PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Researches regarding the evolution of the coal deposits in “Rosia de Jiu” quarry

Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Badania dotyczące ewolucji złóż węgla w kopalni “Rosia de Jiu”
Języki publikacji
EN
Abstrakty
EN
To study the evolution of the temperature of the stock of coal depending on its storage period, the used method in managing the coal storages is the use of infrared thermography. Infrared thermography allows for the temperatures to be remotely measured (from centimetres to a hundreds of meters) and without direct contact, which is indispensable, for example considering electrical equipment found under tension or in the case of parts or materials with increased temperature or which are inaccessible. The evolution of the measured temperature took into account the following steps: the initiation and appearance of temperature areas, the development phase of the temperature areas and the phase during which the increased temperature cores appear. The evolution of the temperature on steps is presented in data and in graphical mode. After the measurements the entire coal quantity which was analysed was sent to be consumed.
PL
Do badania rozwoju temperatury zapasów węgla w zależności od ich okresu składowania, stosowaną metodą zarządzania magazynami węgla jest termografia podczerwieni. Termografia podczerwieni umożliwia zdalne mierzenie temperatury (od centymetrów do setek metrów) oraz bez bezpośredniego kontaktu, który jest niezbędny, na przykład biorąc pod uwagę urządzenia elektryczne pod napięciem lub w przypadku części lub materiałów o podwyższonej temperaturze lub które są niedostępne. Ewolucja zmierzonej temperatury uwzględniła następujące kroki: inicjacji i wyglądu obszarów temperatury, fazy rozwoju obszarów temperatury i fazy, podczas której pojawiają się rdzenie zwiększonej temperatury. Rozwój temperatury w krokach przedstawiono w danych oraz w postaci graficznej. Po zakończeniu pomiarów całkowita ilość węgla, który analizowano została wysłana do konsumpcji.
Rocznik
Strony
172--178
Opis fizyczny
Bibliogr. 9 poz., rys., tab.
Twórcy
autor
  • University of Petrosani, Faculty of Mechanical and Electrical Engineering
autor
  • University of Petrosani, Faculty of Mechanical and Electrical Engineering
autor
  • University of Petrosani, Faculty of Mechanical and Electrical Engineering
autor
  • University of Petrosani, Faculty of Mechanical and Electrical Engineering
Bibliografia
  • • Davidson R., 1990, Natural oxidation of coal, IEA Coal Research, London, United Kingdom.
  • • Dobra R., Buica G., Pasculescu D., Leba M., 2013, Safety management diagnostic method regarding work cost accidents from electrical power installations. [In:] Proc. 1st Int. Conf. on Industrial and Manufacturing Technologies (INMAT), Vouliagmeni, Athens, Greece.
  • • Huggins F. E., (1989), Chemistry of coal weathering, Elsevier Science Publishers, Amsterdam, Netherlands
  • • Krausz S., Trotea T., Bacalu I., (2003), The bahviour to oxidation and self-heating of lignite from C.N.L. Oltenia, (in Romanian), University of Petrosani, “Minig Revue”,12.
  • • Lizák F., Kolcun M., (2008), Improving reliability and decreasing losses of electrical system with infrared thermography, “Acta Electrotechnica et Informatica”, 8(1).
  • • Meola C., Carlomagno G.M., Giorleo L., (2004), The use of infrared thermography for materials characterization, “Journal of Materials Processing Technology”, 155–156.
  • • Montelpare S., Ricci R., (2004), An experimental method for evaluating the heat transfer coefficient of liquid-cooled short pin fins using infrared thermography, “Experimental Thermal and Fluid Science”, 28.
  • • Sham F.C., Huang Y.H., Liua L., Chen Y.S., Hung Y.Y., Lo T.Y., (2010), Computerized tomography technique for reconstruction of obstructed temperature field in infrared thermography, ”Infrared Physics & Technology”, 53.
  • • Shia W., Wua Y., Wub L., (2007), Quantitative analysis of the projectile impact on rock using infrared thermography, “International Journal of Impact Engineering”, 34.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-f520c0a6-35d6-466a-97c4-1da3e9fcc190
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.