Analysis of the Possibility of Calculating the Charges on the Example of Brasses

• Autorzy: Biernat S. , Bydałek A. W. , Wołczyński W. , Najman K.

Identyfikatory

DOI

10.1515/amm-2017-0319

• Języki publikacji: EN

Abstrakty

EN

This paper describes the subject of brasses and the method of their production from the secondary raw materials. It focuses on two very important aspects extremely important for today’s world. The first of them is the theme of rational management of materials, particularly metallic scrap. The second issue is the growing importance of products made of brass, which in recent times get also special recognition in medicine. This article presents a proposal for a methodology for calculating the metal charge for brasses of two or more components. It turns out that by using suitable mathematical calculations one can accurately determine the amount of metal charge to obtain a product having the desired chemical composition and desired mechanical properties. Mathematical calculations are also presented in the graphical form for the visualization of dependency and a better explanation of the accepted approach.

Słowa kluczowe

EN

quality management castings; alloy; brass; calculating; batch

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 4
• Strony: 2165--2170
• Opis fizyczny: Bibliogr. 12 poz., rys., tab., wykr., wzory

Twórcy

autor

Biernat S.

• State Higher Vocational School In Głogów, Głogów, Polska

autor

Bydałek A. W.

• University of Zielona Góra, Faculty of Mechanical Engineering, Ul. Podgórna 50, 65-246 Zielona Góra, Polska

autor

Wołczyński W.

• Institute of Metallurgy and Materials Science of Polish Academy of Sciences, Ul. Reymonta 25, 30-059 Kraków, Poland

autor

Najman K.

• Bolmet S. A., Wiechlice 1, Polska

Bibliografia

• [1] M. Kucharski, Recycling of non-ferrous metals (in Polish). Kraków, Wydaw. Akademii Górniczo-Hutniczej im. Stanisława Staszica (2010).
• [2] M. Głowacka, Metallography (in Polish), Gdańsk Wydawnictwo Politechniki Gdańskiej (1996).
• [3] J. Piątkowski, J. Szymszal, F. Binczyk, Calculation of bearing of metal batch with utilization of simplex algorithm (in Polish), Archives of Foundry Engineering 2 (6), 179-188 (2002), ISSN 1642-5308.
• [4] F. Romankiewicz, M. Rybakowski, Modification of selected brass casting (in Polish). Solidification of Metals and Alloys 22, 118-123 (1995).
• [5] S. Rzadkosz, M. Kranz, P. Nowicki, M. Piękoś, Refining processes of selected copper alloys, Archives of Foundry Engineering 9 (2), 29-34 (2009), ISSN (1897-3310).
• [6] M. Kondracki, J. Szajnar, Possibilities for leaded brass replacement with multi-component brass, Archives of Foundry Engineering 7 (2), 57-64 (2007), ISSN (1897-3310).
• [7] E. Ziółkowski, Theoretical basis of the parameters balance algorithm of the charge combined the charge materials with imprecise chemical constitution (in Polish), Archives of Foundry Engineering 19 (6), 443-448 (2006), ISSN 1642-5308.
• [8] S. Biernat. A.W. Bydałek, Optimization of the brass melting, Archives of Foundry Engineering 14 (3), 5 (2014), 10.ISSN (1897-3310).
• [9] A. W. Bydałek. A. Bydałek, The results of the brass refining proces in the reducer conditions, Archives of Foundry Engineering 14 (1), 21-24 (2014), ISSN (1897-3310).
• [10] A. W. Bydałek, H. Paul, K. Najman, D. Balcerek, K. Janas, Intermetalicphasis in the brass in the continous casting (in Polish), Archives of Foundry Engineering 6 (18), 251-256 (2006), ISSN 1642-5308.
• [11] J. Kozana, S. Rzadkosz. M. Piękoś, Assessment of aluminium and silicon influence on strength properties and a microstructure of nickel brasses, Archives of Foundry Engineering 8 (4), 81-86 (2008), ISSN (1897-3310).
• [12] W. Wołczyński, P. Kwapisiński, B. Kania, W. Wajda, W. Skuza, A.W. Bydałek, Numerical Model for Solidification Zones Selection in the Large Ingots, Archives of Foundry Engineering 15, 87-90 (2015

Uwagi

PL

The support provided by the National Center for Research and Development under Project No. PBS3/A5/52/2015

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).