Stress Analysis and Design Optimization with Catia

• Autorzy: İrsel G.
• Języki publikacji: EN

Abstrakty

EN

Stress analysis obtained from CAE methods is one of the most important parameter of designing parts, assemblies and constructions. Loads and stress limits applied on the model should be known also for better design procedure. Evaluation of all parameters is known as optimization. Designed model should contain the optimum values of each parameters such as loads, stresses and weight. Designer creates the model using optimized values for better products. In this paper, Computer Aided Engineering Design Optimization process is studied experimentally with CATIA Product Engineering Optimizer module and optimization algorithms within limitations are used. Benefits of the optimization procedure is also evaluated. Optimization process and benefits are presented in an example of I profile cantilever beam with a length of 2000 mm.

Słowa kluczowe

EN

CATIA; construction design; stress analysis; optimization

• Wydawca: Polskie Towarzystwo Promocji Wiedzy ; Lublin University of Technology
• Czasopismo: Applied Computer Science
• Rocznik: 2016
• Tom: Vol. 12, no 1
• Strony: 27--39
• Opis fizyczny: Bibliogr. 5 poz., fig., tab.

Twórcy

autor

İrsel G.

• Trakya University, Faculty of Engineering, Department of Mechanical Engineering, Edirne, Turkey

Bibliografia

• [1] Valakos I. M., Ntipteni M. S., Nikolos I. K.: Structural optimization of a central Impeller Using Different Evolution in Catia Environment. Operational Research An International Journal 7 (2), 2007, p. 185–182.
• [2] Rajam V., Murthy P. V. K., M. V. S. Krishna M., Rao G. M. P.: Design Analysis and Optimization of Piston using CATIA and ANSYS. Internaltional Journal of Innovative Research in Engineering & Science, 2 (1) 2013, ISSN 2319–5665.
• [3] Ferrira R., Hernandes J. A.: Structural Optimization of Reinforced Panels Using Catia V5. 19th International Congress of Mechanical Engineering, November 5–9, 2007, Brasillia.
• [4] Konig O., Wintermantel M.: CAD-based Evolutionary Design Optimization with CATIA V5. EVEN – Evolutionary Engineering AG, Zurich, Switzerland, Weimarer Optimierungs – und Stochastiktage 1.0, December 2004.
• [5] Irsel G., Altinbalik T., Çan Y.: Failure Investigation of the Disc Harrow Profiles and Redesigning by CATIA Analysis. Applied Mechanics and Materials 729, 2015, p. 181–186.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę