Issues involved in using the direct method for magnetic field strength measurement of electrical steel sheets – review

• Autorzy: Gaworska-Koniarek D. , Bajorek J. , Wilczyński W.

Identyfikatory

DOI

10.5604/01.3001.0009.4420

Warianty tytułu

PL

Problemy pomiaru natężenia pola magnetycznego blach elektrotechnicznych metodą bezpośrednią – przegląd

• Języki publikacji: EN

Abstrakty

EN

The paper presents, based on a review of relevant literature, the existing problems of magnetic field strength measurements of electrical steel sheets by means of the indirect and direct methods. It also describes some attempts to solve these problems. The magnetic field strength sensors most widely used for testing electrical steel sheets are also discussed.

PL

W artykule, na podstawie dokonanego przeglądu literatury, przedstawiono istniejące problemy pomiaru natężenia pola magnetycznego metodą pośrednią i bezpośrednią w blachach elektrotech-nicznych oraz próby ich rozwiązania. Opisano czujniki składowej natężenia pola magnetycznego stosowane najczęściej do pomiaru natężenia pola magnetycznego w blachach elektrotechnicznych.

Słowa kluczowe

EN

magnetic field strength measurements; magnetic field sensor; magnetic field measurement; direct method

PL

pomiar natężenia pola magnetycznego; czujniki pola magnetycznego; metoda bezpośrednia

• Wydawca: Sieć Badawcza Łukasiewicz - Instytut Elektrotechniki
• Czasopismo: Prace Instytutu Elektrotechniki
• Rocznik: 2016
• Tom: Z. 274
• Strony: 71--82
• Opis fizyczny: Bibliogr. 38 poz., wz.

Twórcy

autor

Gaworska-Koniarek D.

• Electrotechnical Institute, Division of Electrotechnology and Materials Science, ul. M. Skłodowskiej-Curie 55/61, 50-369 Wrocław

autor

Bajorek J.

• R&J Measurement Electronic Instruments and Computerized Systems, ul. Lipowa 48, 55-093 Borowa

autor

Wilczyński W.

