Synthesis and Characterization of Bioceramics Reinforced Aluminium Matrix Composites

• Autorzy: Bhuvaneswari V. , Rajeshkumar L. , Saravanakumar R. , Balaji D.

Identyfikatory

DOI

10.24425/amm.2022.141045

• Języki publikacji: EN

Abstrakty

EN

Current work attempts to fabricate aluminium alloy AA2219 metal matrix composite (AMC) reinforced with natural bio-based sea shell powder (SSP) which is a ceramic material, in view of improving the mechanical and tribological properties. SSP was characterized by X-Ray Diffraction (XRD) to assess its chemical constituents and particle size. Stir casting route was adopted for fabricating AMCs reinforced with 1, 2 and 3 wt.% of SSP. Energy Dispersive X-ray Spectroscopy (EDS) was used to analyse the formation of secondary elements during casting and scanning electron microscopy (SEM) was used analyze the surface morphology of the composite specimen before and after tribological tests. Hardness, Compressive strength and tribological properties were evaluated using appropriate tests and corresponding ASTM standards. Characterization methods revealed that the formation of secondary elements was very low at 3 wt.% of SSP when compared with other compositions. Hardness and compressive strength was found to be maximum for 3 wt.% of SSP while the specific wear rate and coefficient of friction values were found to be lesser for the same composite when compared with the unreinforced alloy and were on par with the AA2219 composites containing synthetic reinforcements.

Słowa kluczowe

EN

metal matrix composites; bioceramics; hardness; compressive strength; wear rate

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2022
• Tom: Vol. 67, iss. 4
• Strony: 1217--1226
• Opis fizyczny: Bibliogr. 32 poz., rys., tab., wzory

Twórcy

autor

Bhuvaneswari V.

• KPR Institute of Engineering and Technology, Department of Mechanical Engineering, Coimbatore - 641407, Tamilnadu, India

• https://orcid.org/0000-0003-2248-5443

autor

Rajeshkumar L.

• KPR Institute of Engineering and Technology, Department of Mechanical Engineering, Coimbatore - 641407, Tamilnadu, India

• https://orcid.org/0000-0003-1917-5460

autor

Saravanakumar R.

• VSB College of Engineering and Technical Campus, Department of Mechanical Engineering, Coimbatore - 642109, Tamilnadu, India

autor

Balaji D.

• KPR Institute of Engineering and Technology, Department of Mechanical Engineering, Coimbatore - 641407, Tamilnadu, India

