Facility for performance testing of power transmission units

• Autorzy: Jaśkiewicz M. , Lisiecki J. , Lisiecki S. , Pokropiński E. , Więckowski D.
• Języki publikacji: EN

Abstrakty

EN

This paper describes the engineering design for a facility to test the performance of gearboxes and drive axles. Power transmission units are much more frequently tested on test rigs than in motor vehicles. The rig testing of such devices constitutes a very complex area because of the diversity of functions performed by individual components and their parts in the power transmission systems of motor vehicles and construction machinery. In the simulation tests carried out on simulation test rigs, the conditions of testing of individual units should match the expected conditions of operation for such units as much as possible. The test rigs used for this purpose are very complicated and expensive, but the results of rig tests are more reliable and accurate than they would be if other test methods were employed. The rig tests described here reflect the impact of anticipated service loads on the endurance of the unit under test.

Słowa kluczowe

EN

gearboxes; drive axles; rig tests; designing of test rigs; simulation test; power transmission

• Wydawca: Wydawnictwo Naukowe Akademii Morskiej w Szczecinie
• Czasopismo: Zeszyty Naukowe Akademii Morskiej w Szczecinie
• Rocznik: 2015
• Tom: nr 42 (114)
• Strony: 14--25
• Opis fizyczny: Bibliogr. 7 poz., rys., tab.

Twórcy

autor

Jaśkiewicz M.

• Kielce University of Technology 25-314 Kielce, Al. Tysiąclecia Państwa Polskiego 7

autor

Lisiecki J.

• Automotive Industry Institute 03-301 Warszawa, ul. Jagiellońska 55

autor

Lisiecki S.

• Automotive Industry Institute 03-301 Warszawa, ul. Jagiellońska 55

autor

Pokropiński E.

• Automotive Industry Institute 03-301 Warszawa, ul. Jagiellońska 55

autor

Więckowski D.

• Automotive Industry Institute 03-301 Warszawa, ul. Jagiellońska 55

Bibliografia

• 1. Industrial Standard (1976) BN-76/3612-05. Pojazdy samochodowe. Skrzynki przekładniowe. Ogólne wymagania i badania (Motor vehicles. Gearboxes. General requirements and testing).
• 2. LANZENDOERFER, J. (1977) Badania pojazdów samochodowych (Automotive vehicle testing). Warszawa: WKiŁ.
• 3. MINCHEJMER, A. (1962) Badanie samochodów (Motor vehicle testing). Warszawa: WNT.
• 4. ORZEŁOWSKI, S. (1995) Eksperymentalne badania samochodów i ich podzespołów (Experimental testing of motor vehicles and their component units). Warszawa: WNT.
• 5. PIMOT Technical Specifications (1996) WT/018/PIMOT/ 96. Mosty napędowe kompletne. Wymagania i badania w zakresie bezpieczeństwa (Drive axles, complete. Requirements and testing with respect to safety). Edition IV, of 1 Oct. 1996, PIMOT.
• 6. PIMOT Technical Specifications (1997) WT/097/PIMOT/ 97. Pojazdy samochodowe. Skrzynki przekładniowe. Wymagania i badania w zakresie bezpieczeństwa (Motor vehicles. Gearboxes. Requirements and testing with respect to safety). Edition I, of 17 Dec. 1997, PIMOT.
• 7. SITEK, K. & SYTA, S. (2011) Pojazdy samochodowe. Badania stanowiskowe i diagnostyka (Automotive vehicles. Rig testing and diagnostics). Warszawa: WKŁ.