PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

FEM based IPMSM optimization

Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Optymalizacja MES maszyny synchronicznej z magnesami zagnieżdżonymi
Języki publikacji
EN
Abstrakty
EN
The work presented in this paper relates to the Interior Permanent Magnet Synchronous Motor (IPMSM) optimization procedure programed in Matlab and Maxwell environments. The stator of the machine is an mass-produced one with concentrated winding. In the first optimization stage geometry of IPMSM machine was considered, concerning average torque value maximization and cogging torque minimization with physical and technological constraints. By combining Matlab software and Maxwell application authors used genetic algorithm for Finite Element Model optimization. Moreover Ld and Lq inductances were estimated for evaluation of CPSR machine capabilities and selection for the best geometry among Pareto Front solutions.
PL
Artykuł podejmuje temat optymalizacji maszyn synchronicznych z magnesami zagnieżdżonymi z wykorzystaniem narzędzi Matlab i Maxwell. Dokonano optymalizacji geometrii wirnika maszyn o zadanych parametrach stojana, z uwzględnieniem maksymalizacji wartości średniej momentu elektromagnetycznego i minimalizacji momentu zaczepowego oraz ograniczeń geometrycznych i technologicznych. W programie Matlab zaimplementowano algorytm genetyczny użyty do optymalizacji modelu MES stworzonego w programie Maxwell. Ponadto wyznaczono indukcyjności w osiach d oraz q dla wybranych struktur wirnika wskazanych frontem Pareto w celu wyboru optymalnego rozwiązania zapewniającego szeroki zakres pracy maszyny przy stałej mocy.
Rocznik
Tom
Strony
99--102
Opis fizyczny
Bibliogr. 18 poz., rys., tab.
Twórcy
autor
  • West Pomeranian University of Technology Szczecin Department of Power Systems and Electrical Drives
autor
  • West Pomeranian University of Technology Szczecin Department of Power Systems and Electrical Drives
Bibliografia
  • [1]. Di Barba P., Mognaschi M. E.: Industrial design with multiple criteria: shape optimization of a permanent-magnet generator, IEEE Transaction on Magnetics, vol. 45, no. 3, pp. 1482-1485, (2009)
  • [2]. Paplicki P., The new generation of electrical machines applied in hybrid drive car, Electrical Review, R. 86, no. 6, pp. 101-103, (2010)
  • [3]. May H., Pałka R., Paplicki P., Szkolny S., Wardach M.: Comparative research of different structures of a permanent-magnet excited synchronous machine for electric vehicles, Electrical Review, no. 12a/2012, pp. 53-55, (2012)
  • [4]. Di Barba P., Mognaschi M. E., Pałka R., Paplicki P., Szkolny S.: Design optimization of a permanent-magnet excited synchronous machine for electrical automobiles, International Journal of Applied Electromagnetics and Mechanics, IOS Press, vol. 39, no. 1-4, pp.889-895, (2012)
  • [5]. Stumberger B, Hamler M., Trlep M., Jesenik M.: Analysis of Interior Permanent Magnet Synchronous Motor Designed for Flux Weakening Operation, IEEE Transaction on Magnetics, Vol. 37, No. 5, pp. 3644-3647, (2001)
  • [6]. Pałka R., Paplicki P., Piotuch R.,Wardach M.: Maszyna z magnesami o regulowanym wzbudzeniu– wybrane wyniki prac projektowych, Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej, Vol 66, no. 32, pp. 128-133 (2013)
  • [7]. Dutta R.: A Segmented Interior Permanent Magnet Synchronous Machine with Wide Field- Weakening Range, The University of New South Wales, PhD thesis, (2007)
  • [8]. Keyahani A., Murthy S. K., Studer C. B., Sebastian T.: Study of cogging torque in permanent magnet machines, Electric Machines and Power Systems”, no. 27, pp. 665-678, (1999)
  • [9]. Wardach M.: Cogging torque reducing in electric machine by poling modification of magnetic circuit, Electrical Review, No. 2, pp. 131-133, (2009)
  • [10]. Putek P., Slodička M., Paplicki P., Pałka R.: Minimization of cogging torque in permanent magnet machines using the topological gradient and adjoint sensitivity in multi-objective design, International Journal of Applied Electromagnetics and Mechanics, vol. 39, no. 1-4, pp. 933-940, (2012)
  • [11]. Putek P., Paplicki P., Slodička M., Pałka R., Van Keer R., Application of topological gradient and continuum sensitivity analysis to the multiobjective design optimization of a permanentmagnet excited synchronous machine, Electrical Review, vol. 88, no 7a, pp. 256-260, (2012)
  • [12]. Caramia R. Piotuch R. Pałka R.: Multiobjective FEM based optimization of BLDC motor using Matlab and Maxwell scripting capabilities, Archives of Electrical Engineering, vol. 63(1), pp. 115-124, (2014)
  • [13]. Piotuch R.: Inductance calculation considering magnetic saturation of interior permanent magnet synchronous machines, Informatyka, Automatyka Pomiary w Gospodarce i Ochronie Środowiska vol. 2. pp. 29-33 (2013)
  • [14]. Rahman M., Zhou P.: Determination of saturated parameters of pm motors using loading magnetic fields, IEEE, Transactions on Magnetics, Vol. 27, No. 5, (1991)
  • [15]. Caramia R. Piotuch R. Pałka R.: Multiobjective geometry optimization of BLDC motor using an evolutionary algorithm, Zeszyty problemowe – Maszyny Elektryczne vol. 100, part I. pp. 89-94. (2013)
  • [16]. Deb K., Pratap A., Agarwal S., Meyarivan T.: A fast and elitist multiobjective genetic algorithm: NSGA-II, IEEE Transactions On Evolutionary Computation, vol. 6, no. 2, April (2002)
  • [17]. Sobczyk T.: Problems of mathematical modelling of permanent magnet synchronous generator, Prace Instytutu Elektrotechniki, vol. 231, pp. 99-123, (2007)
  • [18]. Pałka R., Paplicki P., Piotuch R., Wardach M.: Simulation results of a permanent magnet synchronous motor with interior rotor which is controlled by the hysteresis current controller, Electrical Review, no. 02b/2013, pp. 147-149, (2013)
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-f442d5c1-dd41-48e6-9f8c-b87cc554e25f
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.