PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Hairiness Values of the Polyester/Viscose Ring - Spun Yarn Blends

Identyfikatory
Warianty tytułu
PL
Włochatość wybranych mieszanek rotorowych przędz poliestrowo - wiskozowych
Języki publikacji
EN
Abstrakty
EN
In this work, 0.133 - 0.166 tex and 38 mm of fiber length of polyester and viscose rovings of 591 tex (αtex 8) were blended variously (polyester/viscose 35/65%; polyester/viscose 50/50%; polyester/viscose 65/35%; polyester 100% and viscose 100%) and the yarns were produced at spindle speed of 18000 rev/min with 48 mm of ring diameter and C type of traveller 50 mg (No.1/0) in ring frames. Later, the resulted 20 tex yarns were examined by measuring its tenacity, elongation, irregularity and hairiness. The aim of this study is to investigate the hairiness of ring-spun polyester/viscose blends, which are commonly used in the textile industry, by using three different test methods. The pilling values of these produced samples were also determined. The outcomes have been assessed according to the blend ratios and fiber locations which were scanned on the scanning electron microscope; the observations were concluded both on the hairiness and pilling values depending on the blend proportions. As a result, within the produced yarns the worse hairiness was obtained on the viscose (100%) yarns and the worse pilling values were existed on the knitted fabrics which are formed from these spun yarns.
PL
Badano poliestrowe przędze staplowe o długości 38 mm i masie liniowej od 0,133 tex - 0,160 tex oraz taśmę wiskozową 591 tex stosowane w mieszankach o różnym udziale poliestru i wiskozy (35/65 %, 50/50 %, 65/35%), oraz przędzę 100% poliestru i 100% wiskozy. Przędze produkowano na przędzarce obrączkowej z prędkością 18000 obr/min z obrączka o średnicy 48 mm i biegaczem typu C o masie 50mg (nr.1/0) następnie otrzymane przędze o masie liniowej 20 tex badano określając ich względną siłę zrywającą wydłużenie przy zrywaniu, nierównomierność masy liniowej i włochatość. Podstawowym celem pracy było określenie włochatości poliestrowo – wiskozowych przędz obrączkowych stosowanych powszechnie w przemyśle włókienniczym jak również ich skłonności do pilingu. Włochatość próbek porównywano stosując trzy przyrządy. Wyniki analizowano biorąc pod uwagę procentowy udział włókien w mieszankach i lokalizację włókien w przędzy określana za pomocą elektronowego mikroskopu skaningowego. Stwierdzono, że najgorszą włochatość wykazują przędze 100% wiskozowe, podobnie jak dzianiny wykonane z tych przędz charakteryzowały się najgorszym pillingiem.
Rocznik
Strony
34--38
Opis fizyczny
Bibliogr. 8 poz., rys.
Twórcy
autor
  • Marmara University, Faculty of Technical Education, Department of Textile Education, Göztepe-34722, Istanbul, TURKEY
  • Marmara University, Faculty of Technical Education, Department of Textile Education, Göztepe-34722, Istanbul, TURKEY
Bibliografia
  • 1.Viswanathan G., Munshi V. G., Ukidve A. V., Chandran K.; Textile Res.J., 1988, 58, 8, pp. 477-479.
  • 2.Brown P.; Textile Res.J., 1978, 48, 3, pp. 162-166.
  • 3.Barella A.; Text Prog, 1993, 24, pp. 2-3.
  • 4.Usta I., Canoğlu S.; Fibres & Textiles in. Eastern Europe, 2002, 10, pp.20-24.
  • 5.Usta I., Canoğlu S.; Indian Journal of Fibre & Textile Research, 2003, 28, pp.157-162.
  • 6.ASTM D 4970-89, Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textiles Fabrics (Martindale Pressure Tester Method).
  • 7.Canoglu S., Yukseloglu S. M.; World Textile Conference 3rd AUTEX CONFERENCE, Gdańsk-Poland, 2003, Book II, pp.19-24, 25-27.
  • 8.Canoglu S., Yukseloglu S. M.; 8.th International Istanbul Textile Conference, Recent Advances in Innovation and Enterprise in Textiles and Clothing Proceedings CD, Istanbul-Turkey, 2005.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-f61d579b-c2a4-4357-9caf-212130dc3a8d
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.