Archives of Civil and Mechanical Engineering - Tom Vol. 22, no. 2 (2022) - BazTech - Yadda

Tom - szczegóły

Tytuł artykułu

Vol. 22, no. 2

Czasopismo

Archives of Civil and Mechanical Engineering

Wydawca

Springer
Wrocław University of Science and Technology

Rocznik

2022

Identyfikatory

Zawartość wolumenu

Vol. 22, no. 2
- artykuł: Elastic stifness estimation of aggregate-ITZ system of concrete through matrix porosity and volumetric considerations: explanation and exemplifcation (Revilla-Cuesta Victor, Skaf Marta, Santamaría Amaia, Romera Jesús M., Ortega‑López Vanesa), s. art. no. e59, 1-17
- artykuł: Constitutive modeling of rock materials considering the void compaction characteristics (Xie Shijie, Han Zhenyu, Chen Yifan, Wang Yixian, Zhao Yanling, Lin Hang), s. art. no. e60, 1--15
- artykuł: The investigation of the optimization scheme of the low‑cycle fatigue cropping based on the acoustic emission technique (Ren Yujian, Li Jingxiang, Dong Yuanzhe, Zhao Shengdun, Liu Boyang, Jin Dong), s. art. no. e61, 1--15
- artykuł: Friction spot extrusion brazing of copper to AISI 304 stainless steel with Zn interlayer: effect of shoulder surface modification (Bai Jing, Paidar Moslem, Mehrez Sadok, Ojo Olatunji Oladimeji, Nasution Mahyuddin Khairuddin Matyuso, Zain Azlan Mohd), s. art. no. e62, 1--15
- artykuł: Mechanical performance of ultra-high-performance strain-hardening cementitious composites according to binder composition and curing conditions (Kim Min-Jae, Oh Taekgeun, Yoo Doo-Yeol), s. art. no. e63, 1--12.
- artykuł: Effect of cold rolling on microstructure and hardness of annealed Al-Cu-Mg alloy (Liu Fei, Liu Zhiyi, He Guangyu), s. art. no. e64, 1--17
- artykuł: Mesomechanical model for concrete creep with viscoelastic interface transition zone (Xu Zehua, Zhao Qingxin, Guo Weichao), s. art. no. e65, 1--15
- artykuł: Investigating the capability of the Lemaitre damage model to establish the incremental sheet forming process (Kumar Pavan, Tandon Puneet), s. art. no. e66, 1--18
- artykuł: Flexural characteristics of artificial ice in winter sports rinks: experimental study and nondestructive prediction based on surface hardness method (Zhang Wenyuan, Li Junxing, Wang Lin, Yuan Baojiang, Yang Qiyong), s. art. no. e67, 1--19
- artykuł: Long-term performance of post tensioned cross laminated timber (CLT) shear walls: hygro mechanical model validation and parametric analysis (Zeng Xiuzhi, He Minjuan, Li Zeng, Luo Qi), s. art. no. e68, 1--18
- artykuł: A new method for identification of cyclic plasticity model parameters (Suchocki Cyprian, Kowalewski Zbigniew), s. art. no. e69, 1--14
- artykuł: Electromagnetic wave absorption performance of UHPC incorporated with carbon black and carbon fiber (Xu Shenchun, Yang Yekai, Wu Chengqing, Liu Kai), s. art. no. e71, 1--17
- artykuł: Tribological and surface morphological characteristics of titanium alloys: a review (Gupta Munish Kumar, Etri Hamza El, Korkmaz Mehmet Erdi, Ross Nimel Sworna, Krolczyk Grzegorz M., Gawlik Józef, Yaşar Nafiz, Pimenov Danil Yu.), s. art. no. e72, 1--23
- artykuł: Study of influence of periodic defects on the propagation of wedge waves using laser ultrasound technique and finite element analysis (Yang Che-Hua, Jeyaprakash N., Fang Chi-Chong), s. art. no. e74, 1--19
- artykuł: Effect of friction surfacing parameters on the microstructural, mechanical properties, and wear characteristic of Al‑Cu‑Mg alloy coating reinforced by nickel aluminide (Farajollahi Ramezanali, Aval Hamed Jamshidi, Jamaati Roohollah), s. art. no. e75, 1--18
- artykuł: Hydrogen evolution reaction (HER) activity of conical Co–Fe alloy structures and their application as a sensitive and rapid sensor for H2O2 detection (Skibińska Katarzyna, Kutyła Dawid, Kula Anna, Gajewska Marta, Marzec Mateusz M., Żabiński Piotr), s. art. no. e76, 1--10
- artykuł: Shear expression derivation and parameter evaluation of Hoek-Brown criterion (Chen Yifan, Lin Hang, Li Su, Cao Rihong, Yong Weixun, Wang Yixian, Zhao Yanlin), s. art. no. e77, 1--9
- artykuł: Manufacturing of fred bricks derived from wastes: utilization of water treatment sludge and concrete demolition waste (Gencel Osman, Kizinievic Olga, Erdogmus Ertugrul, Kizinievic Viktor, Sutcu Mucahit, Munoz Pedro), s. art. no. e78, 1--16
- artykuł: Production and characterization of natural clay‑free green building brick materials using water treatment sludge and oak wood ash (Harja Maria, Gencel Osman, Sari Ahmet, Sutcu Mucahit, Erdogmus Ertugrul, Hekimoglu Gokhan), s. art. no. e79, 1--14
- artykuł: Study on force reduction mechanism in ultrasonic assisted grinding based on single-grain scratching (He Yuhui, Zhang Jiajia, Zhou Weihua, Tang Jinyuan, Xu Yanbin, Zhang Yutong), s. art. no. e80, 1--14
- artykuł: Excavation‑induced structural deterioration of rock masses at different depths (Zhang R., Xie H. P., Ren Li, Deng H. I., Gao M. Z., Feng G., Zhang Z. T., LI X. P., Tan Q.), s. art. no. e81, 1--15
- artykuł: Influence of Fe, Cr, and Cu addition on the microstructure, hardness, and anticorrosion properties of Al-Ni-Y alloys (Babilas Rafał, Młynarek-Żak K., Łoński W., Bukowiec D., Lis M., Kądziołka-Gaweł M., Warski T., Radoń A.), s. art. no. e82, 1--15
- artykuł: Pressure distribution on rectangular tall buildings in boundary layer flows (Lipecki Tomasz), s. art. no. e83, 1--17
- artykuł: AA5052 failure prediction of electromagnetic flanging process using a combined fracture model (Deng Huakun, Mao Yunfei, Li Guangyao, Zhang Xu, Cui Junjia), s. art. no. e84, 1--17
- artykuł: Performance and microstructure analysis of high‑strength concrete incorporated with nanoparticles subjected to high temperatures and actual fires (Tobbala D. E., Rashed A. S., Tayeh Bassam A., Ahmed Tamer I.), s. art. no. e85, 1--9
- artykuł: Shape and packing effects in particulate composites: micromechanical modelling and numerical verification (Majewski Michał, Wichrowski Michał, Hołobut Paweł, Kowalczyk-Gajewska Katarzyna), s. art. no. e86, 1--22
- artykuł: Tailoring the mechanical properties of hypereutectic in situ Al–Mg2Si composites via hybrid TiB2 reinforcement and hot extrusion (Moazami Mohammad Rasool, Razaghian Ahmad, Mirzadeh Hamed, Emamy Massoud), s. art. no. e87, 1--9
- artykuł: Potential of remote sensing data to support the seismic safety assessment of reinforced concrete buildings affected by slow‑moving landslides (Mele Annalisa, Miano Andrea, Di Martire Diego, Infante Donato, Ramondini Massimo, Prota Andrea), s. art. no. e88, 1--22
- artykuł: The study of the evolution of the microstructure and creep properties of Super 304H austenitic stainless steel after aging for up to 50,000 h (Zieliński A., Wersta R., Sroka Marek), s. art. no. e89, 1--24
