Water and Food Dispenser for Dogs

• Autorzy: Filipek Przemysław

Identyfikatory

DOI

10.35784/jteme.3179

• Języki publikacji: EN

Abstrakty

EN

The subject of the article is the design and construction of a water and food dispenser for dogs. Its main goal is to present the design of the device adapted to both the requirements of the owners and the dogs themselves. The goals set for this project are to ensure its functionality in all weather conditions. The configuration methods described guarantee the versatility of the device. Design assumptions, a 3D model of the structure, electronics and a fragments of the control program are presented. The actual implementation of the dispenser, possibilities for its modification and, in conclusion, comments and conclusions are presented.

Słowa kluczowe

EN

water and food dispenser; 3D model of the structure; real execution; food feede

• Wydawca: Polskie Towarzystwo Promocji Wiedzy ; Wydawnictwo Politechniki Lubelskiej
• Czasopismo: Journal of Technology and Exploitation in Mechanical Engineering
• Rocznik: 2021
• Tom: Vol. 7, nr 1
• Strony: 1--7
• Opis fizyczny: Bibliogr. 5 poz., fig.

Twórcy

autor

Filipek Przemysław

• Lublin University of Technology, Faculty of Mechanical Engineering, Nadbystrzycka 36, 20-618 Lublin, Poland

• https://orcid.org/0000-0002-5471-3837

Bibliografia

• [1] M. Ceregrzyn, R. Lechowski and B. Barczewska, Podstawy żywienia psów i kotów. Wyd. Elsevier Urban & Partner, Gliwice 2021.
• [2] "Information about IP68 standard" [Online]. Available: https://www.jumo.pl [Accessed: 04-10-2021].
• [3] M. Evans, J. Noble and J. Hochenbaum, Arduino w akcji. Wyd. Helion, Gliwice 2014.
• [4] "Measurement procedure of ultrasonic sensor HC-SR04" [Online]. Available: https://botland.com.pl [Accessed: 06-10-2021].
• [5] E. Williams, Programowanie układów AVR dla praktyków. Wyd. Helion, Gliwice 2014.