Measurement techniques used for analysis of the geometric structure of machined surfaces

• Autorzy: Niemczewska-Wójcik M. , Mathia T. , Wójcik A.

Identyfikatory

DOI

10.2478/mper-2014-0014

• Języki publikacji: EN

Abstrakty

EN

The quality of machined surfaces, resulting from the manufacturing process and conditioning their functionality, is determined by the surface geometric structure (SGS). There is a close relationship between surface properties, shape, qualitative imagining of the surface topography, technique and technology employed for machining purposes [1, 2]. If a given surface is to have practical applications in engineering, the correct technological process needs to be chosen. In the paper, various techniques used for measuring the surface geometric structure were described. The results of the study, which were obtained from different measuring devices like Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM) and Optical Interferometer (WLI), were presented. Optical Microscopy (OM) was shown as a helpful device to analyse some aspects of surface topography. Each measuring technique provided different, yet complementary data on the topography of the machined surfaces. Owing to this, a full characterization of the geometric surface structure of the machined surfaces was enabled, including surface properties resulting from the applied technological process. Based on the measurements made, the characteristics of chosen devices (measurement techniques) were defined with an indication of how they can be applied to the analysis of the surface geometric structure (SGS). The devices which are considered to give the best view of examined surfaces and allow a thorough analysis of their irregularities were then indicated.

Słowa kluczowe

EN

surface metrology; measurement techniques; SGS analysis

• Wydawca: Production Engineering Committee of the Polish Academy of Sciences ; Polish Association for Production Management
• Czasopismo: Management and Production Engineering Review
• Rocznik: 2014
• Tom: Vol. 5, No. 2
• Strony: 27--32
• Opis fizyczny: Bibliogr. 16 poz., rys., tab., wykr., zdj.

Twórcy

autor

Niemczewska-Wójcik M.

• Cracow University of Technology, Institute of Production Engineering, Poland

autor

Mathia T.

• École Centrale de Lyon, Laboratoire de Tribologie et Dynamique des Systèmes, France

autor

Wójcik A.

• University of Agriculture in Cracow, Department of Mechanical Engineering and Agrophysics, Poland

Bibliografia

• [1] De Chiffre L., Lonardo P., Trumpold H., Lucca D.A., Goch G., Brown C.A., Raja J., Hansen H.N., Quantitative characterisation of surface texture, CIRP Ann., 49, 2, 635-652, 2000.
• [2] Davim P.J. (Ed.), Surface integrity in machining, Springer, London, 2010.
• [3] Senveter J., Klancnik S., Balic J., Cus Franc, Prediction of surface roughness using a feed-forward neural network, Management and Production Engineering Review, 1, 2, 47-55, 2010.
• [4] Pawlus P., Surface Topography - Measurement, Analysis, Influence, Publishing House of Rzeszow University of Technology, Rzeszow, 2006.
• [5] Stout K.J., Blunt L., Three Dimensional Surface Topography, Penton Press, London, 2000.
• [6] Mathia T., Zahouani H., Rousseau J., Le Bosse J.C., Functional significance of different techniques for surface morphology measurements, Int. J. Mach. Tools Manufact., 35, 2, 195-202, 1995.
• [7] Mathia T., Pawlus P., Wieczorowski M., Recent trends in surface metrology, Wear, 271, 3-4, 494-508, 2011.
• [8] Wieczorowski M., Surface topography analysis, Publishing House of Poznan University of Technology, Poznan, 2009.
• [9] Thomas T.R., Rough Surfaces, Imperial Collage Press, London, 1999.
• [10] Leach R. (Ed.), Characterisation of areal surface texture, Springer, 2013.
• [11] Łukianowicz Cz., Principles of surface roughness measurements by light scattering methods, Publishing House of Koszalin University of Technology, Koszalin, 2001.
• [12] Czichos H., Saito T., Smith L. (Eds.), Springer handbook of materials measurement methods, Springer, 2006.
• [13] Padron I. (Ed.), Recent interferometry applications in topography and astronomy, InTech, Croatia, 2012.
• [14] Niemczewska-Wojcik M., Gawlik J., Sładek J., The measurement and analysis of surface geometric structure of ceramic femoral heads, Scanning, 36, 1, 105-114, 2014.
• [15] Niemczewska-Wojcik M., Mańkowska-Snopczyńska A., Piekoszewski W., The investigation of wear tracks with the use of noncontact measurement methods, Archives of Civil and Mechanical Engineering, 13, 2, 158-167, 2013.
• [16] Niemczewska-Wojcik M., The microscopic analysis of material‘s surfaces for use in medicine, Tribology - Friction, Wear, Lubrication, 3, 205-213, 2008.