Robotized GMA surfacing of cermetalic layers

• Autorzy: Klimpel A. , Dobrzański L. A. , Kik T. , Rzeźnikiewicz A.
• Języki publikacji: EN

Abstrakty

EN

Purpose: Purpose of these researches was to investigate of influence of heat input in robotized surfacing on quality and properties of cermetalic layers. Design/methodology/approach: The quality of single and multilayer, stringer and weave beads was assessed by abrasion resistance tests according to ASTMG65 standard, erosion resistance tests according to G76 standard, metallographic examinations and hardness tests. Findings: Due to the fact that the it was used robotized surfacing stand, the analysis of properties of the deposits was performed for single and multilayer, stringer and weave beads. Research limitations/implications: For complete information about tested wear plates it is needed to compare theirs properties with others presented technologies of wear plates producing. Practical implications: Results of this paper is to optimal range of parameters of surfacing of single and multilayer, stringer and weave beads of cermetalic layers. Originality/value: The researches (hardness tests, abrasion and erosion resistance tests) were provided for surfacing of single and multilayer, stringer and weave beads, and the results were compared. The influence of heat input on layers properties and theirs structure was defined.

Słowa kluczowe

EN

welding; robotized surfacing; wear plates; abrasion resistance; erosion resistance

PL

spawanie; napawanie zrobotyzowane; tarcze ścierne; odporność na ścieranie; odporność na erozję

• Wydawca: International OCSCO World Press
• Czasopismo: Journal of Achievements in Materials and Manufacturing Engineering
• Rocznik: 2006
• Tom: Vol. 17, nr 1-2
• Strony: 361--364
• Opis fizyczny: Bibliogr. 13 poz., rys., tab.

Twórcy

autor

Klimpel A.

• Welding Department, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland

autor

Dobrzański L. A.

• Division of Materials Processing Technology and Computer Techniques in Materials Science, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland

autor

Kik T.

• Welding Department, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland

autor

Rzeźnikiewicz A.

• Welding Department, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland

Bibliografia

• [1] A. Klimpel: Surfacing and thermal spraying. Warsaw, WNT 2000 (in Polish).
• [2] M. Wysiecki: Modern tool materials. Warsaw, WNT, 1997 (in Polish).
• [3] L.A. Dobrzański: Physical metallurgy with metal science basis. WNT, Ed. 4, Warsaw, 1999 (in Polish).
• [4] A. Klimpel, A. Zając: SSA surfacing examples. Welding Review. 1994. Nr 2-3, s. 5-10 (in Polish).
• [5] A. Klimpel, A.St. Klimpel, A. Rzeźnikiewicz: „MCAW robotized weave beads surfacing. 47. National Scientific-Technically Welding Conference „Achievments and perspectives in welding”. Katowice, 18-20.10.2005, s. 71-76 (in Polish).
• [6] A. Klimpel, J. Górka: „An influence of parameters of MCAW surfaicing on quality of mulitlayers cermets deposits. Welding Review nr 4-5, 2005, s. 45-49 (in Polish).
• [7] A. Klimpel, D. Janicki, A.St. Klimpel, A. Rzeźnikiewicz: „MCAW robotized surfaicing with Ni-WC metal cred wire” COMMENT Worldwide Congress on Materiale and Manufacturing Engineering and Technology. Gliwice-Wisła 16-19. 05. 2005, s. 901-908 (in Polish).
• [8] A. Klimpel, L.A. Dobrzański, D. Janicki, A. Lisiecki: Abrasion resistance of GMA metal cored wires surfaced deposits”. COMMENT. 13th International Scientific Conference On Achievements In Mechanical And Materials Engineering. Wisła16-19.05.2005 s. 311-314.
• [9] K.J.A. Brookes: World Directory and Handbook of Hardmetals and Hard Materials. East Barnet, International Carbide Data. Ed. 6, 1996.
• [10] A. Klimpel, P. PieroĪak, S. Stano: Wear resistance of SSA surfaced layers. Welding Review. 2002. Nr 5, s. 1-6 (in Polish).
• [11] Koji Kato Koshi Adachi “ Wear of advanced ceramics” Laboratory of Tribology, School of Mechanical Engineering, 2002.
• [12] “Standard Test Method for Measuring Abrasion Using the Dry Sand / Ruber Wheel Apparatures” - ASTM G65-00 (2001)
• [13] Castolin Eutectic. Catalogue. Applied-metallurgy products and processes for industrial maintenance and repair