Surface Alloying of Cupronickel Alloy with Aluminum using Tungsten Inert Gas Process

• Autorzy: Koeini Fatemeh , Sohi Mahmoud Heydarzadeh , Pirayesh Parham

Identyfikatory

DOI

10.24425/amm.2023.141490

• Języki publikacji: EN

Abstrakty

EN

Surface melting and alloying of Copper-Nickel (Cupronickel) alloy by preplacing aluminum powder and using tungsten inert gas process (TIG) in shielded atmosphere of argon gas were investigated. Surface melting resulted in the formation of a fairly porous dendritic microstructure. Surface alloying with aluminum resulted in the formation of Al₂Cu and Al₄Cu₉ intermetallic compounds along with Cu-rich matrix and unstable martensitic structure. Surface melting reduced the hardness from 140 HV_0.1 (substrate) to 70 HV_0.1, mainly due to the loss of cold work effect of the initial substrate. On the other hand, surface alloyed zone showed a hardness of 300 HV_0.1, mainly due to the formation of intermetallic compound. Tafel polarization results indicated improvement in corrosion resistance of cupronickel alloy after surface melting and alloying.

Słowa kluczowe

EN

copper-nickel; surface alloying; surface melting; aluminum; TIG

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2023
• Tom: Vol. 68, iss. 1
• Strony: 161--170
• Opis fizyczny: Bibliogr. 54 poz., fot., rys., tab., wykr.

Twórcy

autor

Koeini Fatemeh

• University of Tehran, College of Engineering, School of Metallurgy and Materials Engineering, Tehran, Iran

• https://orcid.org/0000-0002-4174-9945

autor

Sohi Mahmoud Heydarzadeh

• University of Tehran, College of Engineering, School of Metallurgy and Materials Engineering, Tehran, Iran

• https://orcid.org/0000-0001-5622-4482

autor

Pirayesh Parham

• Islamic Azad University, Faculty of Engineering, Department of Metallurgy and Materials, Karaj Branch, Karaj, Iran

