Analysis of the Pitch Deviation in Involute Splined Connections

• Autorzy: Kroczak J. , Dudziak M.
• Języki publikacji: EN

Abstrakty

EN

The paper presents the measurement results of the pitch deviation for the selected involute splined connections applied in aircraft engines. The authors have stated that there is a lack of exact information on a load distribution in involute splined connections with this type of manufacturing error. Hence, the analysis of the influence of the pitch deviation in a two-dimensional model on the load distribution and stress state is presented. This model gives us an information on the load distribution coefficient in a cross-section of the involute splined connection which depends on torque, tooth pair stiffness and manufacturing accuracy of a part, ie. the pitch deviation.

Słowa kluczowe

EN

involute spline; pitch deviation; load distribution coefficient

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Research
• Rocznik: 2013
• Tom: Vol. 37, No. 1
• Strony: 69--76
• Opis fizyczny: Bibliogr. 9 poz., wykr.

Twórcy

autor

Kroczak J.

• Poznan University of Technology. Chair of Basics of Machine Design

autor

Dudziak M.

• Poznan University of Technology. Chair of Basics of Machine Design

Bibliografia

• 1. Cedoz, R.W., Chaplin, M.R., 1994, Design Guide for Involute Splines, SAE, Warrendale, PA.
• 2. Klebanov, B., Barlam, D., Nystrom, F., 2008, Machine Elements: Life&Design, CRC Press, Boca Raton, FL.
• 3. Kroczak, J., Dudziak, M., Kołodziej, A., 2007, Analiza konstrukcyjna połączenia wielowypustowego, XXIII Sympozjon PKM, Rzeszów-Przemyśl, Tom II, pp. 62-71.
• 4. Kroczak, J., Dudziak, M., 2011, Tolerance analysis of involute splines, Lecture Notes in Engineering and Computer Science, vol. 2192, issue 1, pp. 2361-2363.
• 5. Podolski, T., Dudziak, M., Kroczak, J., 2010, Aspekty projektowania pasowań w połączeniach osiowosymetrycznych, Modelowanie Inżynierskie nr 39, Gliwice, pp. 171-176.
• 6. Podolski, T., Kroczak, J., 2010, Application of FEM in analysis of spigot joint contact problems, Progress in Industrial Mathematics at ECMI2008, Springer-Verlag Berlin Heidelberg, pp. 977-981.
• 7. American Standard ANSI B92.2M-1980 “Involute Splines, Metric Module”.
• 8. German Standard DIN 5480 “Zahnwellen-Verbindungen mit Evolventenflanken”.
• 9. International Standard ISO 4156 “Straight cylindrical involute splines - Metric module, side fit”.