PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Use of Eco-friendly Protective Compounds to Increase Crack Resistance of Timber Structures

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The paper presents the research results on using eco-friendly impregnation materials to reduce cracking in load-bearing timber elements. The behaviour of pine elements was studied when impregnation materials based on linseed oil were used. Statistical data are given on the reduction in the growth rate of the length and width of cracks, dependent on the number of protective layers of the finishing material. The effect of the absence of cracks on timber elements during atmospheric drying is described, considering the use of a three-layer paint and varnish coating. The effect of the increase in timber structures’ durability and corresponding cost and material consumption reduction in timber structures have been proven.
Rocznik
Tom
Strony
74--82
Opis fizyczny
Bibliogr. 22 poz., rys.
Twórcy
  • Koszalin University of Technology, Poland
  • Saint Petersburg State University of Architecture and Civil Engineering, Russia
  • Saint Petersburg State University of Architecture and Civil Engineering, Russia
  • Saint Petersburg State University of Architecture and Civil Engineering, Russia
autor
  • Saint Petersburg State University of Architecture and Civil Engineering, Russia
Bibliografia
  • Ashkenazi, E. (1978). Anisotropy of wood and wooden materials. Moscow: Forest industry (in Russian).
  • Bashkirova, K.A., Gazeev, M.V., Sviridov, A.V. (2022). Features of planning an experiment to develop a new paint and varnish composition for the formation of protective and decorative coatings on wood products. Conference Series: Earth and Environmental Science, 949(1). DOI: 10.1088/1755-1315/949/1/012065
  • Belyaev, A.O., Danilov, V.E., Morozova, M.V. (2021). Physical and mechanical properties of the surface of pine wood modified with an organomineral composition. Journal of Physics: Conference Series. 2124(1). DOI: 10.1088/1742-6596/2124/1/012019
  • Berge, B. (2009). Ecology of building materials. 2nd ed. Abingdon: Routledge.
  • Bi, Z., Morrell, J., Lei, Y., Yan, L., Ji, M. (2022). Eco-friendly and mildly modification of wood cell walls with heat treated wood extracts to improve wood decay resistance. Industrial Crops and Products, 184. 115079. DOI: 10.1016/j.indcrop.2022.115079
  • Chernykh, A. (2010). Timber house construction. Architecture. Structures. Estimate. St Petersburg: SPbGASU (in Russian).
  • Chernykh, A., Mironova, S., Mamedov S. (2020). Ecological peculiarities and problems of glued timber structures reinforcement. Rocznik Ochrona Srodowiska, 22(1). 203-213.
  • Chernykh, A., Glukhikh, V., Akopyan, A. (2021). On the issue of shrinkage stresses in the early and late zones of the annual layers of wood. Proceedings of St. Petersburg State Forest Technical Academy. No 201. 166-176 (in Russian).
  • Code of Rules. SP 64.13330.2017. Timber structures. Updated edition of SNiP 11-25-80 (2017). Moscow: The Ministry of Construction of Russia (in Russian).
  • Eliseeva, L. (2000). Criteria for choosing paints and varnishes for facades finishing. Building Materials, 10. 8-11 (in Russian).
  • European Standart CSN EN 14081-1. Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements (2019). Brussels: European Committee for Standardization.
  • Frühwald, A. (2007). The Ecology of Timber Utilization Life Cycle Assessment Carbon Management, etc. Hamburg: University of Hamburg.
  • Glukhikh, V. (2007). Anisotropy of wood as a factor to improve the quality of lumber drying. St. Petersburg: Publishing House of St. Petersburg University (in Russian).
  • Onegin, V., Sergeevichev, A. (2019). Features of the interaction of paint and varnish materials with the substrate. In: Scientific and technical conference on the results of research work in 2019. Collection of articles based on conference materials. Rep. Editor V. Sokolova. 375-378 (in Russian).
  • Prieto, J., Kiene, J. (2018). Wood Coatings. Hannover: Vincentz Network.
  • Samyn, P., Bosmans, J., Cosemans, P. (2022). Influence of UV curing parameters for bio-based versus fossil-based acrylates in mechanical abrasion. Express Polymer Letters, 16(7). 718-734. DOI: 10.3144/expresspolymlett.2022.53
  • Serov, E., Labudin, B. (2013). Glued timber structures: condition and development problems. Bulletin of higher educational institutions, 2(332). 137-146 (in Russian).
  • Sorokin, M., Kochnova, Z., Shode, L. (1989). Chemistry and technology of film-forming substances. Moscow: Chemistry (in Russian).
  • Tang, G. Li, Y., Buzoglu, Kurnaz, L., Li, J. (2021). Development of eco-friendly antifungal coatings by curing natural seed oils on wood. Progress in Organic Coatings, 161. 106512. DOI: 10.1016/j.porgcoat.2021.106512.
  • Tarım, A., Küçükali, U.F. (2017). Evaluating the Ecological Architecture: using the Wooden Material. Intern. Jour. of Archit. and Designe, 3(2). 1-12.
  • Ugolev, B. (1977). Deformability of wood and stress during drying. Moscow: Forest industry (in Russian).
  • Yona, A.M.C., Žigon, J., Kamlo, A.N., Pavlič, M., Dahle, S., Petrič, M. (2021). Preparation, surface characterization, and water resistance of silicate and sol‐silicate inorganic-organic hybrid dispersion coatings for wood. Materials, 14(13). DOI: 10.3390/ ma14133559.
Uwagi
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-f46e9598-fbe1-42d9-b5de-28b486d49497
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.