Power loss in a combustion engine of a prototype vehicle

• Autorzy: Petróci J. , Mantič M. , Sloboda O.
• Języki publikacji: EN

Abstrakty

EN

The paper deals with the analysis of power loss involved in an experimental single-cylinder internal combustion engine during its operation. The experimental engine has been developed and built entirely at the University for the purposes of Shell Eco-marathon. A series of experimental measurements was taken to discover the reasons for the issues we had encountered by obtaining output power characteristics and the value of compression pressure regularly at specific intervals. The data we obtained served to diagnose faults and to propose solutions for their elimination.

Słowa kluczowe

EN

prototype; combustion engine; power-torque measurement; engine diagnostics; compression pressure

PL

silnik spalinowy; prototyp; energia; moc; pomiar; diagnostyka silnika; ciśnienie sprężania

• Wydawca: Polskie Towarzystwo Diagnostyki Technicznej
• Czasopismo: Diagnostyka
• Rocznik: 2017
• Tom: Vol. 18, No. 2
• Strony: 59--64
• Opis fizyczny: Bibliogr. 18 poz., rys., wykr., zdj.

Twórcy

autor

Petróci J.

• Technical University of Košice, Faculty of Mechanical Engineering Letná 9, 042 00 Košice, Slovak Republic

autor

Mantič M.

• Technical University of Košice, Faculty of Mechanical Engineering Letná 9, 042 00 Košice, Slovak Republic

autor

Sloboda O.

• Technical University of Košice, Faculty of Mechanical Engineering Letná 9, 042 00 Košice, Slovak Republic

Bibliografia

• 1. Lee B, Rizzoni G, Guezennec Y, Soliman A, Cavalletti M, Waters J. Engine Control Using Torque Estimation. SAE Tech Pap 2001:SAE 2001- 01-0995. doi:10.4271/2001-01-0995.
• 2. Martyr A. J, Plint M. A. Engine Testing. 2012. doi:10.1016/B978-0-08-096949-7.00012-1.
• 3. Zhen X, Wang Y, Xu S, Zhu Y, Tao C, Xu T, et al. The engine knock analysis - An overview. Appl Energy 2012;92:628-636. doi:10.1016/j.apenergy.2011.11.079.
• 4. Blau PJ. Elevated-temperature tribology of metallic materials. Tribol Int 2010;43:1203-1208. doi:10.1016/j.triboint.2010.01.003.
• 5. Priest M, Taylor CM. Automobile engine tribologyapproaching the surface. Wear 2000;241:193–203. doi:http://dx.doi.org/10.1016/S0043- 1648(00)00375-6.
• 6. Adams DR. 8 - Tribological considerations in internal combustion engines. 2010. doi:http://dx.doi.org/10.1533/9781845699932.2.251.
• 7. Tung SC, McMillan ML. Automotive tribology overview of current advances and challenges for the future. Tribol Int 2004;37:517-536. doi:10.1016/j.triboint.2004.01.013.
• 8. Wong VW, Tung SC. Overview of automotive engine friction and reduction trends. Effects of surface, material, and lubricant-additive technologies. Friction 2016;4. doi:10.1007/s40544- 016-0107-9.
• 9. Rasheed AK, Khalid M, Javeed A, Rashmi W, Gupta TCSM, Chan A. Heat transfer and tribological performance of graphene nanolubricant in an internal combustion engine. Tribol Int 2016;103:504-15. doi:10.1016/j.triboint.2016.08.007.
• 10. Lubas J. Practical application of boron-modified sliding pairs in I.C. engine. Tribol Int 2010;43:2046- 50. doi:10.1016/j.triboint.2010.05.008.
• 11. Puchalski A. Application of statistical residuals in vibrodiagnostics of vehicles. J Vibroengineering, 2014;16:3115-3121.
• 12. Kostyukov VN, Naumenko AP. Standardization in the sphere of vibrodiagnostic monitoring of piston compressors. Procedia Eng., 2015:113:70-80. doi:10.1016/j.proeng.2015.07.290.
• 13. Grega R. et al. The chances for reduction of vibrations in mechanical system with low-emission ships combustion engines. 2015. In: International Journal of Maritime Engineering. 2015;157:235-240.
• 14. Czech P. Identification of Leakages in the Inlet System of an Internal Combustion Engine with the Use of Wigner-Ville Transform and RBF Neural Networks. Conference: 12th International Conference on Transport Systems Telematics Location: Katowice Ustron, Poland, 2012.
• 15. Sloboda A, Bugár T, Sloboda O, Ďurovský F. Experimentálne vozidlá. Vienala 2012.
• 16. Wierzbicki S, Śmieja M, Grzeszczyk R. Zintegrowane sterowanie stanowiskiem badawczym silników o ZS w środowisku fast prototyping. Combustion engines, 2013;52(3): 536-541.
• 17. Sloboda A, Bugár T, Tomková M, Sloboda A ml., Piľa J, Tkáč Z. Konštrukcia automobilov I. Piestové spaľovacie motory. TU Košice 2006.
• 18. Bugár T, Laboš J, Sloboda A. Pevnostná kontrola hlavy valca z pohľadu jej spoľahlivosti a bezpečnosti. 2005. In: Kvalita a spoľahlivosť technických systémov. Nitra, SPU, p. 203-205.