PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Wear Characteristics of Hardfacing Coatings Obtained by Tungsten Inert Gas Method

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This paper evaluates the wear characteristics of hardfacing coatings. Regenerative hardfacing coatings were applied with the TIG (Tungsten Inert Gas) method. The solid welding wires were used to obtain the coatings marked as: EL-500 HB, EL-650 HB, and EL-3348. The tribological analysis of samples was conducted at room temperature. The wear rate was evaluated with a THT 1000 Anton Parr ball-on-disc tribotester, in accordance with the ASTM G-133 standard. The counterbody (static partner) consisted of balls with the diameter of 6 mm made of Al2O3. The test was performed with the sliding speed of the friction pair 0.4 m/s, track radius 10 mm, normal load 20 N, acquisition rate 10 Hz and sliding distance 2000 m. During the test, the friction coefficient and wear rate were recorded. The multi-criteria assessment of the construction materials discussed, while taking into account five criteria, showed that EL-3348 HB is the best material. Computer applications were used for multi-criteria assessment and statistical processing of data.
Słowa kluczowe
Twórcy
  • Lublin University of Technology, Electrical Engineering and Computer Science Faculty, Institute of Computer Science, Nadbystrzycka38, Lublin 20-618, Poland
  • Lublin University of Technology, Mechanical Engineering Faculty, Department of Production Engineering, 36 Nadbystrzycka, Lublin 20-618, Poland
  • Lublin University of Technology, Electrical Engineering and Computer Science Faculty, Institute of Computer Science, Nadbystrzycka38, Lublin 20-618, Poland
autor
  • University of Economics and Innovation in Lublin, Transport and Computer Science Faculty, Projektowa 4, Lublin 20-209, Poland
Bibliografia
  • 1. Dziedzic K., Paszeczko M., Barszcz M., Józwik J.B., Structure and construction assessment of the surface layer of hardfaced coating after friction. Advances Science and Technology Research Journal, 11, 2017, 253–260.
  • 2. Tadeusz Burakowski, Tadeusz Wierzchon, Surface Engineering of Metals: Principles, Equipment, Technologies, Materials Science & Technology, CRC Press, 1998.
  • 3. Correa E. O., Alcantara N. G., Valeriano L. C., Barbedo N. D., Chaves R. R. The effect of microstructure on abrasive wear of a Fe–Cr–C–Nb hardfacing alloy deposited by the open arc welding process, Surface & Coatings Technology, 276, 2015, 479–484.
  • 4. Pashechko M., Dziedzic K., Mendyk E., Jozwik J. Chemical and phase composition of the friction surfaces Fe-Mn-C-B-Si-Ni-Cr hardfacing coatings, Journal of Tribology-Transactions of the ASME, 140, 2018, 021302-1 – 021302-5.
  • 5. Venkatesh B., Sriker K., Prabhakar VSV. Wear characteristics of hardfacing alloys: state-of-the-art, Procedia Materials Science, 10, 2015, 527 – 532.
  • 6. Gualco A., Svoboda H., Surian E. Study of abrasive wear resistance of Fe-based nanostructured hardfacing, Wear, 360, 2016, 14–20.
  • 7. Badisch E., Katsich C., Winkelmann H., Franek F., Roy M. Wear behaviour of hardfaced Fe-Cr-C alloy and austenitic steel under 2-body and 3-body conditions at elevated temperature, Tribology International, 43, 2010, 1234–1244.
  • 8. Gualco A., Marini C., Svoboda H., Surian E. Wear Resistance of Fe-based Nanostructured Hardfacing, Procedia Materials Science, 8, 2015, 934 – 943.
  • 9. Pashechko M., Lenik K., Segregation of atoms of the eutectic alloys Fe–Mn–C–B–Si–Ni–Cr at friction wear, Wear, 267, 2009, 1301–1304.
  • 10. Chaidemenopoulos N.G., Psyllaki P.P., Pavlidou E., Vourlias G. Aspects on carbides transformations of Fe-based hardfacing deposits, Surface & Coatings Technology, 357, 2019, 651–661.
  • 11. Pawar S., Jha A. K., Mukhopadhyay G. Effect of different carbides on the wear resistance of Fe-based hardfacing alloys, International Journal of Refractory Metals & Hard Materials, 78, 2019, 288–295.
  • 12. Hornung J., Zikin A., Pichelbauer K., Kalin M., Kirchgaßner M. Influence of cooling speed on the microstructure and wear behaviour of hypereutectic Fe–Cr–C hardfacings, Materials Science and Engineering: A, 576, 2013, 243-251.
  • 13. Yüksel N., Sahin S. Wear behavior–hardness–microstructure relation of Fe–Cr–C and Fe–Cr– C–B based hardfacing alloys, Materials and Design, 58, 2014, 491–498.
  • 14. Liu D., Liu R., Wei Y., Ma Y., Zhu K. Microstructure and wear properties of Fe–15Cr–2.5Ti–2C–xB wt.% hardfacing alloys. Applied Surface Science, 271, 2013, 253–259.
  • 15. Da Silva L. J., D’oliveira A. NiCrSiBC coatings: Effect of dilution on microstructure and high temperature tribological behaviour, Wear, 350, 2016, 130–140.
  • 16. Hakraborty G., Das C. R., Albert S. K., Bhaduri A. K., Murugesan S., Dasgupta A. Effect of Alloy 625 Buffer Layer on Hardfacing of Modified 9Cr-1Mo Steel Using Nickel Base Hardfacing Alloy, Journal of Materials Engineering and Performance, 25(4), 2016, 1663–1672.
  • 17. Hanna M., Dybowski B., Moskal G. WC-Co coatings and sinters modified with nano-sized TiC microstructure – quantitative evaluation, Advances Science and Technology Research Journal, 11(1), 2017, 220–231.
  • 18. Cicic D. T., Rontescu C., Savulescu V., Bogatu A. M. The processing method of the tungsten electrodes and the current type choice influence on the shape of the welding arc in tungsten inert gas welding (TIG), IOP Conf. Series: Materials Science and Engineering, 400, 2018, 022016.
  • 19. Shahroozi A., Afsari A., Khakan B. Microstructure and mechanical properties investigation of Stellite 6 and Stellite 6/TiC coating on ASTM A105 steel produced by TIG welding process, Surface and Coatings Technology, 350, 2018, 648-658.
  • 20. Józwik J. B., Dziedzic K., Krolczyk G. M., Ostrowski D., Usydus I. Assessment of internal defects of hardfacing coatings in regeneration of machine parts, Journal of Central South University, 25, 2018, 1144–1153.
  • 21. Surdacki P., Montusiewicz J. Approach to multicriterion optimization of quench performance of superconducting winding, IEEE Transactions on Magnetics, 32(3) 1996, 1266-1269.
  • 22. Pashechko M. I., Montusiewicz J. Evaluation of the Wear Resistance of Eutectic Coatings of the Fe- Mn-C-B System Alloyed by Si, Ni, and Cr Using Multi-Criteria Analysis, Materials Science, 47(6), 2012, 813-821.
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-f5ea05ee-54b4-4f41-a4d4-04ecb3701055
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.