PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Modification of aluminum with AlTi5C0,1

Identyfikatory
Warianty tytułu
PL
Modyfikacja aluminium dodatkiem AlTi5C0,1
Języki publikacji
EN
Abstrakty
EN
In the paper the modification of aluminium with the use of AlTi5C0,1 primary alloys of varying concentrations from 0,1% to 0,4% wt has been presented. The modified metal was melted in a chember resistance furnace inside graphite-chamotte crucibles and the effects of modification were evaluated in the investigations of macro- and microstructure and by scanning microscopy (EDX-analysis). The results of these examinations showed the advantageous grain refinement of aluminium and the change of its pillar grains into the structure with equiaxed grains. As it was revealed titanium and carbon were concentrated in the heterogeneous crystallization centra where the particles defined as TiC/Al3Ti were locakized. The trace amounts of the mentioned elements: titanium and carbon tn the metal matrix confirm that the effect of grain refinement is due to the modifying influence of titanium and carbon on aluminium durning its modification process.
PL
W pracy przedstawiono wyniki badań nad modyfikacją technicznego aluminium dodatkiem AlTi5C0,1 w ilości 0,1-0,4%. Badania wykazały, że zadowalający efekt rozdrobnienia ziarn aluminium zapewnia dodatek AlTi5C0,1 w ilości 0,2-0,3% przy którym średnia średnica ziarna zmniejsza się do 0,2 mm. Metodą energodyspersyjnej analizy rentgenowskiej stwierdzono, że heterogeniczne zarodkowanie w modyfikowanym aluminium wywołują cząstki faz TiC oraz Al3Ti.
Słowa kluczowe
Rocznik
Strony
189--196
Opis fizyczny
Bibliogr. 6 poz., rys.
Twórcy
  • University of Zielona Gora, ul. Podgorna 50, 65-246 Zielona Gora
  • University of Zielona Gora, ul. Podgorna 50, 65-246 Zielona Gora
Bibliografia
  • [1] I.A. Marcantonio, L.E. Mondolfo: Met. Trans. 1971, No 2, p. 465.
  • [2] M.M. Guzowski, G.K. Sigworth, D.A. Sentner: Met. Trans. 1987, No 18, p. 603.
  • [3] L. Backerund: Jerenkont. Ann. 1971, p. 422.
  • [4] M. Kremer: Doktor-Ingenieur Dissertation. TU Berlin 1995.
  • [5] W. Reif: Metall. 1988, No 3, p. 120.
  • [6] H. Blumenauer: Werkstoffprufung. DVG, Leipzig, Stuttgart 1994.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-f69740a3-2c50-427c-ac02-da9d1d8dbd33
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.