Mechanism of origin of structural vibrations in conical roller bearings

• Autorzy: Marchuk V. I. , Ravenets L. M. , Marchuk S. V. , Świć A.
• Języki publikacji: EN

Abstrakty

EN

This paper investigates the mechanism of origin of structural, structural and technological defects of rollers. The technique for integrated indicator of vibration working surfaces of the rings to determine the level of life of the finished part to the operation as part of the bearing and predict the vibroacoustic characteristics of rolling bearings. It was established that technological defects cause low-frequency and high-frequency vibrations. The question about the extent to which it is necessary to strengthen the tolerances on the parameters of bearings on which vibration level is determined not errors bearing parts and their structural properties. Calculated values of the amplitudes vibroacceleration due to the rigidity of the bearing vibrations are so small that in some cases adopted precision calculations turned enough to detect such vibrations. Thus, when tested on the vibro-acoustic installations structural vibration does not play an important role.

Słowa kluczowe

EN

vibroactivity; geometric undulation; structural vibration microtopography; design; technological factors

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2014
• Tom: Vol. 8, nr 23
• Strony: 68--72
• Opis fizyczny: Bibliogr. 11 poz.

Twórcy

autor

Marchuk V. I.

• Lutsk National Technical University, 75 Lvivska Str., Lutsk 43018, Ukraine

autor

Ravenets L. M.

• Lutsk National Technical University, 75 Lvivska Str., Lutsk 43018, Ukraine

autor

Marchuk S. V.

• Lutsk National Technical University, 75 Lvivska Str., Lutsk 43018, Ukraine

autor

Świć A.

• Institute of Technological Information Systems, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland

Bibliografia

• 1. Avdieiev А.М. at al. Methods of Struggle with Vibration of Rolling Bearings. Scientific Engineering Digest “Bearing Industry”, issue 1, NII Nаvtоprоm, 1984, 32–38 [in Russian].
• 2. Balmot V.B. Theory and Methods to Improve Accuracy and Reduce Vibration and Ball Bearing Assemblies. Extended abstract of Doctor’s thesis. 1987, 36 p. [in Russian].
• 3. Danylchenko Yu.М., Kuznetsov Yu.М. Precision Spindle Assemblies for Rolling-contact Bearings (theory and practice). Ternopil, Kyiv, Ekonomichna Dumka, 2003, 344 p. [in Ukrainian].
• 4. Marchuk V.I. Modeling of Dynamical System of Centreless Grinding of Working Surfaces of Roller Bearings. Scientific Notes “Ingeneering Mechanics”, issue 14, 2004, 187–198 [in Ukrainian].
• 5. Rahulskis K.M., Yurauskas А.Yu. Vibrations of Bearings. L.: Mashinostroieniie, Leningrad Department, 1985, 119 p. [in Russian].
• 6. Świć A.: Elastyczne systemy produkcyjne. Technologiczno-organizacyjne aspekty projektowania i eksploatacji. Wydawnictwo Politechniki Lubelskiej, Lublin 1998.
• 7. Świć A. Gola A.: Elements of Design of Production Systems. Methodology of Machine Tool Selection in Casing-Class FMS, Management and Production Engineering Review. Vol. 1 (2), 2010, 73–81.
• 8. Świć A, Taranenko W, Szabelski J. Modelling dynamic systems of low-rigid shaft grinding. Eksploatacja i Niezawodnosc – Maintenance and Reliability 2 (50), 2011, 13–24.
• 9. Świć A. Technologia obróbki wałów o małej sztywności. Wyd. Politechniki Lubelskiej, Lublin 2009.
• 10. Dimentberh F.М. and Kolesnikov К.S. (Eds.) Vibrationin Technics: Directory. Fluctuations of Machines, Constructions and its Elements, 1980, p. 544 [in Russian].
• 11. Zhuravliov V.F., Balmot V.B. Mechanics of Ball Bearings Gyroscopes. Machinebuilding, 1986, p. 248 [in Russian].