Maximum Load Carrying Capacity of a Cylinder with Open and Closed Ends Subjected to Internal and External Pressure Loads

• Autorzy: Bajkowski M. , Radomski M. , Telesiewicz T.
• Języki publikacji: EN

Abstrakty

EN

The extreme material effort of a cylinder subjected to internal and external pressure loads is studied for the Huber-Mises-Hencky yield criterion. The relation between the pressure loads on inner and outer shell walls of a cylinder is concerned. A cylinder with both ends open, and a compound cylinder with both ends closed are considered. For the case with both ends open the hoop and radial stress are considered. Additionally, for the cylinder with closed ends the axial stresses which balances the fluid pressure on the bottom walls is taken into account. The possibility of using the extreme load carrying capacity to design improved high pressure compound tanks has been discussed.

Słowa kluczowe

EN

mechanics; extremely high-pressure; cascade vessels

• Wydawca: Oficyna Wydawnicza Politechniki Warszawskiej
• Czasopismo: Machine Dynamics Research
• Rocznik: 2014
• Tom: Vol. 38, No. 3
• Strony: 71--79
• Opis fizyczny: Bibliogr. 14 poz., wykr.

Twórcy

autor

Bajkowski M.

• Institute of Mechanics and Printing Technology, Warsaw University of Technology

autor

Radomski M.

• Institute of Mechanics and Printing Technology, Warsaw University of Technology

autor

Telesiewicz T.

• Institute of Mechanics and Printing Technology, Warsaw University of Technology

Bibliografia

• 1. Timoshenko S., Goodier J. N., Theory of Elasticity, McGraw-Hill Book Co. Inc., New York, 1951.
• 2. Timoshenko S., Strength of Materials, Part II, D. Van Nostrand Co. Inc., New York, 1956.
• 3. Nowacki W., Teoria sprężystości, PWN, Warszawa, 1970.
• 4. Życzkowski M., Obciążenia złożone w teorii plastyczności, PWN, Warszawa, 1973.
• 5. Hearn E. J., Mechanics of Material I, An Introduction to the Mechanics of Elastic and Plastic Deformation of Solids and Structural Materials, Third edition, Butterworth-Heinemann, Oxford, 2000.
• 6. Nichols R. W., Pressure Vessel, Engineering Technology, Amsterdam, Elsev. Publ. Co. Lim., 1971.
• 7. Harvey J. F., Theory and Design of Pressure Vessels, Van Nostrand Reinhold Co. Inc., New York, 1991.
• 8. Moss D., Pressure Vessel Design Manual. 3rd Edition, Gulf Professional Publishing, 2004.
• 9. Eggers R. (ed.), Industrial High Pressure Applications, Processes, Equipment and Safety, Eggers R. (ed.), Wiley-VCH Verlag & Co. KGaA, Weinheim, 2012.
• 10. Lame M. G., Lecons sur la theorie mathematique de l'elasticite des corps solides, Mallet-Bachelier, Paris, 1852.
• 11. Ballhausen C., German Patent No. 1,142,341, 17th January, 1963.
• 12. Meissner M., Hydrostatic pressure device, U.S. Patent No. 3.224.042, Filed October 23. 1963, Patented December 21, 1965.
• 13. Berman I., Design and Analysis of Commercial Pressure Vessels to 500000 psi, J. Fluids Eng. 88 (2), pp. 500-506,1966, D01:10.1115/1.3645885.
• 14. Gerdeen J. C. and Fiorentini R. J. Analysis of Several High Pressure Container Design Concepts, Proc. of the Institution of Mechanical Engineers, 182: 11, 1967, DOI:10.1243/PIME CONF 1967 182 082 02.