The Influence of Technological Parameters of X70 Stainless Steel Ladle Refining on the Residual Content of Non-Metallic Inclusions

• Autorzy: Babanin A. , Babanina O. , Bilousov V. , Komarov B. , Pashchuk D. , Shalapko J.

Identyfikatory

DOI

10.1515/afe-2015-0049

• Języki publikacji: EN

Abstrakty

EN

It is demonstrated that during secondary refining at the ladle furnace the carbon content of steel and the residence time of the metal in the ladle exert a significant impact on the residual content of non-metallic inclusions (NMI) in steel. Mathematical calculations showed that the dynamic forces have minor effect on the motion of small sized NMI, making it difficult to penetrate deep into the slag.

Słowa kluczowe

EN

non-metallic inclusions; secondary refining; ladle furnace; tundish ladle

PL

wtrącenia niemetaliczne; rafinacja wtórna; piec kadziowy

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2015
• Tom: Vol. 15, iss. 3
• Strony: 5--10
• Opis fizyczny: Bibliogr. 10 poz., tab., wykr.

Twórcy

autor

Babanin A.

• Donbas National Academy of Civil Engineering and Architecture, Donetsk, Ukraine

autor

Babanina O.

• Donetsk National University, Ukraine

autor

Bilousov V.

• Donetsk National University, Ukraine

autor

Komarov B.

• Donetsk National University, Ukraine

autor

Pashchuk D.

• PJSC “Azovstal Iron & Steel Works”, Mariupol, Ukraine

autor

Shalapko J.

• University of Technology and Life Sciences, Bydgoszcz, Poland

Bibliografia

• [1] Stoljarov, V.I., Pyshmintsev, I.J., Struin, I.O. & etc. (2010). Investigation of operational characteristics gas pipes for working pressures up to 11.8 MPa. Steel. 1, 73-76.
• [2] Babanine, A.J., Dyudkin, D.A., Oxalis, V.V. and others (2011). Improving the quality of structural steel strength category X70 through process optimization ladle treatment of high-level elements. In Innovative technologies ladle metallurgy of iron and steel. Coll. Scien. tr. Conf., 22-26 October 2011 (pp.131-136). Donetsk P.
• [3] Minin, A.S. & Chernyshev, S.G. (2011). Pipes strength X80. Neftegazopromyshlenost. 6, 47-50.
• [4] Shakhpazov, E.H., Zaitsev, A.I., Nemtinov, A.A. et al. (2007). The modern direction of the ladle metallurgy and problems of non-metallic inclusions in steel. Metall. 1, 3-13.
• [5] Zaitsev, A.I., Rodionov, I.G., Nemtinov, A.A. & etc. (2007). Control of non-metallic inclusions - the key problem of modern metallurgy and materials science steel and iron alloys. Problems ferrous metallurgy and materials science. 1, 11-23.
• [6] Hulk, K. & Aleksandrov, S. (2006). Prospective pipe steel pipelines. Metallurg. 3. 52-55.
• [7] Dyudkin, D.A. (1998). Features integrated effects of calcium on the properties of the liquid and solid steel. Steel. 1, 20-25.
• [8] Bilousov, V.V. (2009). Solidification of metals and metal composites. In Bilousov V.V., Nedopekin F.V., Hrychikov V.E., Leibenzon V.A. and others (Eds.), Textbook (pp.409). Kiev: Naukova Dumka.
• [9] Bilousov, V.V., Komarov, V.F. & Kulikov, E.I. (2007). Numerical simulation of mixing processes by blowing bath unit "ladle furnace". Mathematical modeling. 2(17), 61-63.
• [10] Beilousov, V.V. (2013). The role of turbulence in the process of continuous refining of steel in the tundish bath caster CCM. In Beilousov V.V., Gonchar B.S., Komarov V.F., Nogovitsin A.V. (Eds.), Modern refractories: resource conservation and use in metallurgical technologies (pp. 157-161). Donetsk: Noulidzh.: Sat. Scien.