High-performance high-speed WIM for sustainable road load monitoring using GIS technology

• Autorzy: Kim Jong Woo , Jung Young Woo , Utebayeva Ainura , Kamaliyeva Zhuldyz , Collins Neil , Sarbassov Dastan , Sagin Janay , Amanzhlova Raushan

Identyfikatory

DOI

10.21307/tp-2021-067

• Języki publikacji: EN

Abstrakty

EN

The increasing importance of better transport connectivity has indicated the need to develop high-speed road load monitoring technologies. The Belt and Road Initiative (BRI), Silk Road transportation programs considerable have developed the roads and highways networks in Kazakhstan and other Central Asian (CA) countries. Transportation services require proper maintenance and prompt track load monitoring. There is no holistic freight traffic management system that controls and monitors traffic flow in CA. A Weigh in Motion (WIM) technology can be used as an effective traffic management control system in the CA region. The WIM technology is designed to control axle and gross vehicle weight in motion. It has a wide range of applications, including pavement and bridge weight control, traffic legislation and state regulations. The WIM technology has advantages over conventional static weighing as it does not interrupt traffic flow by creating queues at monitoring stations. The WIM technology can be used not only as a weight control tool but also performs a comprehensive analysis of other traffic flow parameters. In cooperation with Korean UDNS experts with suport from KAIA, we test the application of WIM in Nur-Sultan city, North of Kazakhstan, with Siberian-type cold weather. These works create much challenges and innovative approach to test sensors in the harsh environment, from the extreme cold to hot temperatures, with intensive dust distortions. Our Talapker WIM pilot test site was installed in September 2020, and it performs Gross Vehicle Weight (GVW) and Axle of Weight (AOW) analyses. The Talapker WIM High Speed (HS) sensors are capable of detecting different driving patterns, including everyday driving, acceleration or deceleration more than 10km/h/s and eccentric driving (partial contact with the platform to avoid excessive weighting). The pilot Talapker HS WIM site has demonstrated a positive effect on implementing WIM technology in Kazakhstan. Every 10th car passing through the WIM site registered as an overloaded vehicle by gross weighting, and every 5th car is considered overloaded by axle weighting. GIS-based location allocation analysis (LAA) performed in the given study provided an understanding of a practical implementation of WIM sensors. Taking into consideration different geographical data, the WIM site map was developed to reveal 43 suitable locations. Further improvements for the CA road network and their WIM demand points will be the focus of future research investigations.

Słowa kluczowe

EN

WIM; weight-in-motion; silk road; one belt; KAIA

PL

WIM; ważenie pojazdów w ruchu; jedwabny szlak; jeden pas; KAIA

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Transport Problems
• Rocznik: 2021
• Tom: T. 16, z. 4
• Strony: 149--162
• Opis fizyczny: Bibliogr. 15 poz.

Twórcy

autor

Kim Jong Woo

• UDNS Co., Ltd, A-517, U-TOWER Building, 767, Sinsu-ro, Suji-gu, Yongin-si, Gyeonggi-do, 16827 Republic of Korea

autor

Jung Young Woo

• UDNS Co., Ltd, A-517, U-TOWER Building, 767, Sinsu-ro, Suji-gu, Yongin-si, Gyeonggi-do, 16827 Republic of Korea

autor

Utebayeva Ainura

• Nazarbayev University, Kabanbay Batyr Av. 53, Nur Sultan, 010000, Republic of Kazakhstan

autor

Kamaliyeva Zhuldyz

• Nazarbayev University, Kabanbay Batyr Av. 53, Nur Sultan, 010000, Republic of Kazakhstan

autor

Collins Neil

• Nazarbayev University, Kabanbay Batyr Av. 53, Nur Sultan, 010000, Republic of Kazakhstan

autor

Sarbassov Dastan

• Nazarbayev University, Kabanbay Batyr Av. 53, Nur Sultan, 010000, Republic of Kazakhstan

autor

Sagin Janay

• Nazarbayev University, Kabanbay Batyr Av. 53, Nur Sultan, 010000, Republic of Kazakhstan

autor

Amanzhlova Raushan

• Nazarbayev University, Kabanbay Batyr Av. 53, Nur Sultan, 010000, Republic of Kazakhstan

