IEEE Transactions on Power Electronics, 29(12):6352-6360, 2014.
• [9] Johann W Kolar, Frank Schafmeister, Simon D Round, and Hans Ertl. Novel three-phase AC-AC sparse matrix converters. IEEE transactions on power electronics, 22(5):1649-1661, 2007.
• [10] L. Huber and D. Borojevic. Space vector modulated three-phase to three-phase matrix converter with input power factor correction. IEEE Transactions on Industry Applications, 31(6):1234-1246, 1995.
• [11] D. Casadei, G. Serra, A. Tani, and L. Zarri. Matrix converter modulation strategies: a new general approach based on space-vector representation of the switch state. IEEE Transactions on Industrial Electronics, 49(2):370-381, apr 2002.
• [12] Yao Sun,Wenjing Xiong, Mei Su, Xing Li, Hanbing Dan, and Jian Yang. Carrier-Based Modulation Strategies for Multimodular Matrix Converters. IEEE Transactions on Industrial Electronics, 63(3):1350-1361, mar 2016.
• [13] Yao Sun,Wenjing Xiong, Mei Su, Hanbing Dan, Xing Li, and Jian Yang. Modulation Strategies Based on Mathematical Construction Method for Multimodular Matrix Converter. IEEE Transactions on Power Electronics, 31(8):5423-5434, aug 2016.
• [14] Huai Wang, Marco Liserre, Frede Blaabjerg, Peter de Place Rimmen, John B. Jacobsen, Thorkild Kvisgaard, and Jorn Landkildehus. Transitioning to Physics-of-Failure as a Reliability Driver in Power Electronics. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2(1):97-114, mar 2014.
• [15] Sangshin Kwak. Fault-Tolerant Structure and Modulation Strategies With Fault Detection Method for Matrix Converters. IEEE Transactions on Power Electronics, 25(5):1201-1210, may 2010.
• [16] Sudarat Khwan-on, Liliana de Lillo, Lee Empringham, and Pat Wheeler. Fault-Tolerant Matrix Converter Motor Drives With Fault Detection of Open Switch Faults. IEEE Transactions on Industrial Electronics, 59(1):257-268, jan 2012.
• [17] Sangshin Kwak and Hamid A. Toliyat. Fault-Tolerant Topologies and Switching Function Algorithms for Three-Phase Matrix Converter based AC Motor Drives Against Open and Short Phase Failures. In 2007 IEEE International Electric Machines & Drives Conference. IEEE, may 2007.
• [18] Sangshin Kwak. Four-Leg-Based Fault-Tolerant Matrix Converter Schemes Based on Switching Function and Space Vector Methods. IEEE Transactions on Industrial Electronics, 59(1):235-243, jan 2012.
• [19] Edorta Ibarra, Jon Andreu, Inigo Kortabarria, Enekoitz Ormaetxea, and Eider Robles. A fault tolerant space vector modulation strategy for matrix converters. In 2009 35th Annual Conference of IEEE Industrial Electronics. IEEE, nov 2009.
• [20] Panagiotis G. Potamianos, Epaminondas D. Mitronikas, and Athanasios N. Safacas. Open-Circuit Fault Diagnosis for Matrix Converter Drives and Remedial Operation Using Carrier-Based Modulation Methods. IEEE Transactions on Industrial Electronics, 61(1):531-545, jan 2014.
• [21] Steven X Ding. Model-based fault diagnosis techniques: design schemes, algorithms, and tools. Springer Science & Business Media, 2008.
• [22] S.M.A. Cruz, M. Ferreira, and A.J.M. Cardoso. Output error voltages - a first method to detect and locate faults in matrix converters. In 2008 34th Annual Conference of IEEE Industrial Electronics. IEEE, nov 2008.
• [23] Sérgio M. A. Cruz, Marco Ferreira, André M. S. Mendes, and António J. Marques Cardoso. Analysis and Diagnosis of Open-Circuit Faults in Matrix Converters. IEEE Transactions on Industrial Electronics, 58(5):1648-1661, may 2011.
• [24] Khiem Nguyen-Duy, Tian-Hua Liu, Der-Fa Chen, and John Y. Hung. Improvement of Matrix Converter Drive Reliability by Online Fault Detection and a Fault-Tolerant Switching Strategy. IEEE Transactions on Industrial Electronics, 59(1):244-256, jan 2012.
• [25] Sérgio M. A. Cruz, André M. S. Mendes, and António J. Marques Cardoso. A New Fault Diagnosis Method and a Fault-Tolerant Switching Strategy for Matrix Converters Operating With Optimum Alesina-Venturini Modulation. IEEE Transactions on Industrial Electronics, 59(1):269-280, jan 2012.
• [26] Peter Vas. Artificial-intelligence-based electrical machines and drives: application of fuzzy, neural, fuzzy-neural, and genetic-algorithm-based techniques, volume 45. Oxford university press, 1999.
• [27] F. Fiippetti and P. Vas. Recent developments of induction motor drives fault diagnosis using AI techniques. In IECON 98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.98CH36200). IEEE.
• [28] S. Hayashi, T. Asakura, and Sheng Zhang. Study of machine fault diagnosis system using neural networks. In Proceedings of the 2002 International Joint Conference on Neural Networks. IJCNN02 (Cat. No.02CH37290). IEEE.
• [29] Sheng ZHANG, Toshiyuki ASAKURA, Xiaoli XU, and Baojie XU. Fault Diagnosis System for Rotary Machine Based on Fuzzy Neural Networks. JSME International Journal Series C, 46(3):1035-1041, 2003.
• [30] A. Bernieri, M. DApuzzo, L. Sansone, and M. Savastano. A neural network approach for identification and fault diagnosis on dynamic systems. IEEE Transactions on Instrumentation and Measurement, 43(6):867-873, 1994.