- artykuł: Effect of filler metal composition on microstructural and mechanical characterization of dissimilar welded joint of nitronic steel and super duplex stainless steel (Maurya Anup Kumar, Pandey Chandan, Chhibber Rahul), s. art. no. e90, 1--28
- artykuł: Fabrication of longitudinal welded tube of aluminum alloy for structural application using friction stir welding process and its characterization (Sen Debolina, Pal Surjya Kanta, Panda Sushanta Kumar), s. art. no. e91, 1--21
- artykuł: Assessment of Reuss, Tamura, and LRVE models for vibration analysis of functionally graded nanoplates (Shahsavari Davood, Karami Behrouz), s. art. no. e92, 1--13
- artykuł: Microstructure and antibacterial properties of a ZnO coating on a biomaterial surface (Basiaga Marcin, Paszenda Zbigniew, Lisoń Julia, Taratuta Anna, Kazek-Kęsik Alicja, Krok-Borkowicz Małgorzata, Nuckowski Paweł, Szindler Magdalena, Staszuk Marcin, Major Łukasz, Major Roman, Barabaszová Karla Čech, Dyner Marcin), s. art. no. e93, 1--18
- artykuł: Prediction of properties of friction stir spot welded joints of AA7075‑T651/Ti‑6Al‑4V alloy using machine learning algorithms (Asmael Mohammed, Nasir Taugir, Zeeshan Qasim, Safaei Babak, Kalaf Omer, Motallebzadeh Amir, Hussain Ghulam), s. art. no. e94, 1--19
- artykuł: Flexural response of FRP‑strengthened lightweight RC beams: hybrid bond efficiency of L-shape ribbed bars and NSM technique (Tahmouresi Behzad, Momeninejad Kasra, Mohseni Ehsan), s. art. no. e95, 1--16
- artykuł: Yield surface characterization for lightweight alloy sheets via an improved combined shear–tension experimental method (Zheng L. H., Wang Z. J., Wan M., Meng Bao), s. art. no. e96, 1--17
- artykuł: Experimental investigation and analysis on the axial compressive performance of recycled concrete‑filled corroded steel tubular columns (Hui Cun, Li Yonggang, Li Ke, Liu Cong, Hai Ran, Li Chunqing), s. art. no. e97, 1--22
- artykuł: Effects of early‑age temperature and salt ion corrosion on the macroproperty deterioration of concrete and corresponding micromechanism (Xue Weipei, Fan Hongjun, Liu Xiaoyuan, Shen Lei), s. art. no. e98, 1--16
- artykuł: Real fracture toughness of FRC and FGC: size and boundary effects (Elakhras A. A., Saleem M. H., Sallam H. E. M.), s. art. no. e99, 1--17
- artykuł: Mechanical and hygrothermal performance of fly-ash and seashells concrete: in situ experimental study and smart hygrothermal modeling for Normandy climate conditions (Bouasria Manal, Benzaama Mohammed-Hichem, Pralong Valéry, El Mendili Yasmin), s. art. no. e100, 1--22
- artykuł: Post-fire behavior evaluation of concrete mixtures containing natural zeolite using a novel metaheuristic-based machine learning method (Ashrafian Ali, Shahmansouri Amir Ali, Bengar Habib Akbarzadeh, Behnood Ali), s. art. no. e101, 1-25
- artykuł: Effect of grinding conditions on the friction and wear performance of Ni based singlecrystal superalloy (Xu Yunchao, Gong Yadong, Zhang Weiqiang, Wen Xuelong, Xin Bo, Zhang Huan), s. art. no. e102, 1--16
- artykuł: Synergistic effect of ball milling time and nano‑sized Y2O3 addition on hardening of Cu‑based nanocomposites (Salur Emin), s. art. no. e103, 1--18

rozwiń roczniki

JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.