Synthesis and Characterization of Si Oxide Coated Nano Ceria by Hydrolysis, and Hydrothermal Treatment at Low Temperature

• Autorzy: Kong M. , Kim H. W.

Identyfikatory

DOI

10.1515/amm-2017-0164

• Języki publikacji: EN

Abstrakty

EN

The purpose of this work was to the application of Si oxide coatings. This study deals with the preparation of ceria (CeO₂) nanoparticles coating with SiO₂ by water glass and hydrolysis reaction. First, the low temperature hydro-reactions were carried out at 30~100°C. Second, Silicon oxide-coated Nano compounds were obtained by the catalyzing synthesis. CeO₂ Nano-powders have been successfully synthesized by means of the hydrothermal method, in a low temperature range of 100~200°C. In order to investigate the structure and morphology of the Nano-powders, scanning electron microscopy (SEM) and X-ray diffraction (XRD) were employed. The XRD results revealed the amorphous nature of silica nanoparticles. To analyze the quantity and properties of the compounds coated with Si oxide, transmission electron microscopy (TEM) in conjunction with electron dispersive spectroscopy was used. Finally, it is suggested that the simple growth process is more favorable mechanism than the solution/aggregation process.

Słowa kluczowe

EN

nano-particle; water glass; hydro-reaction; coating method

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 2B
• Strony: 1125--1129
• Opis fizyczny: Bibliogr. 16 poz., rys., wzory

Twórcy

autor

Kong M.

• R&Bd Center, KTD C&S Co., Ltd., Incheon 21687, Korea (Republic of)

autor

Kim H. W.

• Division of Materials Science and Engineering, Hanyang University, Seoul 04763, Korea (Republic of)

Bibliografia

• [1] Y. Zhang, K. Suenage, C. Colliex, S. Iijima, Science 281, 973 (1998).
• [2] R. Zhang, Y. Lifshitz, S. Lee, Adv. Mater. 15, 635 (2003).
• [3] Y. Li, Y. Bando, D. Golberg, Y. Uemura, Appl. Phys. Lett. 83, 3999 (2003).
• [4] Y. Yin, Y. Lu, Y. Sun, Y. Xia, Nano Lett. 2, 427 (2002).
• [5] Y. Wang, Z. Tang, X. Liang, N. Liz-Marzan Kotov, Nano Lett. 4, 225 (2004).
• [6] M. Ahmad, T. Khan, G. Ali, J. Akhter, Rev. Adv. Mater. Sci. 51, 427 (2006).
• [7] H. Gleiter, Prog. Mater. Sci. 33, 223 (1989).
• [8] Y. Lu, Mat. Sci. Eng. R. 16, 161 (1996).
• [9] M. Meyers, A. Mishra and D. Benson, Prog. Mater. Sci. 26, 43 (2010).
• [10] R. Ormerod, Chem. Soc. Rev. 32, 17 (2003).
• [11] A. Hetznecker, H. Kohler, U. Schonauer, U. Guth, Sensor and Actuators B: Chemical 99, 373 (2004).
• [12] E.C. Ziemath, B.Z. Saggioro, J.S. Fossa, J. of Non-Crystalline Solids 351, 3870 (2005).
• [13] X. Li, Z. Cao, Z. Zhang, H. Dang, Applied Surface Science 252, 7856 (2006).
• [14] Z. Guo, F. Du, G. Li, Z. Cui, Inorganic Chemistry 45, 4167 (2006).
• [15] Q. Fang, X. Liang, R.S.C Adv. 2, 5370 (2012).
• [16] Y. Liu, G. Zhao, D. Wang, Y. Li, National Science Review 2, 150 (2015).

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)