PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Mathematical Model of the Heald with Damping Element

Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This study focuses on the analysis of the existing design solution of shedding mechanism. It is characterised by a heald attachment into the heald shaft with a necessary design allowance. The preparation of a mathematical model for the new concept of the heald attaching to the heald shaft frame is explained in this study. A damping element for dissipating the energy created during the heald impact on the carrying wire of the heald shaft is currently used for the high-speed weaving loom. This system makes use of a damping element, fitted in the profile of the rod at an optimum distance from heald eye. This element provides for reduction of the heald velocity before its drop upon the supporting wire because the opposite section of the heald is pressed into the rubber element. The calculated results of the new concept of the heald attaching to the heald shaft frame are compared with the existing solution without application of the damping element.
Twórcy
autor
  • Department of Textile Machine Design of Technical University of Liberec, Liberec, Czech Republic, Studentska 2, +420 48 5353174
  • Department of Textile Machine Design of Technical University of Liberec, Liberec, Czech Republic, Studentska 2, +420 48 5353174
Bibliografia
  • [1] Recep E., Gülcan Ö., Yildiray T.: Kinematics of Rotary Dobby and Analysis of Heald Frame Motion in Weaving Process. Textile Research Journal, 2008 Vol. 78, No. 12, pp. 1070-1079, USA.
  • [2] Eren R., Ozkan G., Mehmet Karahan M.: Comparison of Heald Frame Motion Generated by Rotary Dobby and Crank & Cam Shedding Motions. FIBRES & TEXTILES in Eastern Europe. Vol. 13, No. 4 2005, ISSN 1230-3666.
  • [3] Kapucu, S., Das, M., T., Kilic, A.: Cam Motion tuning of Shedding Mechanism for Vibration Reduction of Heald frame. Gazi University Journal of Science - Volume 23, Issue 2, 2010, Pages 227-232. Turkey.
  • [4] Abdullah G., Hasçelik B., Palamutcu S., Soydan A.S.: Synthesis Work About Driving Mechanism Of A Novel Rotary Dobby Mechanism, Tekstil ve Konfeksiyon, Volume 20, Issue 3, 2010, pages 218-224. Turkey.
  • [5] Terentyev, V.I., Smirnov, B.N.: Dynamics of a shedding mechanism with flexible links. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekdtilnoi Promyshlennosti - Issue 2, 2011, Pages 80-83. Russia.
  • [6] Korolev, P.A., Lohmanov, V.N.: Kinematics of connections of the shedding mechanism of a circular loom TKP- 110-U. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstilnoi Promyshlennosti - Issue 4, 2011, Pages 116-119. Russia.
  • [7] Mukras S., Kim N. H., Mauntler N. A., Schmitz T. L., Sawyer W. G.: Analysis of planar multibody systems with revolute joint wear, Wear, Volume 268, Issues 5-6, 11 February 2010, Pages 643-652, ISSN 0043-1648.
  • [8] Tian Q., Zhang Y., Chen L., Yang J.: Simulation of planar flexible multibody systems with clearance and lubricated revolute joints. Nonlinear Dynamics, Volume 60, Issue 4, June 2010, pp 489-511.
  • [9] lores P., Koshy C. S., Lankarani H. M., Ambrósio J., Claro J. C. P.: Numerical and experimental investigation on multibody systems with revolute clearance joints. Nonlinear Dynamics, Volume 65, Issue 4, September 2011, pp 383- 398.
  • [10] Mrázek, J.: Theoretical analysis of dynamics four-bar beat up mechanisms of a loom. In.: Mechanism and machine theory, Pergamon Press, 1992, USA.
  • [11] Bílek, M., Mrázek, J.: Dynamic Stress of Heald Shaft of Weaving Looms. Vlákna a textil, 1998, è.3, s. 131-134, Slovakia.
  • [12] Bílek, M., Skřivánek J.: Mathematical modeling of the system shedding motion - heald - warp, AUTEX Research Journal, Vol. 14, No. 2, June 2013, Pages 42-46. ISSN 1470-9589. Poland.
  • [13] Bílek, M.; Beran, J.: Dynamický model prošlupního mechanismu tkacího stroje. In. Aplikovaná mechanika 2001. Plzeò: Západoèeská univerzita v Plzni, 2001, s. 11- 17.
  • [14] Beran J.; Bílek M.: Matematické modelování základních mechanismù tkacího stroje. In TRANSFER 2000. Trenèín: TnU, Slovensko, 2000. s 25-30.
  • [15] Akamura, T., Kinari, T., Shimokawa, T., Miyashita, D., Mochizuki, Y., Shintaku, S.: Jumping behavior of heald in a shedding motion of loom. Journal of Textile Engineering, Volume 52, Issue 2, 2006, Pages 87-92. Japan.
  • [16] Bílek, M., Kovář, Š.: Record of the movement of heald in the weaving loom. In IX. International Conference on the Theory of Machines and Mechanism in association with the II. CEACM Conference on Computational Mechanics 2004. Liberec: TUL, 2004, pp. 87-92.
  • [17] Bílek, M., Kovář, Š.: Mathematical model of the heald shaft of the weaving loom. Buletinul institutului polytehnic din Iaşi. Technical University of Iaşi, 2007 Iaşi, fasc. 5, volume 1, pp. 375-382. Romania.
  • [18] Hong Jun, C., Li Jun, L. Analysis on Warpś Frictional Movement in the Heald Eye during Weaving Process. Advanced materials Research Volume 175-176, January 2011, Pages 490-495.
  • [19] Bílek, M.: Analysis of Head Motion during of Weaving Process, XI. International Conference on the Theory of Machines and Mechanisms, September 4-6. 2012, Liberec, Czech Republic, p. 367-373, ISBN 978-94-007- 5124-8, Springer Science Business Media Dordrecht.
  • [20] Tumajer P., Ursíny P., Bílek M., Mouèková E.: Use of the vibtex vibration system for testing textiles, AUTEX Research Journal, Vol. 11, No2, June 2011, ISSN 1470- 9589.
  • [21] Tumajer P., Ursíny P., Bílek M., Mouèková E.: Research Methods for the Dynamic Properties of Textiles. FIBRES & TEXTILES in Eastern Europe 2011, Vol. 19, No. 5 (88) pp. 33-39.
  • [22] Tumajer P., Ursíny P., Bílek M., Mouèková E., Pokorná M.: Influence of structure of the yarn on mechanical characteristics of yarns exposed to dynamic stress, Autex Research Journal, Volume 12, Issue 2, June 2012, Pages 44-49.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-f375d551-2cf6-42cf-9eb4-1824633b6337
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.