Selected aspects of drilling waste management in Poland

• Autorzy: Jamrozik A. , Ziaja J. , Gonet A. , Fijał J.

Identyfikatory

DOI

10.7494/drill.2015.32.3.565

• Języki publikacji: EN

Abstrakty

EN

One of the main problems related to environmental protection in the search for hydrocarbon deposits are drilling waste. In these article the authors presented their research results on the toxicity of drilling muds and suggested the possibility of their utilization. Research material represents drilling waste collected during prospecting for both conventional and unconventional deposits of oil and gas in the Polish Lowlands, Pomerania, the Carpathians and the Carpathian Foredeep.

Słowa kluczowe

EN

drilling waste; spent water-based drilling muds; drilling waste management

• Wydawca: AGH University of Science and Technology Press
• Czasopismo: AGH Drilling, Oil, Gas
• Rocznik: 2015
• Tom: Vol. 32, no. 3
• Strony: 565--573
• Opis fizyczny: Bibliogr. 12 poz., wykr., rys.

Twórcy

autor

Jamrozik A.

• AGH University of Science and Technology, Faculty of Drillin g, Oil and Gas, Krakow, Poland

autor

Ziaja J.

• AGH University of Science and Technology, Faculty of Drillin g, Oil and Gas, Krakow, Poland

autor

Gonet A.

• AGH University of Science and Technology, Faculty of Drillin g, Oil and Gas, Krakow, Poland

autor

Fijał J.

• AGH University of Science and Technology, Faculty of Geolog y, Geophysics and Environmental Protection, Krakow, Poland

Bibliografia

• [1] Bakke T., Klungsøyr J., Sanni S.: Environmental impacts of produced water and drill-ing waste discharges from the Norwegian offshore petroleum industry. Marine Envi-ronmental Research, vol. 92, 2013, pp. 154–169.
• [2] Czekaj L., Fijał J., Grzywnowicz I., Jamrozik A.: Influence of drilling waste on selected physicochemical properties of coherent ground. AGH Drilling, Oil, Gas, vol. no. 1, 2005, pp. 111–116.
• [3] CzekajL., Fijał J., Gonet A., Stryczek S., Grzywnowicz I., Macnar K.: Detoxication of Drilling Waste Contaminated with Oil Products and their Management in Ground Environment on the Example of Podkarpacie District. Mineralogia Polonica – Special Papers, vol. 33, p. 51 [Mid-European Clay Conference Zakopane, Poland, September 22–27, 2008].
• [4] Fijał J., Gonet A., Stryczek S., Czekaj L.: Destabilization of colloidal microstructure of used drilling mud by reactive composites – management of treated wastes. Min-eralogia – Special Papers, vol. 33, 2008, p. 58 [4th Mid-European Clay Conference, Zakopane, Poland, September 22–27, 2008].
• [5] Gonet A., Czekaj L., Fijał J., Grzywnowicz I., Knez D., Rzyczniak, Stryczek S., Żurek R.: Metody przetwarzania organiczno-mineralnych odpadów wiertniczych w aspekcie ich zagospodarowania, ed. A. Gonet. Wydawnictwa AGH, Kraków 2006, pp. 3–230.
• [6] Hudgins, C.: Chemical use in the North Sea oil and gas. E & P. Journal Petroleum Technology, vol. 46, 1994.
• [7] Jamrozik A.: Możliwości kompleksowego recyklingu odpadowych płuczek wiert-niczych [Possibilities of complex recycling of drilling fluids waste]. Wydawnictwa AGH, Kraków 2009.
• [8] Jamrozik A., Gonet A., Stryczek St, Czekaj L.: Possibilities and conditions for desali-nization of drilling waste. AGH Drilling, Oil, Gas, vol. 27, 2010, pp. 183–192 [21stIn-ternational Conference Oil-Gas AGH Zakopane, May 27–29, 2010].
• [9] Jamrozik A., Gonet A., Fijał J., Terpiłowski K., Czekaj L.:Analysis of waste mud sta-bility. AGH Drilling, Oil, Gas, vol. 31, no. 1, 2014.
• [10] NeffJ.M.: Composition, Environmental Fates, and Biological Effects of Water Based Drilling Muds and Cuttings Discharged to the Marine Environment: a Synthesis and Annotatet Bibliography. Petroleum Environmental Research Forum (PERF) and American Petroleum Institute, Batelle, Duxbury, MA 2005.
• [11] Macnar K.: Badania wpływu składu i właściwości odpadów wiertniczych na dobór technologii recyklingu, odzysku lub unieszkodliwiania. PhD. Thesis, AGH University of Science and Technology, Faculty of Drilling, Oil and Gas, Krakow 2014.
• [12] Wysocki S.: Floculation of bentonite suspensions and salted drilling mud with new cationic flocculants (PT-floc-201107). AGH Drilling, Oil, Gas, vol. 27, no. 4, 2010, pp. 759–764.