• Electrotechnical Institute, ul. M. Pożaryskiego 28, 04-703 Warszawa

Bibliografia

• 1. Abdallh A., Dupre L.: A Rogowski-Chattock coil for local magnetic field measurements: sources of error, Meas. Sci. Technol., vol. 21, pp. 107003 – 107008, 2010.
• 2. Abdallh A., Dupre L.: Local magnetic measurements in magnetic circuits with highly non-uniform electromagnetic fields, Meas. Sci. Technol., vol. 21, pp. 045109–045119, 2010.
• 3. Alatawneh N., Pillay P.: Calibration of the Tangential Coil Sensor for the Measurements of Core Losses in Electrical Machine Laminations, IEEE Transaction on Energy Conversion, vol. 31, no. 2, pp. 413–423, 2016.
• 4. Antonelli E., Cardelli E., Faba A.: Epstein frame: how and when it can be really representative about the magnetic behavior of laminated magnetic steels, IEEE Trans. Magn., vol. 41, no. 5, pp. 1516–1519, 2005.
• 5. Bajorek J.: The assessment of the method error of tangential component measurement of magnetic field strength on the surface of electrical steel sheets, Instytut Metrologii Elektrycznej Politechniki Wrocławskiej, Wrocław, 1980 (in Polish).
• 6. Chattock A. P.: On a magnetic potentiometer,” Philos. Mag. Ser. 5, vol. 24, no. 146, pp. 94–96, 1887.
• 7. Lenz J. and Edelstein A. S.: Magnetic sensors and their applications, IEEE Sens. J., vol. 6, no. 3, pp. 631–649, 2006.
• 8. Lobue M., Sasso C., Basso V.: Fiorillo F., Bertotti G., Power losses and magnetization process in Fe-Si non-oriented steels under tensile and compressive stress, J. Magn. Magn. Mater. 215 - 216, 124-126, 2000.
• 9. Loisos G., Moses A.J.: Effect of mechanical and Nd:YAG laser cutting on magnetic flux distribution near the cut edge of non-oriented steels, Journal of materials processing technology, vol. 161, no. 1-2, pp 151-155, 2003.
• 10. Magnetic materials – Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame, IEC 60404-2:1996+AMD1:2008.
• 11. Magnetic materials – Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester, IEC 60404-3:1992+A1:2002+A2:2009.
• 12. Marketos P., Zurek S., Moses A. J.: A Method for Defining the Mean Path Length of the Epstein Frame, IEEE Trans. Instrum. Meas., vol. 43, no. 6, pp. 2755–2757, 2007.
• 13. Marketos P., Zurek S., Moses A. J.: Calculation of the mean path length of the Epstein frame under non-sinusoidal excitations using the double Epstein method, J. Magn. Magn. Mater., vol. 320, no. 20, pp. 2542–2545, Oct. 2008.
• 14. Miyagi D., Otome D., Nakano M., Takahashi N.: Measurement of magnetic properties of nonoriented electrical steel sheet at liquid nitrogen temperature using Single Sheet Tester, IEEE Trans. Magn., vol. 46, no. 2, pp. 314–317, Feb. 2010.
• 15. Miyagi D., Yamazaki T., Otome D., Nakano M., Takahashi N.: Development of measurement system of magnetic properties at high flux density using novel Single-Sheet Tester, vol. 45, no. 10, pp. 3889–3892, 2009
• 16. Nakata T., Ishihara Y., Nakaji M., Todaka T.: Comparison between the H-coil method and the magnetizing current method for the single sheet tester, J. Magn. Magn. Mater., vol. 215, pp. 607–610, 2000.
• 17. Nakata T., Kawase Y., Nakano M., and Miuira M.: Analysis and Improvement of Measuring Method of Magnetic Fields in Single Sheet Testers, TJMJ-1, no. 7, pp. 873–874, 1986.
• 18. Nakata T., Takahashi N., Kawase Y., Nakano M., Miura M., Sievert J. D.: Numerical Analysis and Experimental Study of the error of Magnetic Field Strength Measurements with Single Sheet Testers, IEEE Trans. Magn., vol. MAG-22, no. 5, pp. 400–402, 1986.
• 19. Nakata T., Kawase Y., Nakano M.: Improvement of measuring accuracy of magnetic field strength, IEEE Trans. Magn., vol. 23, no. 5, pp. 2596–2598, 1987.
• 20. Nakazaki O., Todaka T., Enokizono M.: Iron loss evaluation in stator cores of rotating machines during manufacturing process, Przegląd Elektrotechniczny (Electrical Review, 85 no. 1, pp. 74-78, 2009.
• 21. Oszwaldowski M. , Berus T.: High temperature Hall sensors, Sensors Actuators, A Phys., vol. 136, no. 1, pp. 234–237, 2007.
• 22. Oszwaldowski M.: Hall sensors based on heavily doped n-InSb thin films, Sensors Actuators, A Phys., vol. 68, no. 1–3 pt 2, pp. 234–237, 1998.
• 23. Perevertov O.: Increase of precision of Surface magnetic field measurements by magnetic shielding, Meas. Sci. Technol., vol. 20, no. 5, pp. 055107-055113, 2009.
• 24. Perevertov O.: Measurement of the surface field on open magnetic samples by the extrapolation method, Rev. Sci. Instrum., vol. 76, no. 10, pp. 104701-104707, 2005.
• 25. Pfützner H., Schonhuber P.: On the problem of the field detection for Single Sheet Testers, IEEE Trans. Magn., vol. 27, no. 2, pp. 778–785, 1991.
• 26. Regtien P. P. L.: Sensors for mechatronics, Chapter 6:Inductive and Magnetic Sensors. pp. 130-134, Elsevier 2012
• 27. Samimi M. H., Mahari A.: Farahnakian M. A., Mohseni H., The Rogowski coil principles and applications: a review, IEEE Sens. J., vol. 15, no. 2, pp. 651–658, 2015.
• 28. Sghaier H., Bouzaïene L., Sfaxi L.: Maaref H.: A novel AlGaAs/GaAs heterojunction-based Hall sensor designed for low magnetic field measurements, Phys. Status Solidi Basic Res., vol. 241, no. 6, pp. 1306–1311, 2004.
• 29. Sievert J. D.: Determination of AC Magnetic Power Loss of Electrical Steel Sheet: Present Status and Trends,” IEEE Trans. Magn., vol. MAG-20, no. 5, pp. 1702–1707, 1984.
• 30. Sievert J.: The measurement of magnetic properties of electrical sheet steel – survey on methods and situation of standards, J. Magn. Magn. Mater., vol. 215–216, pp. 647–651, Jun. 2000.
• 31. Stupakov O.: Controllable Magnetic Hysteresis Measurement of Electrical Steels in a Single-Yoke Open Configuration, IEEE Trans. Magn., vol. 48, no. 12, pp. 4718–4726, 2012.
• 32. Stupakov O.: Investigation of applicability of extrapolation method for sample field determination in single-yoke measuring setup, J. Magn. Magn. Mater. 307, 279-287, 2006.
• 33. Tumański S.: A multi-coil sensor for tangential magnetic field investigations, J. Magn. Magn. Mater., vol. 242–245, pp. 1153–1156, 2002.
• 34. Tumański S.: Handbook of magnetic field measurements, Ch. 4 – Magnetic sensors, CRC Press 2011.
• 35. Tumański S:, Induction coil sensor – a review, Meas. Sci. Technol. 18, R31-R46, 2007.
• 36. Tumański S.: Modern Magnetic field sensors – a review, Przegląd Elektrotechniczny, vol. 89, no. 10, pp. 1-11, 2013.
• 37. Wilczyński W.: The influence of technology on magnetic properties of electric machine cores, Prace Instytutu Elektrotechniki, Warszawa, 2003 (in Polish),
• 38. Wilczyński W.: Influence of magnetic circuit production for their magnetic properties, Journal of Materials Science, vol. 38, no. 24, pp. 4905-4910, 2003.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.