Bibliografia

• 1. Bacharz, M. & Chmielewski, J. & Stawska, S. & Bacharz, K. & Nowak, A. Comparative analysis of vehicle weight measurement techniques - evaluation of SiWIM system accuracy. Auburn University. 2020. 42 p.
• 2. Baring, J. & Koniditsiotis, C. Australia’s intelligent access program. In: Proc. of Int. Heavy Vehicle Conference HVParis2008 (HVTT10-ICWIM5). 2008. Paris, May 19-22. Eds. B. Jacob, EJ O’Brien et al. ISTE/Hermes, London.
• 3. Belt and Road Initiative. 2021. Belt and Road Initiative. Available at: https://www.beltroadinitiative.com/belt-and-road/.
• 4. Bouteldja, M. & Jacob, B. & Dolcemascolo, V. Optimization design of WIM multiple sensor array by an energetic approach. In: Proc. of Int. Heavy Vehicle Conference HVParis2008 (HVTT10-ICWIM5). 2008. Paris, May 19-22. Eds. B. Jacob, EJ O’Brien et al. ISTE/Hermes, London.
• 5. Burnos, P. & Gajda, J. Thermal property analysis of axle load sensors for weighing vehicles in weigh-in-motion system. Sensors. 2016. Vol. 16(12). P. 1-11. DOI: 10.3390/s16122143.
• 6. COST323 European specification on weigh-in-motion of road vehicles, EUCOCOST/323/8/99, LCPC. 1999. Paris, August. 66 p.
• 7. Cantero, D. & González, A. & Damage, B. Detection using weigh-in-motion technology. Journal of Bridge Engineering. 2015. Vol. 20(5). P. 245-268. DOI: 10.1061/(ASCE)BE.1943-5592.0000674.
• 8. Rys, D. & Judycki, D.J. & Jaskula, P. Analysis of effect of overloaded vehicles on fatigue life of flexible pavements based on weigh in motion (WIM) data. International Journal of Pavement Engineering. 2015. Vol. 17(8). P. 716-726. DOI: 10.1080/10298436.2015.1019493.
• 9. Jacob, B. Proceedings of the Final Symposium of the project WAVE (1996-99). Paris, May 6-7, 1999. Hermes Science Publications, Paris. 352 p.
• 10. Jacob, B. Weigh-in-Motion of axles and vehicles for Europe. Final Report of the Project WAVE, LCPC, 2002. Paris. 103 p.
• 11. Jacob, B. & Feypell-de La Beaumelle, V. Improving truck safety: potential of Weigh-in-Motion technology. IATSS Research. 2010. Vol. 34(1). P. 9-15. DOI: 10.1016/j.iatssr.2010.06.003.
• 12. Prozzi, J.A. & Hong, F. Effect of Weigh-in-Motion system measurement errors on load-pavement impact estimation. Journal of Transportation Engineering. 2007. Vol. 133(1). DOI: 10.1061/(ASCE)0733-947X(2007)133:1(1).
• 13. Lansdell, A. & Wei, S. & Dixon, B. Development and testing of a bridge Weigh-in-Motion method considering nonconstant vehicle speed. Engineering Structures. 2017. Vol. 152. P. 709-726. DOI: 10.1016/j.engstruct.2017.09.044.
• 14. Lydon, M. & Taylor, S.E. & Robinson, D. &Mufti, A. & Brien, E.J.O. Recent developments in bridge weigh in motion (B-WIM). Journal of Civil Structural Health Monitoring. 2015. Vol. 6(1). P. 69-81. DOI: 10.1007/s13349-015-0119-6.
• 15. Moses, F. Weigh-in-Motion system using instrumented bridges. Transportation Engineering Journal of ASCE. 1979. Vol. 105(3). P. 233-249. DOI: 10.1061/tpejan.0000783.