• https://orcid.org/0000-0002-8398-5022

Bibliografia

• [1] L. Rajeshkumar, A. Saravanakumar, V. Bhuvaneswari, G. Gokul, D.D. Kumar, M.J. Karunan, Mater Today-Proc. 27, 2645-2649 (2020). DOI: https://doi.org/10.1016/j.matpr.2019.11.087
• [2] M.K. Surappa, Aluminium Matrix Composites: Challenges and opportunities, Sadhana-Acad. P. Eng. s. 28, 319-334 (2003).
• [3] A. Baradeswaran, A.E. Perumal, Compos. Part B-Eng. 54, 146-152 (2013).
• [4] L. Rajeshkumar, A. Saravanakumar, V. Bhuvaneswari, M.P. Jithin Karunan, N. Karthick Raja, P. Karthi, AIP Conf. Proc. 2207, 020005 (2020). DOI: https://doi.org/10.1063/5.0000042
• [5] G. Moona, R.S. Walia, V. Rastogi, R. Sharma, Mater. Res. Express 6, 1165d5 (2019).
• [6] B.S. Yigezu, M.M. Mahapatra, P.K. Jha, Miner. Mater. Charac. Eng. 01, 124-130 (2013).
• [7] L.R.K. Rajeshkumar, Int. J. Eng. Res. Technol. 6, 3-8 (2018).
• [8] K. Alaneme, A. Aluko, Sci. Iran. 19, 992-996 (2012).
• [9] P.K. Rohatgi, JOM. 46 55-59 (1994).
• [10] B. Mathur, P. Kumar, Tech. Rese. Sci. Special. 1-6 (2020).
• [11] L Rajeshkumar, A. Saravanakumar, Particul. Sci. Technol. 38, 228-235 (2019). DOI: https://doi.org/10.1080/02726351.2018.1526834
• [12] A. Saravanakumar, S. Sivalingam, L.R. Kumar, Mater. Today-Proc. 5, 8321-8327 (2018).
• [13] M.O. Bodunrin, K.K. Alaneme, L.H. Mater. Res. Technol. 4, 434-445 (2015).
• [14] S. Dharmalingam, R. Subramanian, K.S. Vinoth, B. Anandavel, Mater. Eng. Perform. 20 (8), 1457-1466 (2010).
• [15] A. Saravanakumar, L. Rajeshkumar, D. Balaji et al., Arab. J. Sci. Eng. 45, 9549-9557 (2020). DOI: https://doi.org/10.1007/s13369-020-04817-8
• [16] K.K. Alaneme, M.O. Bodunrin, A.A. Awe, Engi. Sci. 30, 96-103 (2018).
• [17] N.V. Murthy, A.P. Reddy, N. Selvaraj, C.S.P. Rao, IOP Conf. Ser.-Mat. Sci. 149, 012106 (2016).
• [18] L. Natrayan, M.S. Kumar, K.P. Alanikumar, Mater. Res. Express. 5, 066516 (2018).
• [19] Sharma, Pardeep, Satpal Sharma, Dinesh Khanduja, Asian Ceram. Soc. 3, 3, 240-244 (2015).
• [20] V. Mohanavel, K. Rajan, K.R. Senthilkumar, Appl. Mech. Mater. 787, 583-587 (2015).
• [21] K.M. Shorowordi, T. Laoui, A.S.M.A. Haseeb, J.P. Celis, L. Froyen, Mater. Proc. Technol. 142, 738-743 (2003).
• [22] A. Saravanakumar, R. Saravanakumar, S. Sivalingam, V. Bhuvaneswari, Int. J. Mech. Prod. Eng. Research Dev. 8 (8), 393-399 (2018).
• [23] S.A. Sajjadi, H.R. Ezatpour, H. Beygi, Mater. Sci. Eng. A, 528, 8765-8771 (2011).
• [24] H. Kala, K.K.S. Mer, S. Kumar, Procedia Mater. 6, 1951-1960 (2014).
• [25] V. Bhuvaneswari, L. Rajeshkumar, D. Balaji, R. Saravanakumar, Solid. State Technol. 63 (5), 4552-4560 (2020).
• [26] E.C. Nwanji, P.O. Babalola, Mater. Sci. Eng. 413, 012043. (2018).
• [27] L. Rajeshkumar, K.S. Amirthagadeswaran, Materiali in Tehnologije 53, 57-63. (2019). DOI: https://doi.org/10.17222/mit.2018.122
• [28] S.S. Irhayyim, H.S. Hammood, A.D. Mahdi, AIMS Mater. Sci. 7, 103-115 (2020). DOI: https://doi.org/10.3934/matersci.2020.1.103
• [29] L. Rajeshkumar, R. Suriyanarayanan, K. Shree Hari, S. Venkatesh Babu, V. Bhuvaneswari, M.P. Jithin Karunan, IOP Conf. Ser.: Mater. Sci. Eng. 954, 012008 (2020). DOI: https://doi.org/10.1088/1757-899X/954/1/012008
• [30] T. Adithiyaa, D. Chandramohan, D.T. Sathish, Mater. Today: Proc. 21, 1000-1007 (2020). DOI: https://doi.org/10.1016/j.matpr.2019.10.051
• [31] A. Karthik, R. Karunanithi, S.A. Srinivasan, M. Prashanth, Mater. Today: Proc. 27, 2574-2581 (2020). DOI: https://doi.org/10.1016/j.matpr.2019.10.143
• [32] V. Bhuvaneswari, L. Rajeshkumar, K. Nimel Ross, J. Mater. Res. Technol. 15, 2802-2819 (2021). DOI: https://doi.org/10.1016/j.jmrt.2021.09.090

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).