Material factors in relation to development time in liquid-penetrant inspection. Part 3. Testing of model plates

• Autorzy: Irek P. , Słania J.

Identyfikatory

DOI

10.1515/amm-2017-0006

• Języki publikacji: EN

Abstrakty

EN

The paper is the continuation of the previous ones entitled „Material factors in relation to development time in liquid-penetrant inspection. Part 1. Material factors“ and „Material factors in relation to development time in liquid-penetrant inspection. Part 2. Investigation programme and preliminary tests“ in which material factors influencing essentially the development time in penetrant testing as well as the range of their values have been specified. These factors are: material kind, surface roughness and imperfection width. In the paper it has been described how far the development time in colour penetrant testing is influenced by an individual material factor. Moreover, it has been presented the equation being the function of material factors and development time.

Słowa kluczowe

EN

imperfection; defect; penetration testing; adhesion

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 1
• Strony: 41--49
• Opis fizyczny: Bibliogr. 11 poz., rys., tab.

Twórcy

autor

Irek P.

• Institute of Welding, Poland, 16-18 Bł. Czesława Str., 44-100 Gliwice, Poland

autor

Słania J.

• Institute of Welding, Poland, 16-18 Bł. Czesława Str., 44-100 Gliwice, Poland

Bibliografia

• [1] J. Czuchryj, S. Sikora: Podstawy badań penetracyjnych wyrobów przemysłowych (Grounds of penetration testing of industrial products), Instytut Spawalnictwa s. 5-24, Gliwice 2007.
• [2] A. V. Pocius: Adhesion and Adhesives Technology, Hanser, New York 1997.
• [3] G. Salomon: Adhesion and Adhesives, Elsevier, Amsterdam 1965.
• [4] M. Żenkiewicz, Adhezja i modyfikowanie warstwy wierzchniej tworzyw wielocząsteczkowych (Adhesion and modification of surface layers of multimolecular materials), Wydawnictwa Naukowo- Techniczne, s. 26-70, Warszawa 2000.
• [5] B. V. Derjagin, I. N. Aleinikova, Yu. P. Toporov: On the role of electrostatic forces in the adhesion of polymer particles to solid surfaces. Progress in Surface Science 45, 1-4, 119-123 (1994).
• [6] M. Wiśniewska: Chemia (Chemistry). Wydawnictwa Naukowo- -Techniczne, Warszawa 2001.
• [7] R Burdzik, Z Stanik, J Warczek, Method of assessing the impact of material properties on the propagation of vibrations excited with a single force impulse, Archives of Metallurgy and Materials 57, 2, 409-416 (2012).
• [8] T. Wegrzyn, J. Piwnik, B. Łazarz, D. Hadrys, Main micro-jet cooling gases for steel welding, Archives of Metallurgy and Materials 58, 2, 556-559 (2013).
• [9] A. Lisiecki, Welding of titanium alloy by Disk laser. Proc. of SPIE Vol. 8703, Laser Technology 2012: Applications of Lasers, 87030T (January 22, 2013), DOI: 10.1117/12.2013431.
• [10] A. Kurc-Lisiecka, W. Ozgowicz, W. Ratuszek, J. Kowalska, Analysis of Deformation Texture in AISI 304 Steel Sheets, Solid State Phenomena 203-204, 105-110, June 2013, Doi 10.4028/ www.scientific.net/SSP.203-204.105.
• [11] T. Wegrzyn, J. Piwnik, B. Łazarz, W Tarasiuk, Mechanical properties of shaft surfacing with micro-jet cooling, Mechanika. 21, 5, 419-423 (2015).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).