PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The Influence of Grain Size on the Mechanical Damping Behavior of Aluminum

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
An understanding of the fundamental correlation between grain size and material damping is crucial for the successful development of structural components offering high strength and good mechanical energy absorption. With this regard, we fabricated aluminum sheets with grain sizes ranging from tens of microns down to 60 nm and investigated their tensile properties and mechanical damping behavior. An obvious transition of the damping mechanism was observed at nanoscale grain sizes, and the underlying causes by grain boundaries were interpreted.
Słowa kluczowe
Twórcy
autor
  • Kookmin University, Department of Materials Science and Engineering, Jeongneung-Ro 77, Seongbuk-Gu, Seoul, 02707, Korea
  • Yonsei University, Department of Materials Science and Engineering, Seoul, 03722, Korea
  • Yonsei University, Department of Materials Science and Engineering, Seoul, 03722, Korea
autor
  • Yonsei University, Department of Materials Science and Engineering, Seoul, 03722, Korea
autor
  • Kookmin University, Department of Materials Science and Engineering, Jeongneung-Ro 77, Seongbuk-Gu, Seoul, 02707, Korea
Bibliografia
  • [1] J.-P. Immarigeon, R. T. Holt, A. K. Koul, L. Zhao, W. Wallace, J. C. Beddoes, Mater. Charact. 35, 41-67 (1995).
  • [2] M. Schimek, A. Springer, S. Kaierle, D. Kracht, V. Wesling, Phys. Procedia 39, 43-50 (2012).
  • [3] C. Y. Xie, R. Schaller, C. Jaquerod, Mater. Sci. Eng. A 252, 78-84 (1998).
  • [4] L. Liao, X. Zhang, H. Wang, Mater. Lett. 59, 2702-2705 (2005).
  • [5] G.-C. Li, Y. Ma, X.-L. He, W. Li, P.-Y. Li, Trans. Nonferrous Met. Soc. China 22, 1112-1117 (2012).
  • [6] Y. K. Favstov, Y. N. Shul’ga, A. G. Rakhshtadt, Metallurgia, Moscow, 272 (1980) (in Russian).
  • [7] R. Casati, M. Vedani, A. Tuissi, E. Villa, D. Dellasega, X. Wei, K. Xia, Microstructure and Damping Properties of Ultra Fine Grained Al Wires Reinforced by Al2O3 Nanoparticles, in: J. Grandfield (Ed.), Light Metals 2014, Springer International Publishing (2016).
  • [8] S. Salamone, B. Givens, K. Kremer, M. Aghajanian, Effect of Particle Loading on Properties, Damping, and Wear of AL/SiC MMCs, in: D. Singh (Ed.), Mechanical Properties Performance of Engineering Ceramics and Composites X, The American Ceramic Society (2015).
  • [9] G.-L. Fan, Z.-Q. Li, D. Zhang, Trans. Nonferrous Met. Soc. China 22, 2512-2516 (2012).
  • [10] Y. Zhang, N. Ma, H. Wang, Y. Le, S. Li, Scripta Mater. 53, 1171-1174 (2005).
  • [11] A. I. Ustinov, S. S. Polishchuk, V. S. Skorodzievskii, V. V. Bliznuk, Surf. Coat. Technol. 202, 5812-5816 (2008).
  • [12] Y. Zhang, N. Ma, H. Wang, X. Li, Mater. Des. 29, 706-708 (2008).
  • [13] A. Granato, K. Lücke, J. Appl. Phys. 27, 583-593 (1956).
  • [14] H. P. Klug, L. E. Alexander, X-ray diffraction procedures, New York 1954.
  • [15] H. J. Choi, J. H. Shin, D. H. Bae, Compos. Sci. Technol. 71, 1699-1705 (2011).
  • [16] Q. Wei, D. Jia, K. T. Ramesh, E. Ma, Appl. Phys. Lett. 81, 1240-1242 (2002).
  • [17] M. A. Meyers, A. Mishra, D. J. Benson, Prog. Mater. Sci. 51, 427-556 (2006).
  • [18] T. N. Baker, N. J. Petch, Yield, flow and fracture of polycrystals, London 1983.
  • [19] H. J. Choi, S. W. Lee, J. S. Park, D. H. Bae, Mater. Trans. 50, 640-643 (2009).
  • [20] J. Zhang, R. J. Perez, C. R. Wong, E. J. Lavernia, Mater. Sci. Eng. R-Rep. 13, 325-389 (1994).
  • [21] P. Lu, H. P. Lee, C. Lu, H. B. Chen, Int. J. Mech. Sci. 50, 501-512 (2008).
  • [22] M. Oogane, T. Wakitani, S. Yakata, R. Yilgin, Y. Ando, A. Sakuma, T. Miyazaki, Jpn. J. Appl. Phys., Part 1 45, 3889-3891 (2006).
  • [23] S. Adhikari, J. Woodhouse, J. Sound Vib. 243, 43-61 (2001).
  • [24] J. Zhang, R. J. Perez, E. J. Lavernia, J. Mater. Sci. 28, 2395-2404 (1993).
  • [25] S. Kustov, S. Golyandin, K. Sapozhnikov, J. Pons, E. Cesari, J. V. Humbeeck, Acta Mater. 54, 2075-2085 (2006).
  • [26] W. Johnson, J. Alloys Compd. 310, 423-426 (2000).
  • [27] T. S. Kê, Phys. Rev. 72, 41-46 (1947).
  • [28] Y. Koizumi, M. Ueyama, N. Tsuji, Y. Minamino, K. Ota, J. Alloys Compd. 355, 47-51 (2003).
  • [29] R. R. Mulyukov, A. I. Pshenichnyuk, J. Alloy. Compd. 355, 26-30 (2003).
  • [30] J. Gu, X. Zhang, M. Gu, M. Gu, X. Wang, J. Alloy. Compd. 372, 304-308 (2004).
Uwagi
EN
1. This work was supported by the National Research Foundation of Korea (NRF) Grant funded by the Korean Government (No. Grant Number-2015R1A5A7037615, 2016M2B2A9A02943809 and 2017M1A3A3A02015639).
PL
2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-f1f2874b-7d2f-435e-8ba7-156fd75b9c7c
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.