Study of waterproof ability and corrosion resistance of basalt fiber‑reinforced concrete with superhydrophobic surfaces

• Autorzy: Li Yunfeng , Wang Qing , Hou Chen , Song Qingnan , Zhang Rui , Wang Ning

Identyfikatory

DOI

10.1007/s43452-024-00886-w

• Języki publikacji: EN

Abstrakty

EN

Basalt fiber-reinforced concrete (BFRC) is used extensively in bridge engineering. However, seawater can cause the cracking of BFRC bridge concrete and the corrosion of steel reinforcement inside the concrete. In this study, an efficient fabrication method of the superhydrophobic surface of BFRC was used to improve its durability. BFRC has high surface compactness, and sodium stearate can play a better role as a modifier. Through the orthogonal study, superhydrophobic BFRC was prepared, and the effects of three major factors (temperature, time, and concentration) on the wettability of BFRC were investigated. The soaking time and solution concentration were more significant than any other factor. The capillary water absorption of the superhydrophobic BFRC was reduced compared to the BFRC. In addition, the soaking method could improve BFRC corrosion resistance by analyzing the equivalent circuit. The soaking method could improve the durability of BFRC effectively. Meanwhile, BFRC with a superhydrophobic surface had self-cleaning performance and good mechanical robustness. This research extends the scope and field of BFRC and provides technical support for utilizing the existing building.

Słowa kluczowe

EN

basalt fiber reinforced concrete; sodium stearate; self-cleaning; superhydrophobicity; corrosion resistance

PL

beton zbrojony; stearynian sodu; superhydrofobowość; odporność na korozję

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2024
• Tom: Vol. 24, no. 2
• Strony: art. no. e93, 2024
• Opis fizyczny: Bibliogr. 29 poz., rys., tab., wykr,

Twórcy

autor

Li Yunfeng

• College of Civil Engineering and Architecture, Shandong University of Science and Technology, Shandong 266590, China

autor

Wang Qing

• College of Civil and Architectural Engineering, Taishan University, Shandong 271000, China
• Institute of Advanced Engineering Materials and Structures, Taishan University, Shandong 271000, China

• https://orcid.org/0000-0001-7228-6472

autor

Hou Chen

• College of Civil Engineering and Architecture, Shandong University of Science and Technology, Shandong 266590, China

autor

Song Qingnan

• College of Civil Engineering and Architecture, Shandong University of Science and Technology, Shandong 266590, China

autor

Zhang Rui

• College of Civil and Architectural Engineering, Taishan University, Shandong 271000, China
• Institute of Advanced Engineering Materials and Structures, Taishan University, Shandong 271000, China

autor

Wang Ning

• College of Civil Engineering and Architecture, Shandong University of Science and Technology, Shandong 266590, China