• https://orcid.org/0000-0001-7895-7759

Bibliografia

• [1] R. Francis, The Corrosion of Copper and Its Alloys: A Practical Guide for Engineers, NACE International, US. (2010).
• [2] X. Zhu, T. Lei, Corros. Sci. 44, 67-79 (2002).
• [3] A.L. Ma, S.L. Jiang, Y.G. Zheng, W. Ke, Corros. Sci. 91, 245-261 (2015).
• [4] Q. Luo, Z. Qin, Z. Wu, B. Shen, L. Liu, W. Hu, Corros. Sci. 138, 8-19 (2018).
• [5] F. Yang, H. Kang, E. Guo, R. Li, Z. Chen, Y. Zeng, T. Wang, Corros. Sci. 139, 333-345 (2018).
• [6] A. Schüssler, H.E. Exner, Corros. Sci. 34, 1793-1802 (1993).
• [7] S. Nair, R. Sellamuthu, R. Saravanan, Effect of Nickel content on hardness and wear rate of surface modified cast aluminum bronze alloy, in: Mater. Today Proc., Elsevier Ltd, 6617-6625 (2018).
• [8] Z. Wu, Y.F. Cheng, L. Liu, W. Lv, W. Hu, Corros. Sci. 98, 260-270 (2015).
• [9] A.R.J.S. Murthy, H.N.A. L., S.K. H., Adv. Mater. Process. Technol. (2020). DOI: https://doi.org/10.1080/2374068X.2020.1855403
• [10] M.A. Shaik, K.H. Syed, B.R. Golla, Corros. Sci. 153, 249-257 (2019).
• [11] M.D. Fuller, S. Swaminathan, A.P. Zhilyaev, T.R. McNelley, Mater. Sci. Eng. A. 463, 128-137 (2007).
• [12] C. Zhang, P. Lv, J. Cai, C.T. Peng, Y. Jin, Q. Guan, Appl. Surf. Sci. 422, 582-590 (2017).
• [13] C. Zhang, N. Tian, L. Li, Z. Yang, P. Lv, J. Yunxue, H. Zhu, Q. Guan, Vacuum 174, 109222 (2020).
• [14] P.K. Wong, C.T. Kwok, H.C. Man, F.T. Cheng, Corros. Sci. 57, 228-240 (2012).
• [15] C.T. Kwok, P.K. Wong, H.C. Man, Surf. Coatings Technol. 297, 58-73 (2016).
• [16] C.H. Tang, F.T. Cheng, H.C. Man, Surf. Coatings Technol. 182, 300-307 (2004).
• [17] C.H. Tang, F.T. Cheng, H.C. Man, Surf. Coatings Technol. 200, 2602-2609 (2006).
• [18] C.H. Tang, F.T. Cheng, H.C. Man, Surf. Coatings Technol. 200, 2594-2601 (2006).
• [19] G. Rogalski, A. Świerczyńska, M. Landowski, D. Fydrych, Metals 10 (5), 559 (2020). DOI: https://doi.org/10.3390/met10050559
• [20] J. Tomków, K. Sobota, S. Krajewski, Facta Univ. Ser. Mech. Eng. 18, 611-621 (2020). DOI: https://doi.org/10.22190/FUME200520044T
• [21] J. Górka, M. Przybyła, M. Szmul, A. Chudzio, D. Ładak, Adv. Mater. Sci. 19 (3), 55-64 (2019). DOI: https://doi.org/10.2478/adms-2019-0017
• [22] S.A. Kumar, P. Sathiya, Mater. Manuf. Process. 30 1154-1159 (2015).
• [23] M. Heydarzadeh Sohi, S.M.H. Hojjatzadeh, A. Khodayar, A. Amadeh, Surf. Coatings Technol. 325, 617-626 (2017).
• [24] D. Raju, A.R. Govindan, J. Subramanian, S. Ramachandran, S. Nair, Surface alloying of aluminium bronze with chromium: Processing, testing, and characterization, in: Mater. Today Proc., Elsevier Ltd, 2191-2199 (2019).
• [25] A. Ardeshiri, M.H. Sohi, A. Safaei, Surf. Coatings Technol. 310, 87-92 (2017).
• [26] J.H. Park, Y.H. Kim, H.J. Baek, S.M. Cho, J. Manuf. Process. 40, 140-148 (2019).
• [27] L. Brown, Cost-Effective Manufacturing: Joining of Copper and Copper Alloys, CDA. Publ. (98) (1994).
• [28] S. Dadras, M.J. Torkamany, J. Sabbaghzadeh, Opt. Lasers Eng. 46, 769-776 (2008).
• [29] F.H. Ley, S.W. Campbell, A.M. Galloway, N.A. McPherson, Int. J. Adv. Manuf. Technol. 80, 1213-1221 (2015).
• [30] D.L. Olson, T.A. Siewert, S. Liu, G.R. Edwards, ASM Handbook, Vol. 6 Welding, Brazing, and Soldering, ASM International, Metals Park, Ohio (1993).
• [31] W.K. Hamoudi, R.A. Ismail, F.I. Sultan, S. Jaleel, Lasers Manuf. Mater. Process. 4, 24-35 (2017).
• [32] D. Zuo, S. Hu, J. Shen, Z. Xue, Mater. Des. 58, 357-362 (2014).
• [33] E.B. Hannech, N. Lamoudi, N. Benslim, B. Makhloufi, Surf. Rev. Lett. 10 (4), 677-683 (2003).
• [34] B. Çorlu, M. Ürgen, Surf. Coatings Technol. 205, 540-544 (2010).
• [35] H. Xu, C. Liu, V.V. Silberschmidt, S.S. Pramana, T.J. White, Z. Chen, V.L. Acoff, Acta Mater. 59, 5661-5673 (2011).
• [36] F.A. Anene, N.E. Nwankwo, V.U. Nwoke, Metall. Mater. Eng. 25, 147-162 (2019).
• [37] J. Fang, G. Song, W. Liu, Q. Li, Microstructure evolution of ascast nickel aluminum bronze under electropulsing, in: Key Eng. Mater., Trans Tech Publications Ltd, 28-34 (2020).
• [38] H.K. Chandra Mohan, S. Devaraj, K.S. Narayana Swamy, Metallogr. Microstruct. Anal. 10, 36-45 (2021).
• [39] T. Murray, S. Thomas, Y. Wu, W. Neil, C. Hutchinson, Addit. Manuf. 33, 101122 (2020).
• [40] Z. Qin, Q. Zhang, Q. Luo, Z. Wu, B. Shen, L. Liu, W. Hu, Corros. Sci. 139, 255-266 (2018).
• [41] J. Dutta Majumdar, I. Manna, Mater. Sci. Eng. A. 268, 216-226 (1999). DOI: https://doi.org/10.1016/s0921-5093(99)00112-4
• [42] A. Morales, O. Piamba, J. Olaya, Coatings. 9 (11), 722 (2019). DOI: https://doi.org/10.3390/coatings9110722
• [43] W.G. Jiru, M.R. Sankar, U.S. Dixit, J. Mater. Eng. Perform. 25, 1172-1181 (2016).
• [44] M. Scendo, S. Spadlo, K. Staszewska-Samson, P. Mlynarczyk, Metals 10 (7), 966 (2020). DOI: https://doi.org/10.3390/met10070966
• [45] X. Zhao, Y. Qi, J. Wang, Z. Zhang, J. Zhu, L. Quan, D. He, Materials 13 (7), 1790 (2020). DOI: https://doi.org/10.3390/ma13071790
• [46] X. Zhao, Y. Qi, J. Wang, T. Peng, Z. Zhang, K. Li, Metals 10 (9), 1227 (2020). DOI: https://doi.org/10.3390/met10091227
• [47] D.R. Ni, B.L. Xiao, Z.Y. Ma, Y.X. Qiao, Y.G. Zheng, Corros. Sci. 52, 1610-1617 (2010). DOI: https://doi.org/10.1016/j.corsci.2010.02.026
• [48] Z. Qin, D.H. Xia, Y. Zhang, Z. Wu, L. Liu, Y. Lv, Y. Liu, W. Hu, Corros. Sci. 174, 108744 (2020).
• [49] J.A. Wharton, K.R. Stokes, Electrochim. Acta. 53, 2463-2473 (2008).
• [50] B. Sabbaghzadeh, R. Parvizi, A. Davoodi, M.H. Moayed, Mater. Des. 58, 346-356 (2014).
• [51] D. Liu, H. Chen, J. Wu, E. Then, Corrosion Behavior of Cu-Al Intermetallic Compounds in Copper Wire Bonding in Chloride-Containing Accelerated Humidity Testing, in: Proc. - Electron. Components Technol. Conf., Institute of Electrical and Electronics Engineers Inc. 629-636 (2016).
• [52] Q.N. Song, Y.G. Zheng, D.R. Ni, Z.Y. Ma, Corrosion 71, 606-614 (2015).
• [53] R.M. Pidaparti, B.S. Aghazadeh, A. Whitfield, A.S. Rao, G.P. Mercier, Corros. Sci. 52, 3661-3666 (2010).
• [54] A. Al-Hashem, W. Riad, Mater. Charact. 48, 37-41 (2002).

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).