Development of pressure die casting and permanent-mould casting technologies

• Autorzy: Ragan E.
• Języki publikacji: EN

Abstrakty

EN

Contribution deals with main directions of pressure die casting and permanent - mould casting. Research of mentioned technologies are made. Results of research are transferred into industrial practice. They are research of metal properties in interval of crystallization especially viscosity of liquid alloys, research of filtration, simulation of die filling and liquid metals solidifying. research of pressure die casting special methods, die materials, research of cooling system of permanent - moulds, thermograph y and radioscopy of permanent - moulds.

Słowa kluczowe

EN

pressure die casting; permanent mould casting; aluminium alloys

PL

odlewnictwo ciśnieniowe; formy odlewnicze; stopy aluminium

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archiwum Odlewnictwa
• Rocznik: 2004
• Tom: R. 4, nr 11/2
• Strony: 137--140
• Opis fizyczny: Bibliogr. 19 poz.

Twórcy

autor

Ragan E.

• Faculty of Manufacturing Technologies, Technical University in Košice with residence in Prešov, Slovakia

Bibliografia

• [1] Jahresübersicht Druckguss (Annual review, pressure die casting), Giesserei 85 (1998). Nr. 3-10, März. s. 82
• [2] Ragan, E.: Proces liatia pod tlakom (Pressure die casting process). FVT TU v Košciach so sĭdlom v Prešove. Prešov 1997.
• [3] Ragan, E.: Liatie horčĭkových zliatin pod tlakom (Pressure die casting of magnesium alloys). Zbornik z konferencie "Novinky vo výrobe zliatin a odliatkov z neželezných kovov”, Nimnica, april 1998, s. 118-122.
• [4] Diecasting - Investing for the future 15th International Pressure Diecasting Conferencc 1990. Montreux. Ch. 21-22, May 1996. Vortr. 22.
• [5] Bechný, L., Vrábel. S.: Vplyv filtrácie na zlievárenské, mechanické a niektoré technologické vlastnosti grafických zliatin (Influence of filtration on casting, mechanical and some technological properties of graphitic alloys). Zbonik z odborného seminára “Filtrácia tekutých kovov”, Terchová-Vrátna, april 1997, s. 49-59.
• [6] 3. Int. Permanent Mold Casting of Aluminum Conf. St. Louis. USA. American Foundrymen's Society, Des Plaines, USA (1995), Vortr. 16.
• [7] Metalcasting-Progressing into the 21st Century. Proceedings of the 62 and World Foundry Congress, Philadelphia, USA, April 23-26, 1996, s. 305-317. Vortr. 25.
• [8] Giesserei 84 (1997) Nr. 4, s. 40-42.
• [9] Diecasting Engineer 40 (1996) 4, s.73.
• [10] Przegląd Odlewnictwa 47 (1997) Nr. 4, s. 99-102.
• [11] Aalener Giessereisymposium (1996), Vortr. 5.
• [12] Giesserei 84 (1997). Nr. 22, s.17-20.
• [13] Transactions of the American Foundrymen's Society 104 (1996), s. 251-262.
• [14] Metalcasting-Progressing into the 21st century. Proc. of the 62nd World Foundry Congress. Philadelphia USA. 23-26, April 1996. American Foundrymen's Society, Des Plaines. USA. (1996), s. 278-285.
• [15] Transactions of the Americam Foundrymen's Society 104 (1996). s. 1039-1043.
• [16] Metallurgia Italiana 89 (1997), Nr. 6, s. 17-23.
• [17] Giesserci-Praxis, Nr. 5 (1997). s. 108-114.
• [18] Pavlenko, S.: Príspevok k torznému kmitaniu závitovkového prevodu (contribution to torsion vibration of a worm gear), Strojnícky časopis, Volume 38, iss. 1. Veda SAV, 1987. p. 37-49.
• [19] Marcinčin, J.N., Pavlenko, S., Horbaj, P.: CA systémy a ich aplikácia v oblasti energetických potrubných sústav (CA systems and their application in area of energetic piping systems). Acta Mechanica Slovaca, vol. 3. Strojnícka fakulta TU v Košiciach, Košice 2000, iss. 3. p. 93-98.