Resorbable scaffolds modified with collagen type I or hydroxyapatite : in vitro studies on human mesenchymal stem cells

• Autorzy: Rumian Ł. , Wojak I. , Scharnweber D. , Pamuła E.
• Języki publikacji: EN

Abstrakty

EN

Poly(L-lactide-co-glycolide) (PLGA) scaffolds of pore size within the range of 250–320 μm were produced by solvent casting/ porogen leaching method. Afterwards, they were modified through adsorption of collagen type I and incubation in simulated body fluid (SBF) to allow deposition of hydroxyapatite (HAp). The wettability of the scaffolds was measured by sessile drop test. Scanning electron microscopy (SEM) evaluation and energy dispersive X-ray analysis (EDX) were also performed. SEM evaluation and EDX analysis depicted the presence of HAp deposits and a collagen layer on the pore walls on the surface and in the bulk of the scaffolds. Wettability and water droplets penetration time within the scaffolds decreased considerably after applying modifications. Human mesenchymal stem cells (hMSC) were cultured on the scaffolds for 28 days and cell morphology, proliferation and differentiation as well as calcium deposition were evaluated. Lactate dehydrogenase (LDH) activity results revealed that cells cultured on tissue culture polystyrene (TCPS) exhibited high proliferation capacity. Cell growth on the scaffolds was slower in comparison to TCPS and did not depend on modification applied. On the other hand, osteogenic differentiation of hMSC as confirmed by alkaline phosphatase (ALP) activity and mineralization results was enhanced on the scaffolds modified with hydroxyapatite and collagen.

Słowa kluczowe

EN

collagen type I; human mesenchymal stem cells; hydroxyapatite; poly(L-lactide-co-glycolide); scaffolds

PL

kolagen; hydroksyapatyt; mezenchyma

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Acta of Bioengineering and Biomechanics
• Rocznik: 2013
• Tom: Vol. 15, no. 1
• Strony: 61--67
• Opis fizyczny: Bibliogr. 16 poz., rys., wykr.

Twórcy

autor

Rumian Ł.

• AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Department of Biomaterials, Kraków, Poland

autor

Wojak I.

• AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Department of Biomaterials, Kraków, Poland

autor

Scharnweber D.

• Technische Universität Dresden, Institute of Materials Science, Max Bergmann Center of Biomaterials, Dresden, Germany

autor

Pamuła E.

• AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Department of Biomaterials, Kraków, Poland

Bibliografia

• [1] HOOTMAN J.M., MURPHY L.B., Prevalence of Doctor-Diagnosed Arthritis and Arthritis-Attributable Activity Limitation – United States, 2007–2009, Morbidity and Mortality Weekly Report, 2010, 59(39), 1261–1265.
• [2] LIEBERMAN J.R., FRIEDLAENDER G.E., Bone Regeneration and Repair: Biology and Clinical Applications, 1st ed., USA: Humana Press, 2005, 1–20.
• [3] WILLIAMS D.F., On the mechanism of biocompatibility, Biomaterials, 2008, 29, 2941–2953.
• [4] IKADA Y., Tissue Engineering: Fundamentals and Applications, Interface Science and Technology, Vol. 8, 1st ed., Amsterdam, Elsevier, 2006, 1–3.
• [5] WNEK G.E., BOWLING G.L., Encyclopaedia of Biomaterials and Biomedical Engineering, Vol. 1, 2nd ed., USA: Informa Healthcare, 2008, 169–178, 195–206.
• [6] VAN DER SMISSEN A., HINTZE V., SCHARNWEBER D., MOELLER S.T., SCHNABELRAUCH M., MAJOK A., SIMON J.C., ANDEREGG U., Artificial extracellular matrices composed of collagen I and sulfated glycosaminoglycans provide a growth promoting substrate for human dermal fibroblasts, Biomaterials, 2011, 32, 8938–8946.
• [7] MEYER U., MEYER T., HANDSCHEL J., Fundamentals of Tissue Engineering and Regenerative Medicine, 1st ed., Berlin, Springer, 2009, 469–484.
• [8] DOBRZYŃSKI P., KASPERCZYK J., JANECZEK H., BERO M., Synthesis of biodegradable copolymers with the use of low toxic zirconium compounds. 1. Copolymerization of glycolide with L-lactide initiated by Zr(Acac)4, Macromolecules, 2001, 34, 5090–5098.
• [9] KOKUBO T., KUSHITANI H., SAKKA S., KITSUGI T., YAMAMURO T., Solutions able to reproduce in vivo surface-structure changes in bioactive glass-ceramic A-W, J. Biomed. Mater. Res., 1990, 24(6), 721–734.
• [10] REN T., REN J. et al., The bone formation in vitro and mandibular defect repair using PLGA porous scaffolds, J. Biomed. Mater. Res. A, 2005, 74(4), 562–569.
• [11] DOUGLAS T., PAMULA E., HAUK D., WILTFANG J., SIVANANTHAN S., SHERRY E., WARNKE P.H., Porous polymer/ hydroxyapatite scaffolds: characterization and biocompatibility investigation, J. Mater. Sci.-Mater. M, 2009, 20, 1909–1915.
• [12] YUAN H., KURASHINA K., JIA X., PAN K., A preliminary study on osteoinduction of two kinds of calcium phosphate ceramics, Biomaterials, 1999, 20, 1799–1806.
• [13] PAMULA E., BACAKOVA L., FILOVA E., BUCZYŃSKA J., DOBRZYŃSKI P., NOSKOVA L., GRAUSOVA L., The influence of pore size on colonization of poly(L-lactideglycolide) scaffolds with human osteoblast-like MG 63 cells in vitro, J. Mater. Sci.-Mater. M, 2008, 19(1), 425–435.
• [14] ADAMCZAK M., ŚCISLOWSKA-CZARNECKA A., GENET M.J., DUPONT-GILLAIN C.C., PAMULA E., Surface characterization, collagen adsorption and cell behaviour on poly(llactide-co-glycolide), Acta Bioeng. Biomech., 2011, 13(3),63–75.
• [15] ISHAUG S.L., CRANE G.M., MILLER M.J., YASKO A.W., YASZEMSKI M.J., MIKOS A.G., Bone formation by threedimensional stromal osteoblast culture in biodegradable polymer scaffolds, J. Biomed. Mater. Res., 1997, 36(1), 17–28.
• [16] KIM S.S., PARK M.S., GWAK S.J., CHOI C.Y., KIM B.S., Accelerated bonelike apatite growth on porous polymer/ ceramic composite scaffolds in vitro, Tissue Eng., 2006, 12(10), 2997–3006.