Biomechanical analysis of individual all-ceramic abutments used in dental implantology

• Autorzy: Ziębowicz B. , Ziębowicz A. , Bączkowski B. , Kajzer W. , Kajzer A.

Identyfikatory

DOI

DOI: 10.1515/amm-2016-0223

• Języki publikacji: EN

Abstrakty

EN

Biomechanical analysis of individual all-ceramic abutments used in dental implantology The paper presents the results of finite element analysis and experimental testing under simulated physiological loading conditions on issues shaping the functional properties of individual all-ceramic abutments manufactured by CAD'CAM technology The conducted research have cognitive significance showing the all-ceramic abutment behavior, as a key element of the implantological system, under the action of cyclic load. The aim of this study was evaluation the fatigue behavior of yttria-stabilized zirconia abutment submitted to cyclic stresses, conducted in accordance with EN ISO 14801 applies to dynamic fatigue tests of endosseous dental implants.

Słowa kluczowe

EN

dental implant; abutment; zirconia ceramics; cyclic fatigue

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2016
• Tom: Vol. 61, iss. 3
• Strony: 1357--1362
• Opis fizyczny: Bibliogr. 27, rys., tab., wykr.

Twórcy

autor

Ziębowicz B.

• Institute of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology Gliwice, Poland

autor

Ziębowicz A.

• Department of Biomaterials and Medical Devices Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland

autor

Bączkowski B.

• Institute of Dentistry, Medical University of Warsaw, Warsaw, Poland

autor

Kajzer W.

• Department of Biomaterials and Medical Devices Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland

autor

Kajzer A.

• Department of Biomaterials and Medical Devices Engineering, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland

Bibliografia

• [1] A. N. Natali (Ed.), Dental Biomechanics, Taylor&Francis, London and New York 2004.
• [2] I. Denry, J. A. Holloway, Mat. 3, 351 (2010).
• [3] J.F. Shackelford. R.H. Doreinus (Eds.),Ceramic and Glass Materials. Structure, Properties and Processing. New York-London, Springer (2008).
• [4] J. R. Kelly, J. Evid. Base. Dent. Pract. 11, 203 (2011).
• [5] F. Beuer, J. Schweiger, M. Wichberger, Dent. Mater. 25 (1) 121 (2012).
• [6] P. C. Guess, E. A. Bonfante, N. Silva, P. G. Coelho, V. P. Thompson, Dent. Mater. 29, 307 (2013).
• [7] M. Takaba, S. Tanaka, Y. Ishiura, K. Baba, J. Prosthodont. 22 (5), 402 (2013).
• [8] S. Heintze, V. Rousson, Int. J. Prosth. 23 (6), 493 (2010).
• [9] A. Ziębowicz, B. Bączkowski, Numerical Analysis of the Implant-Abutment System, in E. Pietka, J. Kawa (Eds.), Information Technologies in Biomedicine, LNBI 7339, Springer (2012).
• [10] P. Gautam, A. Valiathan, Trends Biomater. Artiff. Organs, 20 (2), 122 (2007).
• [11] A. Ziębowicz, B. Ziębowicz, B. Bączkowski, Solid State Phenom. 227,447 (2015).
• [12] N. D. Adatia, S. C. Bayne, L.F. Cooper, J. Y Thompson, J Prosthodont. 18, 17 (2009).
• [13] Ch. S. Millen, R. L. Reuben, R. J. Ibbetson, Dent. Mater. 28, e250 (2012).
• [14] C. Larsson, Swed Dent. J. Suppl 213, 9 (2011).
• [15] W. N. Garine, P. D. Funkenbusch, C. Ercoli, J. Wodenscheck, W. C. Murphy, Int J Oral Maxillofac Implants 22, 928 (2007).
• [16] Ch. Woong-Rae, H. Yoon-Hyuk, P. Chan-Jin, Ch. Lee-Ra, J Adv Prosthodont. 7(4) 288 (2015).
• [17] A. Khraisat, O. Abu-Hammad, N. Dar-Odeh, A.M. Al-Kayed, Clin Implant Dent Relat Res. 6, 157 (2004).
• [18] EN ISO 14801. Dentistry - Implants - Dynamic fatigue test for endosseous dental implants (2007).
• [19] ISO 5832-2. Implants for surgery - Metallic materials. Unalloyed titanium (1999).
• [20] ASTMF 136-08. Standard specification for wrought Titanium-6Aluminium-4Vanadium ELI (Extra Low Interstitial) alloy for surgical implant applications (UNS R56401) (2008).
• [21] ISO 13356. Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) (2008).
• [22] J. Marciniak, J. Szewczenko, W. Walkę, M. Basiaga, M. Kiel, I. Manka, Biomechanical analysis of lumbar spine stabilization by means of transpedicular stabilizer in E. Piętka, J. Kawa (Eds.), Information Technologies in Biomedicine, Springer (2008).
• [23] G. J. Lavigne, S. Khoury, S. Abe, T. Yarnaguchi, K. Paphael, J Oral Rehabil. 7,476 (2008).
• [24] http://pdf.directindustry.com/pdf arcam'ti6al4v-titanium-alloy/19734-503503.html
• [25] A. Ziębowicz, A. Kajzer, W. Kajzer, J. Marciniak, Metatarsal Osteotomy Using Double-Threaded Screws - Biomechanical Analysis, in E. Piętka, J. Kawa (Eds.), Information Technologies in Biomedicine, Springer (2010).
• [26] P. P. Binon, M.J. McHugh, Int J Prosthodont. 9, 511 (1996).
• [27] K. J. Anusavice, Dent. Mater. 28, 102 (2012).

Uwagi

EN

This publication was co-financed within the framework of the statutory financial grant supported by the Faculty of Mechanical Engineering of the Silesian University of Technology in 2016.