Effect of dispersion hardening process on change of R_m tensile strength of EN AC-46000 alloy

• Autorzy: Pezda J.
• Języki publikacji: EN

Abstrakty

EN

Heat treatment of aluminum alloys is performed mainly to increase mechanical properties of the alloys. Very important issue, from improvement of mechanical properties point of view as well as economical aspects of performed treatment, is selection of a suitable parameters of solutioning and ageing operations. The paper presents results of the investigations concerning effect of the performed heat treatment on change of tensile strength of the EN AC-46000 (AlSi9Cu3) alloy. Investigated alloy was melted in electric resistance furnace. Run of crystallization is presented with making use of the thermal derivative method (ATD). This method was also implemented to determination of heat treatments’ temperature range of the alloy. Performed heat treatment resulted in growth of the R_m tensile strength. Performed tests have enabled determination of temperature and duration of solutioning and ageing operations of the investigated alloy, which would condition obtainment of improved R_m tensile strength. The tests were performed in laboratory conditions.

Słowa kluczowe

EN

heat treatment; thermal derivative method; tensile strength

PL

obróbka cieplna; metoda ATD; wytrzymałość na rozciąganie

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2010
• Tom: Vol. 10, iss. 1 spec.
• Strony: 135--138
• Opis fizyczny: Bibliogr. 18 poz., rys., tab., wykr.

Twórcy

autor

Pezda J.

• Institute of Chipless Technology, ATH Bielsko-Biała, Willowa 2, 43-309 Bielsko-Biała

Bibliografia

• [1] P. Wasilewski, Silumins – Modification and its impact on structure and properties, PAN Solidification of metals and alloys, Zeszyt 21, Monografia, Katowice 1993 r.
• [2] S. Pietrowski, Silumins, Wydawnictwo Politechniki Łódzkiej, Łódź 2001 (in Polish).
• [3] J. Braszczyński, Theory of foundry processes, PWN, Warszawa 1989 (in Polish).
• [4] Z. Poniewierski, Crystallization and properties of silumins, WNT Warszawa 1989 (in Polish).
• [5] W. Orłowicz, M. Mróz, M. Tupaj, Effect of modification and mold temperature on mechanical properties of AlSi7Mg alloy, Archives of Foundry vol. 6, No. 18 (2006) 117-124 (in Polish).
• [6] F. Romankiewicz, R. Romankiewicz, The influence of modification for structure and morphology fractures of alloy AlSi132, Archives of Foundry vol. 6, No. 22 (2006) 436-440 (in Polish).
• [7] Ogris E., Wahlan A., Lüchinger H., Uggowitzer P.J.: On the silicon spheroidization Al-Si alloys. Journal of Ligt Metals, 2 (2002), pp. 263-269.
• [8] J. R. Kaufman, E.L. Rooy, Aluminium Alloy Castings: Properties, Processes & Applications, ASM International 2004.
• [9] A. Bialobrzeski, P. Dudek, A. Fajkiel, W. Leśniewski, Preliminary investigations into the technology of continuous sodium modification of Al.-Si alloys, Archives of foundry, vol. 6 No 18 (1/2) (2006) 97-103 (in Polish).
• [10] J. Piątkowski, F. Bińczyk, Analysis of solidification and microstructure of Al-Si alloys, Archives of Foundry vol. 6, No. 19 (2006) 227-232 (in Polish).
• [11] P. Wasilewski, Comparison methods of solidification and crystallization alloys of metals, Archives of Foundry, vol. 3, No. 10/2003 323-337 (in Polish).
• [12] S. Pietrowski, Low-siliceous Al-Si alloys with Ni, Cu and Mg additions, Archives of Foundry vol. 6, No. 22 (2006) 414-429 (in Polish).
• [13] J. Piątkowski, J. Szymszal, Thermal analysis and microstructure of master alloys used for modification of silumins, Archives of Foundry engineering, vol. 9, Iss. 3 (2009) 129-132.
• [14] S. Pietrowski, T. Szymczak, Silumins alloy crystallization, Archives of Foundry engineering, vol. 9, Iss. 3 (2009) 143-158.
• [15] T. Ciućka, Analysis of Al-Mg casting alloys crystallization with use of ATND method, Archives of Foundry Engineering vol. 8, Iss. 4/2008, 27-30.
• [16] J. Pezda, Registration of melting and crystallization process of MCMgLi8Ca5 alloy with use of ATND method, Archives of Foundry Engineering vol. 9, Iss. 2/2009, 5-9.
• [17] J. Pezda, Effect of selected heat treatment parameters of AK9 silumin on its tensile strength, Archives of Foundry Engineering, vol. 8, Iss. 3/2008 81-84.
• [18] W. Orłowicz, M. Tupaj, M. Mróz, Selecting of heat treatment parameters for AlSi7Mg0,3 alloy, Archives of Foundry, vol. 6, No. 22 (2006) 350-356 (in Polish).