Comparative study of conventional and matrix converter fed brushless dc motor drive

• Autorzy: Senthil-Kumar C. , Senthil-Kumar N. , Eswari M.

Warianty tytułu

PL

Analiza porównawcza konwencjonalnego i macierzowego przekształtnika w zastosowaniu do zasilania silnika BLDC

• Języki publikacji: EN

Abstrakty

EN

The conventional DC link converters and matrix converters are used for driving a Brushless DC motor with trapezoidal back electromotive force. This paper deals with design of matrix converter for BLDC motor with the objective of lowering supply current harmonics. A comparative study of conventional DC link converter and three phase matrix converter are presented. It is to be noted that the conventional converters with DC-link requires two stages of conversion, whereas a matrix converter, in a single stage drives a BLDC motor. The proper switching of the matrix converter is designed and presented in this paper. By employing matrix converter, the ac source current becomes nearly sinusoidal and total harmonic distortion gets very much reduced. A matrix converter fed BLDC motor is simulated in MATLAB Simulink and results are shown to validate the harmonic reduction. The hardware implementation of the matrix converter is also discussed in this paper.

PL

W artykule zaprezentowano project przekształtnika macierzowego zastosowanego do zasilania silnika bezszczotkowego BLDC. Porównanokonwencjonalny przekształtnik DC z przekształtnikiem macierzowym trójfazowym. Przedstawiono wyniki symulacji.

Słowa kluczowe

EN

matrix converter; permanent magnet brushless DC motor; DC link converter; total harmonic distortion

PL

przekształtnik macierzowy; silnik bezszczotkowy DC

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2013
• Tom: R. 89, nr 7
• Strony: 35--40
• Opis fizyczny: Bibliogr. 14 poz., rys., tab.

Twórcy

autor

Senthil-Kumar C.

• P.S.R. Engineering College

autor

Senthil-Kumar N.

• Mepco Schlenk Engineering College

autor

Eswari M.

• Kamaraj College of Engineering and Technology

Bibliografia

• [1] Bhim singh and Sanjeev Singh, “State of Art on Permanent Magnet Brushless DC Motor Drives”, Journal of power electronics,Jan (2009), Vol.9, No:1, 1-7.
• [2] Pragesan Pillay and Ramu Krishnan, “Modelling, Simulation and Analysis of Permanent Magnet Motor Drives,Part II: The Brushless DC Motor Drive”, IEEE transactions on industry applications,Mar./Apr.(1989), Vol.IA-25 no.2,274-279.
• [3] Matti Jussila, “Comparison of space vector Modulated Direct and Indirect Matrix converter in low power applications”, Ph.D Thesis, Tampere university of technology (2007).
• [4] P.W.Wheeler, J.Rodriguez, J.C.Clare, L.Empringham and A.Weinstein, “Matrix Converters: A technological Review”, IEEE transactions on Industrial Electronics, Apr.(2002), Vol.49, no.2, 276-288.
• [5] L.Helle, K.B.Larsen, A.H.Jorgensen, S.Munk Nielsen, F.Blaaabjaerg, “Evaluation of Modulation schemes for 3phase to 3phase matrix converter”, IEEE transactions on industrial electronics, Feb (2004), Vol: 51 issue 1, 158-171.
• [6] Domenico Casadei, Givoanni serra, Angelo Tani, Luca Zarri, “Matrix converter Modualtion strategies: A new general approach based on space vactor representation of switch state”, IEEE transactions on industrial electronics, Apr (2002), Vol.49, no.2.
• [7] Huber L, Borojevic D, “Space vector Modulated 3phase to 3phase matrix converter with input power factor correction”, IEEE transactions on industry applications, (1995), Vol.31 no.6, 1234-1246.
• [8] Yulong Li, Namsupchoi, Byung-Moon Han, Kyoung Min Kim, Buhum Lee and Jun-Hyub Park, “Direct Duty Ratio Pulse Width Modualtion method for matrix converters”, International Journal of Control Automation and Systems, Oct (2008), Vol.6 no.5, 600-669.
• [9] Sungmin Kim, Young-Doo Yoon and Seung-Ki Sui, “Pulse Width Modulation method of matrix converters for reducing output current ripple”, IEEE transactions on power electronics, Oct (2010), Vol.25, no.10.
• [10] J.Karpagam, Dr.A.Nirmal Kuamr and V.Kumar Chinnaiyan, “Comparison of modulation techniques for Matrix Conveter”, IACSIT International Journal of Engineering and Technology, Apr (2010), Vol.2, no.2, 189-195.
• [11] Tiangui Jiang, Bozhou, Chumei Hong, Mingming Shi, “New Modulation Scheme for matrix converter driving Brushless DC Motor”, International conference on Electrical machines and systems ICEMS (2008).
• [12] Bala.S, Venkataramanan.G, “Matrix Converter BLDC drive using reverse blocking IGBTs”, Applied Power electronics conference and Exposition,(2006).
• [13] T.J.E.Milller, “Bruhless permanent-Magnet and Reluctance Motor Drives”, Clarendon Press Oxford.
• [14] Xiaoyan Huang, Andrew Goodman,Chris Gerada, Youtong Fang,and Qinfen Lu, "A Single Sided Matrix Converter Drive for a Brushless DC Motor in Aerospace Applications" IEEE Transactions on Industrial Electronics, Sep.(2012), Vol. 59, no. 9, 3542 - 3552.