Trends in rapid prototyping and smart engineering for central europe based on the 3DCentral project

• Autorzy: Karpisz Dariusz , Kiełbus Anna , Brunner Johannes

Identyfikatory

DOI

10.2478/cqpi-2019-0049

• Języki publikacji: EN

Abstrakty

EN

The article presents the main trends in Rapid Prototyping and Smart Engineering. The potential of Central European regions was demonstrated and characterized on the mentioned basis of which e-learning trainings were developed. Based on the implemented international project "3DCentral – Catalyzing Smart Engineering and Rapid Prototyping", selected conclusions from the implementation of the training program are presented.

Słowa kluczowe

EN

rapid prototyping; smart engineering; 3DCentral; Industry 4.0

PL

szybkie prototypowanie; inteligentna inżynieria; 3DCentral; przemysł 4.0

• Wydawca: De Gruyter
• Czasopismo: Quality Production Improvement - QPI
• Rocznik: 2019
• Tom: Vol. 1, Iss. 1
• Strony: 363--370
• Opis fizyczny: Bibliogr. 26 poz., rys., tab.

Twórcy

autor

Karpisz Dariusz

• Cracow University of Technology, Faculty of Mechanical Engineering, Jana Pawla II 37, Cracow, Poland

autor

Kiełbus Anna

• Cracow University of Technology, Faculty of Mechanical Engineering, Jana Pawla II 37, Cracow, Poland

autor

Brunner Johannes

• IDM Südtirol – Alto Adige, Via Siemens 19, I-39100 Bolzano, Italy

Bibliografia

• 1.Deliverable D.T1.1.1, 2018. Report on knowledge, transfer and case management for the project core group and their stakeholders. 3DCentral project documentation.
• 2.Deliverable D.T2.3.1, 2016. Curriculum & recruiting scheme for KITTS - Knowledge Innovation Technology Transfer Scouts network. 3DCentral project documentation.
• 3.Deliverable D.T2.3.3, 2018. Report On KITTS Network. 3DCentral project documentation.
• 4.Deliverable D.T2.3.4, 2018. Report on CE Brain Base. 3DCentral project documentation.
• 5.Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018a. Simulation of Cavitation Erosion in a Hydraulic Valve. Materials Research Proceedings, 5, 1-6. DOI: 10.21741/9781945291814-1
• 6.Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018b. Simulation of Particle Erosion in a Hydraulic Valve. Materials Research Proceedings, 5, 17-24. DOI: 10.21741/9781945291814-4
• 7.Fabis-Domagala, J., Filo, G., Momeni, H., Domagala, M., 2018. Instruments of identification of hydraulic components potential failures. MATEC Web Conf., 183, art. 03008. DOI: 10.1051/matecconf/201818303008
• 8.Filo, G., Lisowski, E., Domagala, M., Fabis-Domagala, J., Momeni, H., 2018. Modelling of pressure pulse generator with the use of a flow control valve and a fuzzy logic controller. AIP Conf. Proc., 2029, art. 020015. DOI: 10.1063/1.5066477
• 9.Gadek-Moszczak, A., Radek, N., Wronski, S., Tarasiuk, J., 2014. Application the 3D image analysis techniques for assessment the quality of material surface layer before and after laser treatment. Adv. Mat. Res. Switz., 874, 133-138. DOI: 10.4028/www.scientific.net/AMR.874.133
• 10.Goffin K., Mitchell R., 2016. Innovation Management: Efective strategy & implementation. Macmillan Education, London.
• 11.Jashapara, A., 2010. Knowledge Management. Pearson Education Limited, London.
• 12.Kozien, E., 2017. Identification of stage phase growth in the checklist method using different statistical parameters. 20th Int. Sci. Conf. Economic and Social Development, Prague, Varazdin, 538-545. Kozien, E.,
• 13.Kozien, A., 2017. Commercialization of scientific research results and transfer knowledge and technologies to economy as determinants of development of universities and enterprises in Poland - legal and economic perspective. 26th Int. Sci. Conf. Economic and Social Development, Zagreb, Varazdin, 326-335.
• 14.Lipinski, T., 2010. The structure and mechanical properties of Al-7%SiMg alloy treated with a homogeneous modifier. Solid State Phenomena, 163, 183-186. DOI: 10.4028/www.scientific.net/SSP.163.183
• 15.Osocha, P., 2018. Calculation of Residual Life for P91 Material Based on Creep Rate and Time to Rupture. Materials Research Proceedings, 5, 177-182. DOI: 10.21741/9781945291814-31
• 16.Ouma-Onyango, R., 2018. Information resources and technology transfer management in developing countries. Routledge Library Editions.
• 17.Pacana, J., Pacana, A., 2018. Analysis of Possibilities of Using Polymeric Materials for Testing Prototypes of Harmonic Drive. Materials Research Proceedings, 5, 61-66. DOI: 10.21741/9781945291814-11
• 18.Pasieczynski, L., Radek, N., Klonica, M., Kaminski, J., Swiderski, J., 2018. Properties of BO100-AGR Clearcoat Anti-Graffiti Coating Systems used in the Railway Industry. Materials Research Proceedings, 5, 225-230. DOI: 10.21741/9781945291814-40
• 19.Pietraszek, J., Kolomycki, M., Szczotok, A., Dwornicka, R., 2016. The fuzzy approach to assessment of ANOVA results. ICCCI 2016: Conf. on Comp. Collective Intell. Springer, 260-268. DOI: 10.1007/978-3-319-45243-2_24
• 20.Pliszka, I., Radek, N., Gadek-Moszczak, A., Fabian, P., Paraska, O., 2018. Surface Improvement by WC-Cu Electro-Spark Coatings with Laser Modification. Materials Research Proceedings, 5, 237-242. DOI: 10.21741/9781945291814-42
• 21.Radek, N., Pietraszek, J., Szczotok, A., 2018a. Microstructure and Tribological Properties of ESD Coatings after Laser Processing. Materials Research Proceedings, 5, 206-209. DOI: 10.21741/9781945291814-36
• 22.Radek, N., Szczotok, A., Gadek-Moszczak, A., Dwornicka, R., Broncek, J., Pietraszek, J., 2018b. The impact of laser processing parameters on the properties of electrospark deposited coatings. Arch. Metall. Mater., 63, 809-816. DOI: 10.24425/122407
• 23.Skrzypczak-Pietraszek, E., Reiss, K., Zmudzki, P., Pietraszek, J., 2018. Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittis melissophyllum L. agitated shoot cultures analyzed by UPLC-MS/MS. PLoS ONE 2018, 13, art. e0202556. DOI: 10.1371/journal.pone.020255610.1371/journal.pone.0202556
• 24.Szczotok, A., Radek, N., Dwornicka, R., 2018. Effect of the induction hardening on microstructures of the selected steels. METAL 2018: 27th Int. Conf. Metallurgy and Materials. Ostrava, Tanger, 1264-1269.
• 25.Ulewicz, R., Selejdak, R., 2018. Impact of Laser Machining on the Structure and Properties of Tool Steels. Materials Research Proceeding, 5, 37-40. DOI: 10.21741/9781945291814-7
• 26.Work Package T1, 2016. BUILD! Transnational hub for common knowledge. MINDCONSULT, 3DCentral project documentation.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).