PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The tribological characteristics of SiC particle reinforced aluminium composites

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The paper presents the results obtained from tribological tests of F3S.20S aluminium composite material containing (20% (v/v) SiC and AlSi9Mg alloy). The tests were carried out on raw samples (without thermal treatment) and on samples subjected to T6 thermal treatment (solutioning and ageing). This composite is applied as a modern construction material in automotive industry for manufacturing of pistons and brake discs. Significant change in properties of these materials is possible as a result of SiC reinforced particles introduction. Therefore ball-on-disc wear tests have been carried out. The analysis of microstructure was carried out in upper layer of matrix and composite after wear tests. It has been demonstrated that SiC reinforced composite is characterized by lower wear in comparison to the matrix and that adhesive and abrasive wear were the dominant phenomena during the tests.
Rocznik
Strony
116--123
Opis fizyczny
Bibliogr. 28 poz., rys., tab., wykr.
Twórcy
autor
  • Lublin University of Technology, Department of Materials Engineering, 36 Nadbystrzycka Street, 20-618 Lublin, Poland
autor
  • Main School of Fire Service, Fire Safety Engineering Faculty, Department of Firefighting Technique, Applied Mechanics Section, 52 Słowackiego Street, 01-629 Warsaw, Poland
  • Wrocław University of Technology, Institute of Production Engineering and Automation, Section of Plastic Forming Processes, 5 Łukasiewicza Street, 50-371 Wrocław, Poland
Bibliografia
  • [1] J. Bieniaś, M. Walczak, B. Surowska, J. Sobczak, Microstructure and corrosion behavior of aluminium fly ash composites, Journal of Optoelectronics and Advanced Materials 5 (2) (2003) 493–502.
  • [2] S.X. Huang, K. Paxton, A Macrocomposite Al brake rotor for reduced weight and improved performance, Journal of Metals 50 (8) (1998) 26–28.
  • [3] V.R. Rajeev, D.K. Dwivedi, S.C. Jain, Effect of load and reciprocating velocity on the transition from mild to severe wear behavior of Al–Si–SiCp composites in reciprocating conditions, Materials and Design 31 (2010) 4951–4959.
  • [4] R.N. Rao, S. Das, Wear coefficient and reliability of sliding wear test procedure for high strength aluminium alloy and composite, Materials and Design 31 (7) (2010) 3227–3233.
  • [5] M.N. Rittner, Expanding word markets for MMCs, JOM 52 (11) (2000) 43.
  • [6] J. Sobczak, Metal Composite Materials, Wyd. Instytutu Odlewnictwa i Instytutu Transportu Samochodowego, Cracow-Warsaw, 2002 (in Polish).
  • [7] T.R. Hemanth, R.P. Kumar, T.K. Swamy, Chandrashekar, Taguchi technique for the simultaneous optimization of tribological parameters in metal matrix composite, Journal of Minerals & Materials Characterization & Engineering 10 (12) (2011) 1179–1188.
  • [8] J. Sobczak, Metal Matrix Composites. Current State and Development Prospects in the Light of Science Policy Technology and Industrial Practice of the United States, Wyd. Instytutu Odlewnictwa, Cracow, 1996 (in Polish).
  • [9] J. Śleziona, Fundamentals of Composites Manufacturing, Wyd. Pol. Śląskiej, Gliwice, 1998 (in Polish).
  • [10] J.U. Ejiofor, R.G. Reddy, Developments in the processing and properties of particulate Al–Si composites, Journal of Metals 47 (11) (1997) 31–37.
  • [11] Z. Górny, J. Sobczak, Metal matrix composites fabricated by the squeeze casting process, Transactions of the Foundry Research Institute, Special Issue 55 (42) (1995) 23–25 (in Polish).
  • [12] H.Y. Chu, J.F. Lin, Experimental analysis of the tribological behaviour of electroless nickel-coated graphite particles in aluminium matrix composites under reciprocating motion, Wear 239 (1) (2000) 126–142.
  • [13] A. Vencl, I. Bobic, S. Arostegui, B. Bobic, A. Marinković, M. Babić, Structural, mechanical and tribological properties of A356 aluminium alloy reinforced with Al2O3, SiC and SiC + graphite particles, Journal of Alloys and Compounds 506 (2) (2010) 631–639.
  • [14] K.N. Tandon, Z.C. Feng, X.Y. Li, Wear behavior of SiC particulate reinforced aluminium composites sliding against steel balls under dry and lubricated conditions, Tribology Letters 6 (2) (1999) 113–122.
  • [15] B. Challen, R. Barnescu, Diesel Engine Reference Book, Butterworth-Heineman, Oxford, 1999.
  • [16] S. Mahdavi, F. Akhlaghi, Effect of the graphite content on the tribological behavior of Al/Gr and Al/30SiC/Gr composites processed by in situ powder metallurgy (IPM) method, Tribology Letters 44 (1) (2011) 1–12.
  • [17] H. Mindivan, E.S. Kayali, H. Cimenoglu, Tribological behavior of squeeze cast aluminium matrix composites, Wear 265 (5– 6) (2008) 645–654.
  • [18] A. Mishra, R. Sheokand, R.K. Srivastava, Tribological behaviour of Al-6061/SiC metal matrix composite by Taguchi's techniques, International Journal of Scientific and Research Publications 2 (10) (2012) 1–8.
  • [19] D. Rudnik, J. Sobczak, Composite Pistons of Internal Combustion Engines, Wyd. Instytutu Transportu Samochodowego, Warsaw, 2001(in Polish).
  • [20] Z. Chłopek, A. Jakubowski, A study of the particulate matter emission from the braking systems of motor vehicles, Maintenance and Reliability 44 (4) (2009) 45–52.
  • [21] J. Sobczak, Prospects for development of metal composites in automotive industry, Przegląd Odlewnictwa 49 (4) (1999) 127– 134 (in Polish).
  • [22] A. Wojciechowski, J. Sobczak, Composite Brake Discs of Road Vehicles, Wyd. Instytutu Transportu Samochodowego, Warsaw, 2001 (in Polish).
  • [23] A. Wojciechowski, Influence of reinforcing phase composite aluminium alloy based on selected properties brake disc, (Dissertation ITS), Lublin University of Technology, Lublin, 2001 (in Polish).
  • [24] I. Hyla, J. Śleziona, J. Myalski, Production technology and properties of selected aluminium alloys reinforced with ceramic particles, Inżynieria Materiałowa (6) (1993) 180–184 (in Polish).
  • [25] J. Wieczorek, J. Śleziona, J. Myalski, A. Dolata-Grosz, M. Dyzia, Surface wear and structure after collaboration in dry sliding conditions in MMCs AK12 and ceramic particles Al2O3, Composites 6 (3) (2003) 131–136 (in Polish).
  • [26] PN-76/H-88027, Casting aluminium alloys, Grade, Polish Committee for Standardization, UKD 669.715.018.28.
  • [27] G.B. Veeresh Kumar, C.S.P. Rao, N. Selvaraj, Studies on mechanical and dry sliding wear of Al6061–SiC composites, Composites: Part B 43 (3) (2012) 1185–1191.
  • [28] D. Cree, M. Pugh, Dry wear and friction properties of an A356/ SiC foam interpenetrating phase composite, Wear 272 (1) (2011) 88–96.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-f126b26c-c060-42b2-899e-7479acc73a13
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.