PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Formation of Electrospun PVA Mats on Different Types of Support Materials Using Various Kinds of Grounded Electrodes

Identyfikatory
Warianty tytułu
PL
Formowanie runa z elektroprzędzionych włókien PVA osadzanych na różnych podkładach przy użyciu różnych elektrodT
Języki publikacji
EN
Abstrakty
EN
In this study nanofibres from poly(vinyl alcohol) (PVA) polymers solutions were collected on different types of support material by the electrospinning method (NanospiderTM). During the electrospinning process, the following three different grounded electrodes were used: I - a ylindrical electrode II - a wire grounded electrode, III - a wire grounded electrode, whose distance to the support material was 40 mm. The aim of this research was to investigate the influence of the type of grounded electrode on electrospun PVA nanofibres collected on different support materials and their structure. During the experiments, it was noted that the type of grounded electrode has an influence on a electrospun mat with a PVA nanofibre structure. The diameter of electrospun PVA nanofibres does not depend significantly on the type of grounded electrode and nature of the support material, although it is possible to notice the tendency that it is possible to form a bigger amount of thinner nanofibres using type I grounded electrode.
PL
Włókna elektroprzędzione z PVA osadzane były na podkładach o różnej strukturze z różnych materiałów. Jednocześnie stosowano trzy rodzaje uziemionych elektrod: elektrodę cylindryczną i dwa rodzaje elektrod drutowych, jedną umieszczoną bezpośrednio a drugą w odległości 40 mm od materiału podkładu. Celem badań było określenie wpływu rodzaju elektrody oraz rodzaju podkładu. Stwierdzono, że średnica otrzymywanych nanowłókien w nieznacznym stopniu zależy od stosowanych warunków przędzenia natomiast wpływają one w istotny sposób na strukturę tworzonego runa. Stwierdzono również istnienie tendencji, że przy stosowaniu elektrody cylindrycznej uzyskuje się większą ilość cienkich włókien.
Rocznik
Strony
34--40
Opis fizyczny
Bibliogr. 14 poz., rys., tab., wykr.
Twórcy
  • Lithuania, Kaunas, Kaunas University of Technology, Faculty of Design and Technologies, Department of Textile Technology
autor
  • Lithuania, Kaunas, Kaunas University of Technology, Faculty of Design and Technologies, Department of Textile Technology
Bibliografia
  • 1. Bhardwaj N., Kundu S. C.; Biotechnology Advances Vol. 28 (2010) pp. 325-347.
  • 2. Baji A., Mai Y-W., Wong S-C., Abtahi M., Chen P.; Composites Science and Technology Vol. 70 (2010) pp. 703-718.
  • 3. Cengiz F., Krucińska I., Gliścińska E., Chrzanowski M., Gőktepe F.; Fibres &Textiles in Eastern Europe Vol. 17 No. 1(2009) pp. 13-19.
  • 4. Adomavičiūtė E., Stanys S., Banuškevičiūtė A., Milašius R. Fibres &Textiles in Eastern Europe Vol. 16, No. 1 (2010) pp. 49-53.
  • 5. Adomavičiūtė E., Milašius R. Fibres &Textiles in Eastern Europe Vol. 15, No. 5-6 (2007) pp. 64-65.
  • 6. Huang C. C., Lin C. K., Lu C. T., Lou C. W., Chao C. Y., Lin J. H.; Fibres & Textiles in Eastern Europe Vol. 17 No. 3 (2009) pp. 34-37.
  • 7. Chakraborty S., Liao I-Chien., Adler A., Leong K.W. Advanced Drud Delivery Reviews Vol 61 No. 12 (2009) pp. 1043-1054.
  • 8. Patanaik A., Anandjiwala R. D., Rengasamy R. S., Ghosh A., Pal H.; Textile Progress Vol 39 No 2 (2007) pp.67-120.
  • 9. Luká D., Sarkar A., Martinová L and et.c. Textile Progress Progress Vol 41 No 2 (2009) pp. 59-140.
  • 10. Haiqing Liu., You-Lo Hsieh.; Journal of Polymer Science: Part B: Polymer Physics Vol. 40 (2002) pp. 2119-2129.
  • 11. Hyun Suk Kim., Kwangsok Kim., Hyoung Joon Jin., In-Joo Chin.; Macromolecylar Symposia Vol 224 (2005) pp. 145-154.
  • 12. Hakala T., Heikkilä P. Fibres &Textiles in Eastern Europe Vol. 19, No.1 (2011) pp. 89-93.
  • 13. Adomavičiūtė E., Milašius R., Žemaitaitis A., Bendoriene J., Leskovšek M., Demšar A.; Fibres &Textiles in Eastern Europe Vol. 17, No. 3 (2009) pp. 29-33.
  • 14. Malašauskienė J., Milašius R.; Fibres &Textiles in Eastern Europe Vol. 18, No. 6 (2010) pp. 45-48.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-f5f16e48-93ad-4d9d-b4d9-365d41c110e4
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.