Bibliografia

• 1. Cao H, Lang H, Meng S. Experimental Research on the Basic Structure and Properties of the Continuous Basalt Fiber. Hi-Tech Fiber Appl. 2007;35:8.
• 2. Fiore V, Scalici T, Bella G, Valenza A. A review on basalt fibre and its composites. Compos Part B. 2015;74:74-94.
• 3. Novitskii A. High-temperature heat-insulating materials based on fibers from basalt-type rock materials. Refract Ind Ceram. 2004;45:144-6.
• 4. Cui Y. Primary properties of basalt continuous filament. J Text Res. 2005;26:120.
• 5. Dias D, Thaumaturgo C. Fracture toughness of geopolymeric concretes reinforced with basalt fibers. Cem Concr Compos. 2005;27:49-54.
• 6. Kabay N. Abrasion resistance and fracture energy of concretes with basalt fiber. Constr Build Mater. 2014;50:95-101.
• 7. T. Borhan (2013) Thermal and mechanical properties of basalt fibre reinforced concrete, In: Proceedings of World Academy of Science, Engineering and Technology, World Academy of Science, Engineering and Technology (WASET) pp. 712-715.
• 8. Chen J, Akono A. Influence of multi-walled carbon nanotubes on the hydration products of ordinary Portland cement paste. Cement Concrete Res. 2020;137:106197.
• 9. J. Zhao, X. Gao, S. Chen, H. Lin, Z. Li, X. Lin, Hydrophobic or superhydrophobic modification of cement-based materials: A systematic review, Compos. Part B, 243 (2022).
• 10. Lei L, Wang Q, Xu S, Wang N, Zheng X. Fabrication of superhydrophobic concrete used in marine environment with anticorrosion and stable mechanical properties. Constr Build Mater. 2020;251:119846.
• 11. Xu S, Wang Q, Wang N, Qu L, Song Q. Study of corrosion property and mechanical strength of eco-friendly fabricated superhydrophobic concrete. J Clean Prod. 2021;323:129267.
• 12. Hou P, Li R, Li Q, Lu N, Shah S. Novel superhydrophobic cement-based materials achieved by construction of hierarchical surface structure with FAS/SiO2 hybrid nanocomposites. ES Mater Manufactur. 2018;1:57-66.
• 13. Wang W, Wang S, Yao D, Wang X, Zhang Y. Fabrication of all-dimensional superhydrophobic mortar with enhanced water-proof ability and freeze-thaw resistance. Constr Build Mater. 2020;238:117626.
• 14. Zhu Y, Kou S, Poon C, Dai J, Li QY. Influence of silane-based water repellent on the durability properties of recycled aggregate concrete. Cem Concr Compos. 2013;35:32-8.
• 15. Yu J, Li S, Hou D, Jin Z, Liu Q. Hydrophobic silane coating films for the inhibition of water ingress into the nanometer pore of calcium silicate hydrate gels. Phys Chem Chem Phys. 2019;21:19026-38.
• 16. Shen L, Jiang H, Wang T, Chen K, Zhang H. Performance of silane-based surface treatments for protecting degraded historic concrete. Prog Org Coat. 2019;129:209-16.
• 17. Husni H, Nazari MR, Yee HM, Rohim R, Yusuff A, Mohd Ariff MA, Ahmad NNR, Leo CP, Junaidi MUM. Superhydrophobic rice husk ash coating on concrete. Constr Build Mater. 2017;144:385-91.
• 18. Zhao Y, Liu Y, Liu Q, Guo W, Yang L, Ge D. Icephobicity studies of superhydrophobic coatings on concrete via spray method. Mater Lett. 2018;233:263-6.
• 19. Liu P, Gao Y, Wang F, Yang J, Yu X, Zhang W, Yang L. Superhydrophobic and self-cleaning behavior of Portland cement with lotus-leaf-like microstructure. J Clean Prod. 2017;156:775-85.
• 20. Wang F, Liu H, Ou J, Li W. Fast fabrication of superhydrophobic surfaces on hardened cement paste using sodium laurate aqueous solution. Constr Build Mater. 2021;278:1222385.
• 21. Barnat-Hunek D, Smarzewski P. Influence of hydrophobisation on surface free energy of hybrid fiber reinforced ultra-high performance concrete. Constr Build Mater. 2016;102:367-77.
• 22. Fu Q, Xu W, Bu M, Guo B, Niu D. Orthogonal experimental study on hybrid-fiber high-durability concrete for marine environment. J Mater Res Tech. 2021;13:1790-804.
• 23. Deng X, Parkin I, Song J, Zhao D, Han Z, Xu W, Lu Y, Liu X, Liu B, Carmalt CJ. Super-robust superhydrophobic concrete. J Mater Chem A. 2017;5:14542-50.
• 24. Wang P, Yang Y, Wang H, Wang H. Fabrication of super-robust and nonfluorinated superhydrophobic coating based on diatomaceous earth. Surf Coat Tech. 2019;362:90-6.
• 25. Karthick S, Park D, Lee Y, Saraswathy V, Lee H, Jang H, Choi H. Development of water-repellent cement mortar using silane enriched with nanomaterials. Prog Org Coat. 2018;125:48-60.
• 26. Sosa M, Lombardo G, Rojas G, Oneto M, Negri R, D’Accorso N. Superhydrophobic brass and bronze meshes based on electrochemical and chemical self-assembly of stearate. Appl Surf Sci. 2019;465:116-24.
• 27. Feng Z, Wang F, Xie T, Ou J, Xue M, Li W. Integral hydrophobic concrete without using silane. Constr Build Mater. 2019;227:116678.
• 28. John D, Searson P, Dawson J. Use of AC impedance technique in studies on steel in concrete in immersed conditions. Br Corros J. 1981;16:102.
• 29. Feliu V, Gonzalez J, Andrade C, Feliu S. Equivalent circuit for modelling the steel-concrete interface I: experimental evidence and theoretical predictions. Corros Sci. 1998;40:975-93.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa nr POPUL/SP/0154/2024/02 w ramach programu "Społeczna odpowiedzialność nauki II" - moduł: Popularyzacja nauki (2025).